Reviews
Fits: HONDA Africa Twin Adventure Sports ES, HONDA Afriva Twin Adventure Sports, HONDA Africa Twin
AFT 1100 OEM Quick Shifter
Perfectlly working mainly from 2nd to above gears. 1st to 2nd still need some adjustment or skill improvement. Anyway very easy to install (detailed instructions) and configure. View detail
Very happy with PannierBody.
The OEM design of the vehicle is a good thing, as it matches the body of the vehicle and allows for a much larger load capacity.
I am very satisfied with the one key system and the discreetness of the bracket when it is removed.
However, I am not happy with the Gold amount, as it costs almost 150,000 for Rear Carrier + SupportBracket + PannierBody + Keys all together.
View detail
Meter visor installation
With the right tools, it was not too difficult to install. Maybe a larger size would be better for wind protection. View detail
To commemorate a reservation to purchase a vehicle
I have reserved a 2024 CB650RECLutch.
Since I have some time left before the delivery of the car, I would like to prepare a few Option Parts that I can install by myself.
Back at home, I hurriedly went to webike to register My Motorcycle and search for Parts.
As a start, I found and purchased the OEMTank Pad.
OEMPartsSale was being held and I was able to purchase it at a lower price than the Dealer.
The product was in stock and arrived about 2 days after ordering.
The actual product proved to be a solid product, just like OEMParts.
The CB's Logo is also reliable.
However, I think that a slightly larger size would be more effective in preventing tank wounds.
View detail
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail
We will prepare all the necessary parts before delivery.
I have reserved a 2024 HondaCB650RECLutch.
We are looking for Option Parts for delivery of the car, which is still undecided.
With the Points I have saved up to now due, I decided to purchase the Tank Pad I needed first.
I found the OEMTank Pad on webike's vehicle search and bought it immediately.
It was in stock and delivered the next morning.
Since it is OEMParts, I don't have to worry about quality, and I am happy to be able to buy at a discount with Sale Discount and Points.
I don't have the vehicle yet, but I think the size is a little small.
View detail
I consider it an ornament.
Knee grip does not match the knee position well.
Nonsense as scratch prevention.
Looks nice, good Accent on the Tank.
I bought it cheap and knowingly dared to buy it, so I have no complaints.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
As expected
The key was a little tricky to install.
That's the OEM!
The sense of unity when installed is wonderful.
It's a streamlined design, so it's more than the actual capacity.
It's nice that it doesn't hold any luggage.
View detail
It is Large strange to remove the Meter.
It was LARGE weird to remove the meter. Pay a labor charge and have a store do it! View detail
Knuckle guard and Extension
I referred to the Instruction Manual on the Manufacturer's website and was able to install it without any problems. View detail
Fits: HONDA Rebel300, HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA CL250, HONDA CL500
Yes on the left side, not sure on the right side...
The bag itself is great. Good quality, well made, looks good. I fitted one on the left side of my GB350, amazing. I bought a second one for the right side of the bike, and the bottom almost touches the exhaust. If it's full with something heavy it will definitely touch. Considering how hot the exhaust gets, I'm not convinced this is very safe and that it will last long. Check the photo attached to this review! As for the delivery, 5 days door to door from Japan to Australia, impressive! View detail
Easy installation
This is a HONDAOEMOption that adds a gorgeous texture to the Indicator Lamp area of the Meter.
Installation is easy
Simply degrease and clean the mounting surface, peel off the backing paper of the Body's Double-sided Tape, and affix it.
Hairline-style finishes and understated Logo bring Accent to the view from the Owner.
I feel no discomfort and wish it had been included from the beginning.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
We value usability more than appearance.
The Basket is a little small in size, but it's for my use. (A little storage of Gloves and Helmet when you stop and a little shopping) The Basket itself is equipped with a stopper to prevent luggage from flying out, which gives me a sense of security when shopping.
The installation itself is not as difficult as that of the front carrier, and I would recommend this product.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110
I'm just trying to get the Basket installed.
SUPER CUB110 (JA59) installed with reference to YouTubeetc. videos
I need to drill a hole to install the bolt, but I think it is difficult to drill a hole to insert the bolt into Beauty unless I have the right tools.
(You need to save some BALI to get the Bolt that comes with it.) Nipper, File, and Leutor would be useful.
The most Large strange part of the installation is the drilling and cowl removal mentioned above, so once that is done, installation is easy.
One thing to keep in mind is that you may break a plastic nail when drilling or removing a cowl, so if you have no experience in cowl removal, etc., it may be safer to ask a contractor to do it for you.
View detail
The installation diagram is confusing and the Meter cannot be removed.
It's OEM, so the price is not an issue, but the Harness pull is very confusing and distressing. View detail
Machined and installed on JA55
JA55 cannot be installed without modification.
The difference from OEMPedal is that the length of the groove cut in the Spline is longer than OEM and the bend angle of the Pedal is different.
The processing performed was,
Cut the Spline section to the same length as the OEM with a sander and weld it.
When I stepped forward on Shift, Pedal hit the footpeg Arm, so I cut it down to the point where there was no interference.
I am concerned about the strength of the areas that have been cut away, so I would like to try and find a way to do this.
View detail
Single seat cowl
I didn't install it when I bought my new car because I didn't feel I needed it, but when I saw it installed on another car, I was attracted by its cool look, so I bought it.
I am very satisfied with the new seat and the new look of the seat is much better than before.
One of my concerns is that when applying the rear stand, I had to grab the rubber part of the Seat Stopper instead of the entire tandem seat, which is a little more difficult.
View detail
Loaded documents can be easily stored.
The Bolt 4 fixings can be secured with the upper lock and unlocked with the car body key.
The OEM Tool Box can easily hold a CALI card or Maintenance Notebook, which would otherwise have to be folded all the way down.
The Bracket also has a helmet lock function, but if a large box is installed in the Carrier, the key may interfere with the lock and make it impossible to open the box.
View detail
Required to fix side box
Required to install HondaOEMOption side box.
Merit, which can be opened and closed with the car body key because of the one-key system, is good, but the work of repeatedly inserting and removing six different tumblers into the key cylinder to assemble it is detailed and large and strange.
Perhaps because the Screw holes were painted, it was difficult to get Bolt into the Carrier holes.
Also, the price is pretty good for the quality, so I would have been happy if it was around 20,000 commissions.
View detail