Reviews
Just the right length.
I bought the Side Mount Meter Kit for my 250TR.
I mistakenly bought this ShortMeter cable to match the one in the kit.
The length of the cable is just right for the side mount.
View detail
Wiring, Re-Crimping
Wiring (Disconnection) It is old and I bought it for re-assembly. The price is reasonable and good. I thought this was the one I wanted because it was Gold in the picture. When I received it and saw it, it was a silver one.
It's inexpensive, crimpy, and if it connects properly, there's no problem.
View detail
Poor quality
First off, it's a fiberglass fender, not metal. Then fender itself has a terrible finish that came scratched. Second, it will require the fork tubes to be removed completely to install. It will not fit between the forks in any way other wise. For the price I am extremely disappointed. To return from the US to Japan will be a massive headache. So upset. View detail
There are many similar products, but this one is enough!
The Harley Shovel's Blinker stopped working, and after investigating a broken ball and a faulty Relay, I thought it was a faulty Switch and purchased this product.
There were various similar products in other Brand, but I chose this one with good cosmetics.
It was easy to replace as it was almost identical to the Blinker switch that was already on it.
The new one still works well with the Switch and the Blinker lights up well after installation.
Horn is using a different switch, so I put insulated tape around the Horn wire and Tie Wrapped it to the other wires.
The texture of Plating is good, so I am satisfied.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Light Bracket exchange
When I replaced the Blinker, I had to replace the OEM Bracket because it had a hole in it.
The work itself is easy, but the Instruction Manual is not included, so you need to check and replace it by yourself.
When replacing with OEMLight, the Light position is 1cm lower than OEM and 3cm forward
You can't use the Bracket for angle adjustment, so you have to make it yourself or fix it in two places.
Since the space between the Meter and the Light becomes wide, the mounting position of the Meter may be a concern.
View detail
Think about the overall Balance.
I bought this for the balance of the vehicle. I installed it with a little rearrangement because the seat of Bolt which tightens it hangs on the part of the radius. I am satisfied with the position as I wanted. View detail
Replace because it's getting tired
I bought this type to replace the Power Filter which was installed when I bought the car. The intake air seems to have improved. View detail
Exhaust System was broken.
Exhaust System broke in about 2 months. View detail
Exhaust System replacement!
Powerful Sound and Power also went up.
I really like the design and the ease of the replacement process.
View detail
goods Throttle Wire
I'm going to stop being a member. View detail
wind chime
The wind noise is there and the volume doesn't go down, and it may be because of the length thing, but I think there is a little problem to call it Inner silencer. View detail
Wind Cutting sound?
If you don't get into the back side, the wind noise is quite loud. View detail
even if only a little
I'm sure every little bit helps, but I wonder what the exhaust efficiency will be? View detail
even if only a little
I'm hoping it will muffle the sound a bit. Now I'm worried about the exhaust efficiency. View detail
I will not buy it again.
There is no Instruction Manual, so I don't know how to open it.
The product is also full of scratches. I will not return or exchange it because it is too much trouble, but I will not buy it again.
View detail
Fits: Others , KAWASAKI VULCAN400, KAWASAKI W400, KAWASAKI W650, KAWASAKI 250TR, SUZUKI VOLTY, SUZUKI RV200 VANVAN, SUZUKI ST250, SUZUKI GRASS TRACKER, YAMAHA XS650, YAMAHA RENAISSA, YAMAHA SRV250, YAMAHA VIRAGO250, YAMAHA DRAGSTAR250, YAMAHA TW225, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, HONDA V-TWINMAGNA MAGNA250, HONDA SHADOW
It looks surprisingly good.
Back Mirror to be used by clamping to Front fork.
I introduced it to make the front area simple.
I thought that this kind of Mirror is design priority, and it is necessary to sacrifice the practicality, but surprisingly, the rear visibility is not so bad. The visibility is like the Type which is slightly enlarged and projected.
The image used is that of looking backwards over your shoulder or arm, as opposed to looking over your shoulder or arm with a standard Mirror.
Note that the amount of eye movement increases. I use normal Mirror for Right Side and this for Left Side.
If you drive on the Bypass with the flow of cars, it will be blurred. I don't know what type of car is following me, but I can check whether there is a car or not.
For installation, the supplied bolt is too long, so I prepared a stainless bolt separately. If you don't mind, you can leave it as it is.
Also, I don't know the size of the screw that stops Bracket and MirrorBody. I couldn't find the right size of wrench among the tools I have. So I use a small Hexagonal Wrench and tighten it to the extent that I don't lick it.
The rear view is not bad and I am generally satisfied with the Custom that I aimed for.
View detail
Installed on w650
It gives a Cafe feeling and old car feeling.
It is also Large in size and has a windproof effect.
Because it is a Universal Product, it needs to be installed with ingenuity.
Also, some of them get squishy due to wind pressure, so it's a good idea to reinforce them.
View detail
textured good feeling
I bought a similar product before but the texture was not good. I liked this consumption because of the texture. View detail
It makes it easier to operate
It prevents dirt and wound from sticking to the shoes by Shift operation, and the operability of SHIFT UP becomes much better. It can be fixed firmly and does not gap. The cowhide leather is strong and good quality, and it will be used for a long time. View detail
Fits: YAMAHA TW225E, YAMAHA TW200, YAMAHA TW225E, YAMAHA TW200
When the car body is lowered, lower the STAND.
After I installed Reinforcement Spring, I changed to Short Type because the height of the car went down and I couldn't use Normal stand.
You can use the existing STAND spring and bolt.
good point
When stopping the car, the body of the car is stable and can be stopped.
Just replace the Bolt and Spring from NORMAL.
No problem in terms of strength.
The design is also black so it doesn't stand out too much.
A bad point
Please don't use it for the car body which is not lowered. It is dangerous to use it because the body of the car tilts like a large.
You don't want to knock over the motorcycle you've just finished, do you?
The height of the vehicle and the length of the STAND are Large cut.
Please check.
View detail