Please login to check coupons
Product Detail
Specification
[Color]・Chrome
[Material]
・Alloy
[Size]
・1/4" NPT
・Screw diameter of insertion part: Approx. 13.1mm
・Cock position: 90 degrees
[Components]
・Body x 1
Description
Universal gas cock!
It can be installed on all universal tanks.
Universal gas cock with a screw diameter of approximately 13.1mm.
Please check the size of the mounting part and choose the compatible cock!
Also, please check the position of the faucet to determine whether the hose outlet is "straight" or "90 degrees".
It can be installed on all universal tanks.
Universal gas cock with a screw diameter of approximately 13.1mm.
Please check the size of the mounting part and choose the compatible cock!
Also, please check the position of the faucet to determine whether the hose outlet is "straight" or "90 degrees".
Caution
*Installation of the cockIt is common to install the cock as it is, but if you do that, it is almost certain to leak, so please wrap the "sealing tape" which is used for water pipes.
It is very basic, but still important.
By the way, if the direction of the screw and the direction of the sealing tape are wrong, the sealing tape will peel off as soon as you tighten the screw.
(Even if the direction is actually wrong, it will not leak because the pressure is not that high.)
Do not over-tighten the cock when installing in the tank.
If the sealing tape is wrapped, it will not leak if it is tightened to some extent.
Tighten the cock by hand, and after it becomes hard, use a wrench to set it to the best position to face the front after about one or two turns.
Over-tightening may cause damage to the cock and tank.