Reviews
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Helping to improve Fee Rings
I use it on my ZX-14R High-grade model. There is a way to install the center out, but no matter how many times I tried, it didn't feel right and the pad rolls back excessively when driving, and the lever is held too deeply at the first breaking. I recommend this product to those who are interested in Piston firings, as it can ensure repeatability during maintenance. View detail
Required Level for Z900RS
I bought a Z900RS as a new car, and even though it has been inspected for 1000km, the GEAR Feel was bad or GEAR was missing.
The original Feel is when the GEAR is raised below 3000 RPM. Gutcheon." It was awkward because Timing to return Clutch was gapping like "One TEMPO13 delayed and GEAR changes.
GEAR shedding occurred when GEAR changing was done in a relaxed manner, also under 3000 RPM.
*I ride a Ninja 250/1000 and have never been out of GEAR.
So I had to turn it up to 4000 or more every single time to raise the GEAR.
After installing this product, there is no sense of insecurity when GEAR changing under 3000 RPM, and GEAR does not enter with one TEMPO13 delay.
To be honest, I wish RecallLevel would fix the Z900RS regarding Shift feel...
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
It looks good
Well, better than OEM Rubber.
However, for some reason, the pin that stops the pin was difficult to get into, so I had to use a rubber hammer to tap it in.
View detail
Fits: DUCATI MONSTER S2R1000, DUCATI MONSTER S2R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R testastretta
It is attractive because it can be put forward a little more than NORMAL.
The height of the brake lever is just right for the quantity.:The set was made so that the vehicle's controllability was greatly improved. View detail
Fits: DUCATI StreetFighter, DUCATI DIAVEL, DUCATI MULTISTRADA 1000, DUCATI SuperSport, DUCATI Multistrada 1100/S, DUCATI MONSTER796, DUCATI MONSTER 1200, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R, DUCATI MONSTER S2R1000, Others Inner diameter:Φ14-Φ15
Nothing fancy, but...
The Bar End I used to use was a Type that collapses and tightens the Rubber in the Handlebar.
The vibration of the TWIN will cause it to loosen.
Buy this one.
It is not flashy, but Simple design and does not loosen due to vibration.
View detail
Fits: DUCATI STREETFIGHTER, DUCATI Multistrada 1200S, DUCATI HYPERMOTARD939, APRILIA RSV4, KTM 990SUPER DUKE, KTM 990SUPER DUKE R, MOTOGUZZI MGS-01, MOTOGUZZI MGS-01 Corsa, TRIUMPH DAYTONA 675 R, DUCATI MONSTER S4R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, APRILIA RSV1000, APRILIA RSV1000R FACTORY, APRILIA RSV4, DUCATI 749, DUCATI 999, DUCATI 1098, DUCATI 1198, DUCATI 1299Panigale
Reliable Manufacturer
Lever with flashy Anodized or
And I'm not looking for a Short lever, so...
We chose a reliable product with a trustworthy Manufacturer.
No rattling at all, but it is a Bearing type, so the movement is Smooth.
View detail
Fits: DUCATI STREETFIGHTER, DUCATI Multistrada 1200S, APRILIA RSV4, TRIUMPH DAYTONA 675 R, MOTOGUZZI MGS-01, MOTOGUZZI MGS-01 Corsa, KTM 990SUPER DUKE R, KTM 990SUPER DUKE, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S4R, APRILIA RSV1000, APRILIA RSV1000R FACTORY, APRILIA RSV4, DUCATI 749, DUCATI 999, DUCATI 1098, DUCATI 1198, DUCATI 1299Panigale, DUCATI 848EVO
Trusted Lever
I'm not looking for fancy Anodized on Lever.
I chose it for its operability and product reliability.
The movement is Smooth but no rattling, and the adjustment Dial is a nice addition.
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
indescribable (esp. indescribably beautiful)
Since the Heavy Bar End was originally attached, was it somewhat reduced in feel? It is hard to say because the mileage is short. It is hard to say because the mileage is short. View detail
Fits: BMW S1000R, BMW S1000RR, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE 85, Others Screw diameter:M8
AELLA is good!
I think it's the best when it comes to accuracy!
The color is in the Bolt, but the dimensions with the Stand Hook are also Exactly.
Great job!
Not bad looking!
View detail
AELLA products are good, right?
Windproof effect is also not as bad as OEM!
What can I say, it looks cool!
A little expensive, but the right thing to do!
View detail
![Tie Down Hook Plate [Special Price Item]](https://img.webike-cdn.net/catalogue/images/74032/AE-74024_1_TS.jpg)
AELLA products are good, right?
I think it looks great after it's installed, not to mention the texture! View detail
Satisfied with Circuit
I use it in Circuit and it is awesome.
Embracing from high speeds has become very smooth.
However, you may not be able to tell on public roads.
View detail
Fits: DUCATI SCRAMBLER 800, DUCATI MONSTER 797, DUCATI MONSTER 821, DUCATI MULTISTRADA 950, DUCATI SuperSport, DUCATI MONSTER Plus, DUCATI SCRAMBLER Sixty2, DUCATI HYPERMOTARD939
Clutch is now lighter.
It is lighter than I expected. I am satisfied.
After installation, I adjusted it at the base of Lever because there was no more play, but it exceeded the adjustment range, so the Wire itself had to be adjusted.
Cost performance is not good, but it may be reasonable considering the strength and maintenance of texture.
I used to lose grip strength in my Left hand in half a day when I went touring, but after installation, I am not tired at all. I think it is a good product.
View detail
Fits: DUCATI HYPERMOTARD796, DUCATI DIAVEL, DUCATI Multistrada 620, DUCATI Multistrada 1200, DUCATI Superbike 916, DUCATI Multistrada 1100 DS, DUCATI MULTISTRADA 1000, DUCATI Monster, DUCATI Hypermotard 1000, DUCATI 999, DUCATI 749, DUCATI 748, DUCATI 1198, DUCATI SS800, DUCATI SS1000, DUCATI 900SS, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI ST4, DUCATI ST3
Best clutch release piston for old DUCATI
I am using this product on my DUCATI 996R. The clutch operation, which was heavy, has become lighter and easier. When I hold the clutch lever, it feels considerably lighter. I feel the clutch lever stroke for meet timing is farer compared to STD one, but I don't feel so much discomfort. a little longer, but I don't feel so much discomfort. I think many people feel that the clutch is basically heavy on older DUCATI models. This is recommended for such people. View detail
Fits: BMW R1250RS, BMW R1250R, BMW R1200RS, BMW R1200R
AELLA quality indeed!
[How is it used?
Touring95%、Circuit5%
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It's not difficult since it's almost assembled.
Since the Hexagon Socket has a low bolt head, I was worried about Torque tightening with a SmallSize Hexagonal Wrench, so I prepared a Torque wrench.
Screw locks were included and the instructions were clear on where to use them.
How was your experience with it?
Position 10mm ahead of OEM, Quantity 20mm above OEM:When set, the
It is easier to support my upper body and my posture is easier. I haven't tried it for long distances yet.
Also, the position of the Shift lever can be adjusted so that the Stroke is shortened according to the size of Japanese people's feet.
[Was there anything that disappointed you?
The instruction manual is a bit confusing; the parts list and assembly drawings are on separate sheets, so it is a bit cumbersome to compare and contrast them.
View detail
Fits: DUCATI Multistrada 1260, DUCATI Multistrada 1200, DUCATI Multistrada 1200
The angle of the Side Stand was too steep and difficult
I used to have to pull it out every time I got in and out of the Motorcycle, but thanks to this, it has become a large change and much easier. It is only 6mm thick, but it works great. It is a good product. View detail
Bad Quality
very bad quality. After 4 weeks the 2K clear coat fell off. Was a professional paint job. 80€ spent for nothing. At this price you expect good film and it doesn't say anywhere that it can't be painted! Every good Film can bei painted with clear coating View detail
Fits: KAWASAKI Z900RS cafe, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Effective
I was concerned about the vibration I was receiving when driving, so I bought this for a trial, but the vibration was really less than before, and it reduced arm and shoulder fatigue. View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER Limited Edition/Italia Independent, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER Sixty2, DUCATI 749R, DUCATI 749S, DUCATI 749, DUCATI 996R, DUCATI 996S, DUCATI 996SPS, DUCATI 996, DUCATI 999R, DUCATI 999S, DUCATI 999, DUCATI SCRAMBLER ICON, DUCATI SPORT1000, DUCATI SPORT1000, DUCATI GT1000, DUCATI ST2
Some Axle Shafts may float a little.
The product itself has a high quality feel, and above all, it is a PenetratingBolt with Quantity:Pair (for Left and Right) The shape of the design is designed to wrap around to the Design and Axle Nut, which connects the two, so there is enough confidence in case of an emergency.
However, because I had replaced the axle shaft with a PEO 0 points shaft (model number peo-F-D-P5), I think it is because of the difference in the inner diameter of the shaft, but I am a little disappointed that the Left Side does not fit fully and the axle nut is a little visible. (I think it is just a matter of appearance, and there is no problem in practical use.)
I think an OEMAxle Shaft would fit nicely.
View detail
Fits: KAWASAKI Z900RS cafe, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Vibration Small
There is no Instruction Manual (Lol)
The pure Normal Thread Screw is a Screw lock application type. It may be better to apply and install this product as well.
It is not so much that it eliminates vibration, but the Smartphone Holder, which used to make a rattling sound during slow acceleration under load at low speeds, is now Large. I think it is effective.
View detail