Reviews
Decal Paste
The spacing was slightly out of alignment with the Decal on the CBR400R22 Tank. View detail
Don't buy it, it's very bad, it's not good at all, don't buy it, it's bad, don't buy it, the tax is too high, I paid twice the price of what you bought it for, don't buy it.
Do not buy, very bad, not good at all, do not buy, bad, do not buy, tax is too high, I paid twice the price of the price you bought, do not buy --------------------------- ---------------------------- Don't buy it too bad, it's not good at all, don't get it bad, the tax is too high, I paid twice the price you bought. Powered by Google Translator View detail
Service manual required if you want to install it yourself….
I am a beginner of Custom, but when I bought it to install it by myself, I found that the contents of the Instruction Manual is almost the same as the Service Manual, and I think the level of difficulty is high. By the way, the manual costs about 15,000 yen.
I wish you'd say it first, Hon.
View detail
Always in contact with the plating at the base of the RightBlinker
OEM Product with Style emphasis ?Grab Bar alternative,
I purchased and installed the Blinker, but it always hits the base of the Blinker during installation. I expected that it would escape firmly in the installed state, but as expected the Right remained in contact.
If you look closely, you can see that theQuantity:Pair (for Left and Right) The dimensions are not contrasted in
As per other reviewers, the accuracy seems to be poor depending on the lot.
I have an external Shock installed, and since the upper side is covered, I have to put up with it to prevent theft, but I would like it to be replaced with a good one if possible.
View detail
defective
It is perfect as a Grip heater.
However, there is a terrible flaw in that the Switch cover falls off due to vibration while driving.
Moreover, there are no replacement parts and the entire body must be replaced.
View detail
I purchased the wrong one.
I purchased the wrong product. View detail
The entire surface of the Rubber surface of the opened product is deteriorated to White.
The entire front and back of the Rubber front and back are White and muddy, as if the supposedly new item had been left unused for years.
(I can only assume Rubber is deteriorating)
It is not in a condition to be put on a very new car revel 1100 BlackTank.
The box was packaged inside as a quasi-positive part of Honda, but does the person in charge check the actual item before sending it?
Since I do not trust the product description (Net photo), I would like to purchase it again after checking the actual item at MotorcycleSHOP.
We will confirm the return by phone separately.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Honda CB400SB Main stand
Purchased on July 21
I bought a new car and the delivery date was too late in September.
Unopened, still in storage
On the day of delivery, the car was opened and temporarily assembled.
The hole in the standbody that fixes it to the vehicle body is deformed and pitted.
Shafts are not being inserted.
It's been over a month since I purchased it.
being in a state of crying oneself to sleep
It was a PointUPCampaign and I bought it early.
I wish I had bought it from Dealer.
I didn't know this was possible with OEM Parts...
View detail
HONDA MONKEY KEYS
HELLO I have recived my keys order but the keys are not European standard . or if it com out of the photos it is not very clear and I can not choose the model of my HONDA MONKEY motorcycle . thank you . View detail
I'll ask the store to install it!
It is a Honda OEM, but the Installation Instruction Manual is unfriendly and has some errors, and the standard working time of 0.7 hours is a lie. It took me one whole day.
The Tap on the Screw hole was not good and the Nut was gnawed off.
In addition, what was more Large strange was the process of reinstalling the LeftBlinker.
This is not a problem with this component, but with the Rebel 1100 itself.
The blinker of REBEL1100 is made of rubber for the attachment to the shaft. The distance between the two is nearly 2.5 meters, and it is difficult to install without pulling on the rubber. What kind of work do you do in your store?
I gave up after almost half a day of trying and managed to make a JointBracket out of Stainless Steel flat plate and installed it. It does not interfere with the function or operation.
We heartily recommend that you ask a store to install the ScreenCowl on the REBEL 1100.
View detail
High!
To pay over $3,000 for something like this is ridiculous! View detail
I can't install it!
As mentioned in the Review, the position of the Bracket was not correct and could not be installed. View detail
The rear blinker was scratched.
Blinker parts were scratched.
Apparently, the Carrier was slightly distorted, so it was in constant contact with the Right Blinker.
I was riding unnoticed and the scratches got deeper.
It sucks
View detail
Fits: HONDA DIO, HONDA TODAY, HONDA DIO CHESTA
Wrong shape, not usable.
It's the wrong shape, it's useless? You wasted Gold? View detail
Not worth buying. Should be outside the company.
It's impossible.
It is OEM Product, so the quality is outstanding. There is no doubt about the texture, the compact appearance, the accuracy of the product, and the color harmony with the car body. We can say that it is better than any other products in this respect.
It is very easy to install, even I am an amateur, the installation time is about 10 minutes. The accuracy is that good.
If anyone can recommend it, is it someone who is not using it as a Rear Carrier and wants a SMART look?
Well, here's the thing:as the Title says, it's not worth buying in my personal opinion.
First of all, it doesn't reach the minimum required capacity as a Rear Carrier by any margin. What can be loaded with 3kg load capacity? If you are a person who put on the gear box, you can't load anything because the gear box itself becomes 3kg.
Also, even if you load a carrier bag with camping equipment, it will exceed 3kg. Even if it exceeds the load a little, it doesn't break. You should buy a large and solid rear carrier.
The price is much higher because it is an OEM product, and the cost performance is much lower than other brand products. It is crawling on the ground.
Moreover, it is too compact and processing is necessary when fixing the base of the Rear box. I don't know what the Rear Carrier is for.
If you're considering buying one, take a look at the Other Brand Product.
You can get great stuff for much less.
I would recommend this product to anyone who can buy this product with a proper purpose.
There is almost no influence when driving by the way. Although the load to the rear wheel increases slightly, it is almost the same. Drive with the same caution on rainy days.
Although it became the above-mentioned severe criticism, there is accuracy only in the OEM Product.
If you're buying for the right reasons, why not buy it?
View detail
Fits: HONDA Super Cub MD, HONDA Super Cub Pro, HONDA solo, HONDA MD90 (Postal CUB), HONDA MD70 (Postal CUB), HONDA CL50, HONDA MD50 (Postal CUB), HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110
It didn't come with the CUB110 JA07.
It is not attached to CUB110 JA07. View detail
Fits: HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100, HONDA CB1100 RS, HONDA CB1100 EX
Defective continuity? Wasted money in the Garbage bin!
There was no instruction manual, but I installed it because I had seen the word of mouth when I let it interrupt the connector in the Left Side Cover. The result did not conduct and it became the waste of the Garbage box going. View detail
seat cowl
I have not received my package and I am not satisfied with the webike service thank you for fixing the problem I will make a recourse on the web View detail
Fits: HONDA CRF250M, HONDA CRF250 RALLY, HONDA CBR250 R, HONDA CB250F
I sent a substitute without explanation
15410 KYJ 902 arrived? Of course without any explanation.
Although it seems to be possible to use it by examining it, it inquires to Webike from here from here, and the answer is
【Order OEM Parts Number "15410 KYJ 901" It became an alternative part of.
Please be assured that you can use the parts themselves without problems. ■ OEM Parts Number Division About ProductNo Integration and Change to Alternative ProductNo
Regarding the OEM Parts Number, we will occasionally integrate the Department ProductNo at Manufacturer, change to an alternative ProductNo etc.. There is.
Especially old vehicles of old age often substitute out-of-stock parts with other usable parts.
In addition, the parts themselves may change due to Reduction in cost or improvement.
As for the parts after change Manufacturer has confirmed conformity, so you can use it without problems.
However, appearance etc.. May differ from the original parts, so please note that beforehand]
If so, from the beginning told me so, the goods are still on sale at 15410 KYJ 901! That's funny Webike
View detail
As a function of Grip is the lowest
It is an impulse using over a year.
The function of Heater was not a problem but the minimum function as a grip is bad.
I drive without much grasping as my own driving, but depending on Gloves Axel will return in my hand and I can not concentrate on driving. It can not be OEM's Grip or outside Grip.
Perhaps I think the surface is caused by resin rather than Rubber quality.
The material is a problem, long time (About 12 hours including break) Numbness was occurring in the palm when driving. This is also a symptom that was not before changing the Grip.
There is more than that, I'm worried about replacing it with OEMGrip.
View detail