Reviews
The product is great. Nice chrome on top with plastic on bottom. The button very good. The shipping take a little bit long, about twenty days. View detail
Fits: YAMAHA TW225E, YAMAHA TW200, YAMAHA TW225E, YAMAHA TW200
About Short Stand
I put on the Lowdown shock and also made the STAND Short. I'm worried about it getting caught in the Pants sometimes. View detail
Coloring is a nice Parenthesis.
I like the design of the key holder and the coloring of Orange and Black. the key holder is made of rubber so it won't get scratched when you put it on your motorcycle. View detail
To prevent the License plate from bending
The Fender Eliminator prevents the license plate from being bent, and the license plate part that can be seen directly from the back is material.:The body is made of FRP, so it is very light and strong. View detail
Matte Black is also a nice touch.
The Blinker that I used before is a Plating type. The Blinker that I used before is a Plating type thing and I liked it because it is Harley with a lot of Plating parts, but because Rust has increased, it is a change to Matte Black. It is a good feeling. View detail
I think it's good
I installed it on my TW200E and I can ride my motorcycle with confidence now that it has better footing.
The ride is lumpy, but it's inevitable.
View detail
It's a must-have for Touring.
This is a must-have portable ashtray for smokers and I always carry it with me when touring. The design is good and the quality of the leather is very good so it will last a long time. View detail
Fits: YAMAHA tricker, KAWASAKI W400, KAWASAKI W650, YAMAHA SR400, YAMAHA SR500, YAMAHA XS650, KAWASAKI W400, KAWASAKI W650, YAMAHA SR400, YAMAHA SR500, YAMAHA XS650
Mounted on Kawasaki w800
I bought it to mount a bateslight on Kawasaki w800. The mounting difficulty is very easy and the light can be repositioned back and forth. There is no problem with the use, but there is some movement when the force is applied. View detail
Refresh the part you can see, but don't care much about!
Because the OEM Product is discontinued, I purchased it.
Size measured. 28mm in width and 3.5mm in thickness
It was
OEM Product is 26mm wide and 4.1mm thick
The thickness of the belt is becoming thinner, and of course, it needs to be adjusted to the original for processing.
View detail
It's not very flashy.
It's not as flashy as other recent LED bulbs, but it's the most stable and superior in terms of function and performance, and it's not fashionable, but it doesn't interfere with night driving. View detail
The ETCBody is nice without being visible from the outside.
I chose this one because I was worried about my footing with Wise's ETCKit.
The color is a nice finish as well as the NORMAL blueish gray.
Side cover with key lock to prevent theft.
The ETC is fixed with magic tape, so it looks good to get in and out of the card.
I was worried that the corners would rub against each other because of the stepping, but it doesn't interfere with my feet too much either.
View detail
Buy on RSVfor Silencer
I bought it for my RMX250S RSVfor Silencer.
This one product was the perfect size for Silencer.
It's nice and easy to handle and comes with a winding needle Gold, which is a great help.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
good
I was a little worried because I had failed once with another external intake manifold with a different shape, but it was cheap! You're early! Normal! I will continue to buy it as long as it is an OEM CVcarburetor
Performance, quality, and feel are OEM alternatives, so I'll rate them as normal It's practically a perfect score
View detail
Cosmic Forced Fall Type Fuel Cock
Because the Fuel Cock made by PINGEL broke down, it was purchased as a substitute for the Fuel Tank The PINGEL Adapter plate1/4NTP is used as it was installed
Reserve switching compared to my previous PINGEL 4000 Series Timing is slightly faster (Lots of Reserve capacity.) 。
Switching Lever is stiff, but otherwise there is no problem in use
View detail
I'm trying..
If the Silencer of the external Chamber of STREET MAGIC110 deteriorates over time I've been using Glass Wool, but this time I'm going to try out Stainless Wool I wrapped it around the inside of the Glass Wool The sound quality is not annoying The sound quality is a bit bass-heavy but not annoying View detail
If you're looking for texture, you're in luck
I used it for TW200
Handlebar is 22.2φ but it's a souvenir I bought at BALI
The accuracy is a bit more subtle
The texture is very nice.
Normally, the plastic Throttle would be in the Gold genus or something like that
I don't want to be a little cheesy! This may be good for people who are
I've combined it with the same Cable from GOODS and the NIBBI carburetor
The insertion point of the wire is a little stiff and not fully inserted
I put the Engine on and the Wire was hanging up a bit
The wire insertion point is cut out and the wire is inserted into the throttle first
It was easy to install
Maybe it's because the paint on the Handlebar was a bit of a Sugar Crystal finish
Does it feel a little heavy when you twist it, like aluminum or stainless steel? The smooth one
I think it's a good idea to use the Resistance Small measure
I think it fits the STREET type of Custom
The round, smooth design is also a nice touch
I wanted to use NIBBIOEM because it was TRACKER flavored
I didn't see it on LineUp
We were happy enough here as well
View detail
Ideas product!
It was installed as a decorative plate on the reverse side of the License Plate
The Number's reverse side looks tighter now that I've installed it!
The product itself was a little distorted, but if you co-tighten it to the back of Number, there is nothing wrong with it
View detail
The M10 Cap Bolt fits in nicely
As the product name suggests, the Cap bolt is Exactly fit
The top surface as well as the width is now almost twilit
There are other components like this, but I wanted some strength from the Bolt's seat I chose this product for its long distance to the welded surface
Because it is Steel, it is naturally heavy, but it is saved because it is for Welding
Accuracy was outstanding and right on the drawing board
View detail
Fits: KAWASAKI W400, KAWASAKI 250TR, SUZUKI ST250, KAWASAKI W650, SUZUKI GRASS TRACKER, HONDA GB250 CLUBMAN, HONDA CB400SS, YAMAHA SRV250, YAMAHA SR500, HONDA FTR223, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA DRAGSTAR250, Others , YAMAHA SR400, YAMAHA XS650, YAMAHA RENAISSA, YAMAHA VIRAGO250(XV250), YAMAHA TW200, YAMAHA TW225E
to be pretty
In the past, I used to use the grip of an uncoated white collar. Even if I use it only a few times, I had to wash it often because it was very black. So this time, I was looking for a new grip and saw that it was coated. Actual usage is considerably thicker than genuine grips. If you drive for more than an hour, your hands get stiff. But if it's a good thing, it's coated so it doesn't burn easily. This is the best part. View detail
Seem very big
I buy it because I change my number board and would like have something new. It is plain sliver color and very simple design so I love it and buy it to try. After I get it, I think this may be to large for my number board. So I still not yet decided to install it. Anyway, the quality seem good. Hope it will fit my board View detail