Reviews
It works pretty well
Existing screen at low speeds (about 30 km) I replaced it with a long schooner, and found that it was more than effective in reducing wind noise.
It might be a little hot when driving at high speeds in midsummer, right? By the way, the helmet is SHOEIJForce4.
View detail
Just a good Size
I replaced Cowl with Chinese Cowl, but there was no Honda Logo, so I bought one.
The size is just Exactly and I am very happy with it.
When applying in winter, warming it up with Dryer will improve adhesion and make it easier to remove the protective Seat from the surface.
View detail
Maintenance Essentials
We use it to order parts when servicing our motorcycles.
I can look it up from HondaHP, but it is a hassle to open a PC or smart phone, etc., etc,
I purchased the Parts List, which is a paper publication. (It's expensive).
The beauty is that you can search for Parts immediately.
Parts prices are also displayed so you can estimate your maintenance budget.
I plan to use it for a while, so I think a Parts List is essential.
You can learn the names and functions of the Parts.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
We value usability more than appearance.
The Basket is a little small in size, but it's for my use. (A little storage of Gloves and Helmet when you stop and a little shopping) The Basket itself is equipped with a stopper to prevent luggage from flying out, which gives me a sense of security when shopping.
The installation itself is not as difficult as that of the front carrier, and I would recommend this product.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110
I'm just trying to get the Basket installed.
SUPER CUB110 (JA59) installed with reference to YouTubeetc. videos
I need to drill a hole to install the bolt, but I think it is difficult to drill a hole to insert the bolt into Beauty unless I have the right tools.
(You need to save some BALI to get the Bolt that comes with it.) Nipper, File, and Leutor would be useful.
The most Large strange part of the installation is the drilling and cowl removal mentioned above, so once that is done, installation is easy.
One thing to keep in mind is that you may break a plastic nail when drilling or removing a cowl, so if you have no experience in cowl removal, etc., it may be safer to ask a contractor to do it for you.
View detail
It is already a Copy Version.
While I was wondering about the purchase, the monkey became New Model and it is already a Copy Version!
The work itself is fine, but the price is the same as with Color Page, so I feel like I lost money (laughs).
If you plan to disconnect from Motorcycle shop, you can use it all you want, but you may not get it out of Vinyl because you want to stay connected.
View detail
Without Honda Front carrier...,
Cannot be installed without HondaFront carrier.
However, I think the Design is very good.
I don't feel the windproof effect is very effective, I think Windshield, another company, would be more effective.
View detail
As a front carrier....
The front carrier is not large enough to do the job, and other companies' front carriers have a larger footprint.
I think
Designed for JA65, the Honda OEM Windshield cannot be installed without this Carrier.
However, after installing the Carrier/Windshield on the body, I think it looks very good on the CT110 HUNTER CUB.
I guess it depends on the individual, but I personally am very satisfied.
View detail
Clutch Side inner diameter is too thick and does not fit at all.
The temperature control, the grip, and the length of the Harness are perfect. However, the inner diameter of the clutch side is too thick to fit even when the temperature is raised, and the molded rubber is shredded. The molded rubber was shredded. Even if I put my weight on it, the motorcycle would move so much that it would fall over, and it wouldn't fit. View detail
The installation diagram is confusing and the Meter cannot be removed.
It's OEM, so the price is not an issue, but the Harness pull is very confusing and distressing. View detail
Fits: HONDA CRF250M, HONDA CRF250 RALLY, HONDA CBR250 R, HONDA CB250F
OEM is secure
OEM so it's a simple installation, and the rubber packing mating is nice. View detail
The explanation is hard to understand for an OEM Product.
It's OEM, so the length is nice. However, the schematic of the pullout did not show the location of the Controller, and I noticed it when I was looking at Motorcycle's undercarriage. I wanted it to be a picture at least. There are many kinds of bundle wire Band, but they are too thick to fix the Harness and cannot be used as instructed. View detail
Fits well on NC750X DCT 2023
Received the order within the week via EMS. Item fits well on my NC750XDCT 2023. Workshop installed the stand and works perfectly although the bike is generally heavy thus can be difficult to mount/dismount. Highly recommended. View detail
Machined and installed on JA55
JA55 cannot be installed without modification.
The difference from OEMPedal is that the length of the groove cut in the Spline is longer than OEM and the bend angle of the Pedal is different.
The processing performed was,
Cut the Spline section to the same length as the OEM with a sander and weld it.
When I stepped forward on Shift, Pedal hit the footpeg Arm, so I cut it down to the point where there was no interference.
I am concerned about the strength of the areas that have been cut away, so I would like to try and find a way to do this.
View detail
Necessary for maintenance
I'm worried about not having this when I need help with maintenance.
I was a little surprised to see it in 3D.
View detail
Authentic Honda Quickshifter
The item was an authentic original Honda Quickshifter for transalp. I have already installed it and is working nicely. View detail
Comfort seat installed.
Replaced the front seat at the same time and it is very fluffy and comfortable.
The design is cool and I am satisfied with it.
Installation is easy and can be replaced with a simple push-in.
I wonder if the price is too high to replace the front and rear...
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Cb400Sf main stand
Wow item is very easy to fix and solid too. Shipment is fantastic! Super fast shipment! Definitely will purchase more! Thanks Webike! View detail
Single seat cowl
I didn't install it when I bought my new car because I didn't feel I needed it, but when I saw it installed on another car, I was attracted by its cool look, so I bought it.
I am very satisfied with the new seat and the new look of the seat is much better than before.
One of my concerns is that when applying the rear stand, I had to grab the rubber part of the Seat Stopper instead of the entire tandem seat, which is a little more difficult.
View detail
It's a relief to have it and fun to watch.
I had never bought a service manual before, but I thought it would be a bit more clerical, but it's just a book.
My body is 2BK-MC51, but 8BK after model change is also included.
View detail