Reviews
Meter visor installation
With the right tools, it was not too difficult to install. Maybe a larger size would be better for wind protection. View detail
To commemorate a reservation to purchase a vehicle
I have reserved a 2024 CB650RECLutch.
Since I have some time left before the delivery of the car, I would like to prepare a few Option Parts that I can install by myself.
Back at home, I hurriedly went to webike to register My Motorcycle and search for Parts.
As a start, I found and purchased the OEMTank Pad.
OEMPartsSale was being held and I was able to purchase it at a lower price than the Dealer.
The product was in stock and arrived about 2 days after ordering.
The actual product proved to be a solid product, just like OEMParts.
The CB's Logo is also reliable.
However, I think that a slightly larger size would be more effective in preventing tank wounds.
View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail
We will prepare all the necessary parts before delivery.
I have reserved a 2024 HondaCB650RECLutch.
We are looking for Option Parts for delivery of the car, which is still undecided.
With the Points I have saved up to now due, I decided to purchase the Tank Pad I needed first.
I found the OEMTank Pad on webike's vehicle search and bought it immediately.
It was in stock and delivered the next morning.
Since it is OEMParts, I don't have to worry about quality, and I am happy to be able to buy at a discount with Sale Discount and Points.
I don't have the vehicle yet, but I think the size is a little small.
View detail
I consider it an ornament.
Knee grip does not match the knee position well.
Nonsense as scratch prevention.
Looks nice, good Accent on the Tank.
I bought it cheap and knowingly dared to buy it, so I have no complaints.
View detail
It is Large strange to remove the Meter.
It was LARGE weird to remove the meter. Pay a labor charge and have a store do it! View detail
Knuckle guard and Extension
I referred to the Instruction Manual on the Manufacturer's website and was able to install it without any problems. View detail
Easy installation
This is a HONDAOEMOption that adds a gorgeous texture to the Indicator Lamp area of the Meter.
Installation is easy
Simply degrease and clean the mounting surface, peel off the backing paper of the Body's Double-sided Tape, and affix it.
Hairline-style finishes and understated Logo bring Accent to the view from the Owner.
I feel no discomfort and wish it had been included from the beginning.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
We value usability more than appearance.
The Basket is a little small in size, but it's for my use. (A little storage of Gloves and Helmet when you stop and a little shopping) The Basket itself is equipped with a stopper to prevent luggage from flying out, which gives me a sense of security when shopping.
The installation itself is not as difficult as that of the front carrier, and I would recommend this product.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110
I'm just trying to get the Basket installed.
SUPER CUB110 (JA59) installed with reference to YouTubeetc. videos
I need to drill a hole to install the bolt, but I think it is difficult to drill a hole to insert the bolt into Beauty unless I have the right tools.
(You need to save some BALI to get the Bolt that comes with it.) Nipper, File, and Leutor would be useful.
The most Large strange part of the installation is the drilling and cowl removal mentioned above, so once that is done, installation is easy.
One thing to keep in mind is that you may break a plastic nail when drilling or removing a cowl, so if you have no experience in cowl removal, etc., it may be safer to ask a contractor to do it for you.
View detail
The installation diagram is confusing and the Meter cannot be removed.
It's OEM, so the price is not an issue, but the Harness pull is very confusing and distressing. View detail
Machined and installed on JA55
JA55 cannot be installed without modification.
The difference from OEMPedal is that the length of the groove cut in the Spline is longer than OEM and the bend angle of the Pedal is different.
The processing performed was,
Cut the Spline section to the same length as the OEM with a sander and weld it.
When I stepped forward on Shift, Pedal hit the footpeg Arm, so I cut it down to the point where there was no interference.
I am concerned about the strength of the areas that have been cut away, so I would like to try and find a way to do this.
View detail
Single seat cowl
I didn't install it when I bought my new car because I didn't feel I needed it, but when I saw it installed on another car, I was attracted by its cool look, so I bought it.
I am very satisfied with the new seat and the new look of the seat is much better than before.
One of my concerns is that when applying the rear stand, I had to grab the rubber part of the Seat Stopper instead of the entire tandem seat, which is a little more difficult.
View detail
Texture is good.
Being an OEM, I think it is Simple and very good. View detail
Fits: HONDA NC750 DCT, HONDA NC750, HONDA INTEGRA S, HONDA INTEGRA, HONDA CTX700, HONDA NC700, HONDA NC700 DCT, HONDA CTX700N DualClutchTransmission
OEM sense of security
I am very happy with the OEM Product, I also ordered the O-ring at the same time and replaced it with a new one. View detail
BlackMotorcycle
Bought as MotorcycleDecal in Black, Stripe and Quantity.:I will put it up at Set! View detail
Blackout and good ♪
It is sold as an OEMOption for the CT110 HUNTER CUBJA65, but can be diverted to JA55 with no problem.
Since it is Foldable, it may be effective in Damage reduction when hitting Pedal on forest roads.
It is also painted in Blackout and is a delight as a Dress-up.
Snap Ring Pliers are necessary for the work. A pick tool or other tools may also be helpful when removing and attaching various springs.
New Split Pin and Snap ring are included.
View detail
Grip replacement
This is a replacement from the original Honda OEMGrip.
The price is reasonable for HondaOEM, the design is better than the original OEM, I like it.
The grip is not bad.
View detail
RossiGrip
From the original OEMGrip to a new, identical OEM.
I bought a new pair of white gloves only for the left side because the left side was very dirty.
It seems to be Spec. as it gets dirty the same way even though it is new.
It is becoming more and more likely that Gloves has a problem.
View detail
It is not noticeable when the Bag is removed!
It can be easily installed with only a Hexagonal Wrench, and is simple but well built.
However, the Instruction Manual is not enclosed and must be obtained from the Internet. We felt that it would be more helpful to include the Instruction Manual if possible.
View detail