Reviews
Cannot be installed with this product alone.
It is very light in weight. However, it requires nsr50 Late OEM Color for installation (Discontinued 52141-GT4-970) (e.g. "I'll be back") View detail
Beautiful product
Flawless, not cheap but boy you can see the craftsmanship and the value. Nice to have the bearings in the swingarm pivot and good chain adjusters. A good bit lighter than the stock swingarm too. IMO this is the best stock length swingarm for the Monkey. View detail
Top quality piece!
Great fitment, great quality, overall stunning product! Lovely swingarm that makes driving way more stable in the corners! View detail
เป็นสวิงอามที่สวยงามและลงตัวมาก View detail
Fits: HONDA MONKEY, HONDA GORILLA
Highly satisfactory!
From a certain company's thin Swing Arm until now.
Changed to GCraft.
First of all, it looks good!
The high price of this product is enough to give you a sense of ownership and satisfaction.
The installation requires a certain amount of skill since it is an undercarriage.
However, Special Tool is not required.
You can ride it, look at it, polish it, w
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Now you can drink.
Anyway, Cool.
You can polish Motorcycle, look at it and have a drink.
The installation is routinely MONKEYRose and
Level is normal if you are a person who is doing Level.
Special Tool is also not required.
Well, I am satisfied visually.
View detail
Cool
Installation is not very difficult.
It can be hard to effectively be different here.
The product is finished with the highest precision and looks the coolest anyway.
View detail
GCraft Swing Arm Triple Square
As long as you have a Jack, you can easily replace it.
It has not been driven yet, so the effect is unknown.
I think we were able to reduce weight from OEM.
I hope it will last for a long time.
View detail
สวิงอาร์มตัวนี้ชอบมาจากที่เคยลองใส่ของ takegawa เปลี่ยนใจมาลอง g craft สวยชอบมากเลยครับ กล่องใหญ่ เป็นลูกปืนด้วยตัวใส่แกนสวิงอาร์ม โอเคเลย View detail
G craft swingarm, 2023 grom
I was very pleased with the items and service from webike. The swingarm was perfect and exactly what I was expecting, fits perfectly and looks great. The shipping was fast to USA and customer service was excellent. Will definitely be ordering from these guys again very soon. View detail
Exactly in Normal style!
I didn't want to ruin the normal look, so I decided to make it 3cm long, which makes the gap between the Rear Fender and the Tire even, and I love the overall balance when viewed from the side.
As you said, the Chain Adjuster is very difficult to work with. Also, I ordered the Normal chainCover Option, but there is no gap between the 2.75JWheel and the 3JWheel, so I think it is impossible to install the Normal chainCover on a 3J or larger wheel. 。 Rear shock is 265mm OEM length and front/rear balance is fine.
View detail
92 exclusive Swing Arm
More rigid than previous products.
Arm section is also thicker than the conventional model.
Chain pull is also very easy to adjust for this MODEL only.
Please note that it is not compatible with the old MODEL. Please note that it is not compatible with the old MODEL!
View detail
Swingarm from G-Craft
* About quality and texture, This is one solid swingarm. Made from aluminium alloy with a triple square construction. The bearings at the pivot location and the intergrated chain adjusters are welcomed upgrades over the Honda OEM design. * About the feeling of use, Looks fantastic fitted to the Monkey 125. The solid construction and bearings leads to be noticably better ride through high speed conrners. * Products to buy together, The black Honda OEM chain guard looks terriable against the buffed aluminium finish so add one of the G-Craft chain covers to the order to complete the look. * Difficulty of installation, Installation of the swingarm is a big job. A maintenance lift is required to support the weight of the motorcycle from the frame, then complete disassembly of the rear end is needed before transfer parts over to the newly installed swingarm. The process was completed in 120 minutes with some difficultly. * Cost performance and comparison with other products, This Particular product is the best value of the reinforced swingarms available from G-Craft. An expensive product but when you look at what goes into the design and manufacturing, well worth it. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you want the features of better chain adjusters and better movement at the pivot but your budget does not allow to purchase a swingarm. Then add the Kitaco chain adjusters and MNNTHBX swingarm bushing kit for one third of the price of this swingarm. Use the product reviews to assist in making a decision on your purchase. View detail
Merit is everywhere.
In addition to the appearance, the Merit is that the suspension movement is less likely to be disturbed due to its high precision, the chain alignment is less likely to go out of alignment, the weight is reduced, the rigidity is increased due to the structure, and the comfort and stability of the ride is improved by extending the swing arm.
The two options on the market that can be clearly Upgrading from OEMSwing Arm are G'craft or OVER.
The two are full of Merit in terms of both dress-up and practical use, except for the price.
View detail
+10 on monkey baja
I had the +10 version on my honda monkey baja. +10 is ideal for a tuning bike, not too short and not too long. Big fan of the handsome finish! PS: i have i have pictures of all my reviews but i can't upload them. WEBIKE: I can always send them by mail View detail
+16 on my monkey baja
I mounted the +16 version on my tuning baja. Nice finish but I give 4 stars because of the higher price. I can't upload a picture but I can deliver them by mail, also for my other reviews WEBIKE View detail
I put it on.
I ordered it and received it in about 3 weeks. It was a part I wanted to put on by greed. lol
The one you received is still beautiful.
I used the car's pant jack to float the body, but it was a little dangerous... sweat.
I'm very happy with the way it looks on me.
I'm looking forward to seeing how much the straight line stability has changed because I'm mainly touring.
I've got 6 more miles to go, but with the shocks and all, when I put the stand up. I sleep more than before.
Not enough to knock me over.
With an extension of 10, I'd definitely change the stand.
View detail
Out of stock.
Chain slider was not attached.
It was too much trouble to return it, so I made it myself and installed it.
I shouldn't have bought it. It sucks.
View detail
Oh no! Overpriced texture.
Got it today! I haven't installed it yet.
Great texture! I was concerned it wouldn't be there before I bought it.
There was a Chain slider underside!
At first I thought it was only the upper side, but the lower side is also a long Slider
There it is! Looking forward to installing it... ♪
GCraft has a shorter RearAXIS Shaft than OEM Length.
So you can't install the external OEM LengthAXISルスShaft.
View detail
Wow that's cool
The product is a reliable Graft, the accuracy and material selection are both good products.
The welding is reasonably good, and as far as accuracy goes, it's perfect.
Above all, the NORMAL is very heavy, so it's worth replacing it just for that.
The dress-up effect is high and it is a good product, but the welding part of the different materials is welded after buffing, and the buffing is sweet, so I gave it a minus star for the quality.
It's a shame because the rest of the product is built to Well.
View detail