Reviews
Good product
The delivery was quite fast, I was really surprised by the delivery time, only that the product is smaller than I expected but it is an original and good quality product --------------- ------------------------------------------- The delivery was quite fast, I really surprised the delivery time, only that the product is smaller than I expected but it is an original product and good warm Powered by Google Translator View detail
Fits: HONDA Dio 110, HONDA diocesan, HONDA TODAY., HONDA gyro canopy, HONDA monkey, HONDA PCX125, HONDA gyro canopy, HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA diocesan, HONDA diocesan, HONDA diocesan, HONDA diocesan, HONDA Lead 110 (EX), HONDA monkey, HONDA monkey, HONDA monkey
HondaOEMGrip heater
Installed on HA-02 with no problem at all.
Since the Handlebar Cover was attached at the same time, it feels so hot that it is the strongest in the northern part of Tokyo about now.
Is it ok to wear summer Gloves inside for safety?
OEM Product is good for peace of mind.
View detail
Always in contact with the plating at the base of the RightBlinker
OEM Product with Style emphasis ?Grab Bar alternative,
I purchased and installed the Blinker, but it always hits the base of the Blinker during installation. I expected that it would escape firmly in the installed state, but as expected the Right remained in contact.
If you look closely, you can see that theQuantity:Pair (for Left and Right) The dimensions are not contrasted in
As per other reviewers, the accuracy seems to be poor depending on the lot.
I have an external Shock installed, and since the upper side is covered, I have to put up with it to prevent theft, but I would like it to be replaced with a good one if possible.
View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Filter exchange
ManufacturerOEMOil Filter is used for CB1100EX.
The OEM exhaust system was easy to replace, and although I am not particular about the oil filter, I can use the OEM filter with confidence.
View detail
Fits: HONDA Africa Twin Adventure Sports ES, HONDA Afriva Twin Adventure Sports, HONDA Africa Twin
Fast change
Good morning, the product arrived in 10 days. Perfectly packaged. The product is original Honda, complete with all its parts. I recommend purchasing on Webike ----------------- ----------------------------------------- Good morning, the product arrived in 10 days . Perfectly raised. The product is original Honda, complete with all its parts. Powered by Google Translator View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Honda orginal oil filter
This is orginal honda oil filter, if you are honda biker must use this original oil filter. Good quality and super fas shipping. View detail
Same as genuine
After purchasing the existing CT125, the change pedal was silver.
I was looking for WeBike because it didn't fit the tuning concept I wanted.
I ended up purchasing it.
First of all, the installation went without a problem, but the tabs on the fixing screws were slightly misaligned, so it felt like I had to force the screw to turn.
Satisfaction after installation is the best.
Attach photos. -------------------------------------------------- -------- The change pedal is silver after purchasing the existing CT125 I was looking for Webike because it didn't match the tuning concept I wanted. I bought it. Once installed, it was without a problem, but I felt that the screws of the fixed screw did not fit. After installation, satisfaction is the best. Attach photos. Powered by Google Translator
View detail
RossiGrip
From the original OEMGrip to a new, identical OEM.
I bought a new pair of white gloves only for the left side because the left side was very dirty.
It seems to be Spec. as it gets dirty the same way even though it is new.
It is becoming more and more likely that Gloves has a problem.
View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
Sleek Engine Guard for CB400SF
On the pictures, we could see the nice packaging provided. It is simple to install. Unlike other engine guard which is big and bulky, this is sleek, minimal and classy. It looks like it comes with the bike, it does not looks out of place. The black colour matches the body frame of the Honda CB400SF. View detail
Classy Look for CB400SF
The Honda CB400SF without the meter visor was naked looking. Now with the additional meter visor installed, it produces the classy naked bike look, and it is diverting air flow to the rider's chest and above area, providing more comfort during riding. View detail
Beautiful Dashboard for CB400SF
You can see from the collage pictures, the before and after applying the CB400SF meter panel. I have chosen the silver colour to match my bike. The whole dashboard looks so much livelier, it brings out the quality of the Honda CB400SF. View detail
OEM
I used masking tape to measure the position of the tape and apply it precisely. Silicon-off degreasing is also necessary. It looks cool now. View detail
Excellent OEM Centerstand
Installed on a 2014 Honda CTX700. Bikes should come with centerstands from factory we all know this. Especially if they have the mounting points for them. Finding one for this bike was unusually difficult. Retailing at around $200 + shipping. This was a cheaper option at $150 with the chain stop shipped. Not to mention Honda built. Can't go wrong. Now brakes jobs and chain adjustments are a breeze. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Mounted on CUB, OEMBasket
It bumps and dents here and there, but it is sturdy and easy to use.
This is my third Repeat.
If you don't bump it like I did, I believe it will last for decades. The price is about $2500, so I think it is a good one.
View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Purchased in conjunction with engine oil change
I purchased this to replace my HondaOEMOilG3.
This purchase was cosmetically pleasing and helpful, as I replace it every two Oil changes.
Since the car has been over-marketed (74,000Km), we try to replace the oil as soon as possible.
If something happens to Engine, I can explain it to the Dealer with pride.
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 50 (AA04), HONDA Benry 110, HONDA Benly 110 Pro, HONDA Benry., HONDA Benly Pro, HONDA cross-cub 110
Used for SEA BASSK50
I installed it on my SEA BASSK50. As expected of a Honda OEM, it is well made and looks good when mounted on a motorcycle. I used to have a tool box from Home center, but the quality was totally different and I knew that a motorcycle-specific product was the way to go. The price is reasonable and I am very satisfied. View detail
troublesome to install
The comfort is good for the Large change, but the installation is too cumbersome.
Theoretically, it is easy to attach, but it is still troublesome to attach the collar and screw it in through the narrow space of the Carrier.
So I am stopping at Elastic band.
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 50 (AA04), HONDA Benry 110, HONDA Benly 110 Pro, HONDA Benry., HONDA Benly Pro, HONDA cross-cub 110
Lightweight, increased capacity
I had an OEM Carrier with an extended Carrier and a SteelBox (Honda option), but I was concerned about the weight, so I changed the Carrier to a KIJIMA Rear Carrier and also changed the Box to this one. I think the previous Hohe is better in terms of looks, but the lightness and increased capacity are a world of difference. I will use StickerTune to make it more to my liking. View detail
This is the one for SS!
[How is it used?
I installed it on a 2020 CBR1000RR-R.
Was the one you received as per Image?
As you would expect from an OEM, it is just like the Image. The construction is solid and the color is the same as the color around the tail cowl. When moving the vehicle, the right hand is placed on the seat part of the single seat cowl. (Black part) It is applied to the "I", but it is a slightly uncomfortable touch that seems to be slightly frayed. If it tears, it is Shock, so you may not want to touch it too much.
Was the installation difficult?
It is very easy to replace the Tandem seat.
How was your experience with it?
Nothing has changed in terms of functionality, but there is a big difference between having it and not having it.
The tension is also increased when a single seat cowl is attached.
View detail
a good choice
Quality and texture information rubber is not secured It charges well for the feeling of use Goods to Buy Together 09-01-0001 Remove the installation difficulty light and connect the power source Cost performance and comparison with other products are more reliable than simple USB ports WeBike packaging is always great, arriving in a week for delivery and packaging Concern, precautions, or advice on purchase The USB port is broken, so I chose the cigar socket because I thought it would be difficult to replace it, so I could use it for a long time View detail