Reviews
Expectations for Small diameter
Many people think that changing Caliper will help.
Caliper piston and MASTER diameter must match.
Z900RS is about 70% with the new Crab, so it will not work unless it is replaced.
View detail
Excellent peace of mind in any situation.
[How is it used?
Was the one you received as per Image? The design is exactly as shown in the Image, compact and beautifully finished.
How was your experience with it? There are no problems with control of the braking force, and the braking force can be applied with confidence during operation while turning.
[Points to note] When installing, the compatibility with the normal parts was a bit difficult and took a bit of time.
How did it compare to other products? There was a cloud of difference from NORMAL.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Clutch becomes lighter
I installed it on New Model GSX1300R HAYABUSA.
In fact, this time we are replacing VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I chose it because of the way it looked. If that's what you enjoy, then that's fine.
Finally, after installing it and running it for a bit, it feels very good - lighter than the OEMClutch, and a little bit better at 17.5mm.
※※※※ Note ※※※※
New Model GSX1300R HAYABUSA will change the clutch master, [Hill HoldControlSystem will not be available.
The reason is that with the OEM clutch switch, if the clutch is released for a moment, the switch returns, the ECU recognizes that the car is starting, and the rear brake is released. However, with the external clutch master, the switch remains pressed until all the clutch is released, so the car is not detected as starting, the rear brake remains on, and even if the Axel is turned, the car does not move forward! This is very dangerous. I would like to see any Manufacturer solve this!
↑ It may be a little confusing, but try it yourself, it will never start!
In my case, I have turned that function off.
View detail
I'm glad I went with VRC.
I purchased this VRC when I replaced my GSX1300R HAYABUSA with a MASTER. In fact, this time, it is a replacement from VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I had to choose based on looks.
Finally, after installing it and running it for a bit, it feels very good, I feel the VRC is sufficient, I don't really need VRD or VRE except for Race.
We recommend this VRC over RCS! You will never regret it!
View detail
be extremely thorough, focusing on even the finest of details
Tank can be oriented 360 degrees to any desired angle. View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
First installed on a 2023 GSX1300R HAYABUSA!
The OEM MASTER was too big, tacky, and too hard to grip, so we replaced it with this one.
I have always used BREMBO, but the moment I saw this VRD for the first time, I was attracted by the beauty of the forging and Quantity of this product!:Pair (for Left and Right) Both were purchased.
Even though I have always been a brembo guy, I tried GALE SPEED for a while and it was surprisingly good!
Was the one you received as per Image?
The box is yucky and full of luxury.
A little more expensive than a brembo box? The feeling that the box was a bit more expensive than brembo's box was already conveyed to us before we opened it.
So the first impression is the best!
Was the installation difficult?
It was a bit complicated to install on the GSX1300R HAYABUSA.
If you want to use OEMHose as is [30MM]. I need an extended Banjo adapter. That would save me from having to buy an OEMHose. Nice savings!
How was your experience with it?
While the OEMMASTER is 19mm, we chose this 17.5mm.
The reason is that the OEM Caliper Piston is 30mm*P4, so 17.5mm is the most suitable size. 19mm is fine, but the grip is not so comfortable and hard, so 17.5mm is better. Please choose this size for your GSX1300R HAYABUSAOwner.
[Included Parts:were they on?
Stickers, Instruction Manuals, etc. I don't want to put Stickers because, frankly speaking, they are too flashy. I don't want to put Stickers because they are too flashy, to be frank.
[Was there anything that disappointed you?
Not particularly, I guess. Just expensive, from my friend's point of view, it's like lower than brembo:.... But this one is higher up!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be great if it came with a Switch.
View detail
คุณถาพยอดเยี่ยมสมเป็รของญี่ปุ่น View detail
To relocate Rear Master Coupling
[How is it used?
Used to relocate the Rear master on MainMotorcycle's XJR1300C.
MASTER is changed to NORMAL and footpeg is changed to Over's Rear Sets.
Was the one you received as per Image?
It was made just like the Image. I checked the size, etc. on the Active catalog before I bought it.
Since both ends are M6, it was not expected that the one to be co-tightened with the footpeg would need to expand the hole to M8.
Was the installation difficult?
The combination of XJR1300 and Over footpeg can be easily installed if only the holes can be extended.
For the master cup, we recommend brembo's small tank with a 15-degree angled outlet.
How was your experience with it?
The OEM has the Rear Master Coupling in the Side cover, which is very poorly maintained.
I am satisfied with the new relocation, which has considerably improved the serviceability and looks very good.
Also, the side where the Master cup is installed has an M6 tap cut off so that it can be attached to the SMART without using a nut.
[Included Parts:were they on?
I think it came with an M6 Smallest Bolt, and a simple Instruction Manual.
[Was there anything that disappointed you?
If I may say so, it would be better if the Size of the Mount part is not only M6 but also M8 with normal RANup.
Many manufacturers use M8 for Rear Sets, so I think this will make it more universal.
View detail
GALESPEED Billet4P Axial Caliper Black
Spec. change from brembo casting caliper.
GSX1300R HAYABUSAOEMThe touch is much better than the 6-pot brembo, but I have one complaint:I don't like the touch after the Caliper temperature rises.
After the lever play was heated, the invalid stroke doubled and solid touch could not be obtained.
I thought Brembo racing was the standard for step up, but I also heard that it was not that different, so I decided to go with GALE SPEED, which is the latest design.
Naturally, Brembo racing is also considered to be BenchMark, and we like the design.
I asked someone in Active for product information because I had received very little and was told that I could choose this instead of the lower-priced version of Evo La Rate, so I bought it.
Brembo caliper and DaytonaGolden Pad, but the lever touch does not change even after the Caliper temperature rises.
The standard pad seems to be inferior to DaytonaGolden, and there is no sense of bite like Golden, and it seems to work consistently with lever input, but I have the impression that there is no lack of braking power.
Upward compatible with Gale Lineup (Price doubled) The RTypePad can also be used with a pure racing pad, so it can be developed as well.
Red color inking was done by myself.
View detail
Attracted by the appearance, it was installed!
I was attracted by the look of the product as per the Title.
The vehicle model is ZEPHYR750.
I installed a black Gale MASTER to match Striker's Rear Sets, but the hose to the Reserve tank looked depressing, so I installed the said Aluminum Tank!
The area around the rear master is now refreshed and looks tighter.
However, the high price and low practicality (other than appearance) of the Aluminum Cut-out makes it a poor cosmetic choice.
View detail
Friendly to mods, tough on mechanics
[How is it used?
. at least as of August 19, 2019, and from the time of installation until October 8, 2023.
Mileage is at least 30,000 km
Mainly touring and occasional city driving circuit
Used with the same mounting bolt and location as OEM Fluid Tanks
Fluid used is active 4.0 and 5.1 (https://www.webike.net/sd/24038239/, https://www.webike.net/sd/24515708/)
Was the one you received as per Image?
As shown in the image, as shown in the Image.
Was the installation difficult?
Since the work was done with all Brake fluid removed, it was easy to remove the OEM, pull out the hose, cut it, attach it, and put the product on. The only hassle was that we had to bleed the air after that.
With the introduction of Rear Sets, we did not want to relocate the Tank, but we did not want to put the load of forcibly bending the Hose.
While other tanks have the hose outlet slanted directly down or toward the mounting bolt, this product, although slightly slanted, can be freely rotated 360 degrees for installation, allowing the hose to be installed in its OEM position with no waste and no load on the hose.
How was your experience with it?
It seemed to have the same capacity as the OEMTank, and there was no blowout when the pad was pushed back in the brake maintenance.
The Tank itself is not secured in any way other than being pinched, but it does not rotate or come off unexpectedly in any way.
I was concerned about heat in the center of the body, but no deformation or cracks have occurred yet.
The Fluid level is very difficult to check without any parts because there are parts that are sandwiched around the tank compared to a normal tank. When checking the Fluid level, it was necessary to illuminate it with the light of a Smartphone (Pixel 7 Pro) from the back. However, I don't remember checking it when it was transparent, so I don't know if it is the case with transparent Fluid.
[Included Parts:were they on?
I think I replaced the hose with a KIJIMA hose, and the hose clamp with a K-Con, but I have no record or memory of it, so I can't describe it.
[Was there anything that disappointed you?
I originally wanted a hose exit diagonally opposite to the mounting bolt. Since the wish was fulfilled, there is no need for installation.
What was unexpected was that the remaining Fluid amount was too hard to see as it was, so it would have been nice if there had been a warning note, even though it is possible to imagine to some extent.
This is the only product that allows the user to freely select the hose outlet, but the mechanism used to achieve this makes it difficult to check the remaining Fluid level.
I think this product is friendly to vehicles and modifiers, such as reducing the load on the hose. However, for those who perform maintenance (visual check of fluid level), the product is not so friendly as it requires one step of illuminating the product with a light.
View detail
Progressive Braking
Installed on my 2005 Spec III with Brembo P2 (34) rear caliper. Breaking is now progressive compared to the liner feel of the stock pump. Highly recommended to pair it with your Brembo product! View detail
Quality item, function & looks
I use this rear master on all my motorcycles, not only does it work great, it brings that finished touch to the motorcycle. View detail
A Master Cylinder that is Far and Above any other Master Cylinder on the Market
When I received this item yesterday and opened the box I was amazed at the sheer stunning good looks of the product as well as the excellent CNC machine and finishing work that went into making this master cylinder. This is a master cylinder than should be the benchmark for all others to follow. Not even the coveted Brembo master cylinder can hold a candle up to this work of art. The Japanese really know what it means to put your heart and soul into making a product that other companies can only dream of making. Of course no review would be complete if no mention was given to Webike for running one of the smoothest operations in the business. Super fast shipping and excellent transaction everytime. Keep up the good work. View detail
Cool, I like the Touch feeling.
I bought a brembo 11 pi but the screw holes were too narrow (40mm) and I couldn't install it. It looks cool and I feel that the range of Touch is wider. View detail
Great Caliper
Have these installed on the Gen2 Hayabusa, also used is the radial underslung bracket from galespeed as well, couldn't have been happier with the looks and performance. The entire set up is far lighter than the stock caliper and the breaking is really good over stock breaks. Wanted the radial set up over the axel set up and they look really nice and tidy. View detail
excellent
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install View detail
excellent
Hello everyone, this is a good product and I recommend it to everyone. This is 100% original, you can buy with confidence. also easy to install and more light View detail
Nice product
Hello everyone, this is a good product and I recommend it to everyone.titanium pin more light. This is 100% original, you can buy with confidence. also easy to install View detail
Nice oil tank
Hello everyone, this is a good product and I recommend it to everyone. Easy to install. This is 100% original, you can buy with confidence. View detail