Reviews
It is considerably less expensive than OEM but functions well.
O-ring for Generator of CUB series.
It is cheaper for Large than buying OEM. At least as of this writing in May 2024, OEM costs about $340. OEM is getting expensive….
It is just an oil-resistant O-ring, but surprisingly, there is no general standard product, so we have to rely on OEM or compatible products.
I'm basically a reuser of O-rings here. Bought just in case at OH." But after a while after OH, it started leaking and I had to use it. This kind of leakage is scary because it comes out of nowhere even though it looks fine.
After replacing it with this product, it is functioning without any leakage at all.
It is just an O-ring, so there is nothing special to say, but be careful not to twist it when installing it. If it twists, it will break and leak.
An old ring is hardened and oil is absorbed, so it is difficult to twist even if it is attached properly, but a new ring will twist.
Once oiled and installed, the twisting can be fixed by inserting a thin, non-sharp stick such as GlassesDriver between the groove and the Ring and turning it around.
Anyway, it is better available and less expensive than OEM, so if you have an old CUB-type Engine, I recommend you to buy it while shopping on webike.
View detail
No Color, comparable to OEM Product.
After a while after engine OH, oil seal on Generator side and seal on StatorMount started leaking, so I replaced them.
The OEM oil seals that started leaking have only been used for 6 years and 10,000 km since the last OH, and I've treated them with care, but it happens.
The thing itself could be installed without any problems and the leakage was contained.
At the time of purchase, it was much cheaper than OEM, not to mention cheaper than buying a UniversalOil seal, so I was worried.
Not only for OH, but also for normal use, the leakage will suddenly appear one day, and since it is easy to replace, we recommend Stock as a precaution.
View detail
Fits: KAWASAKI ZZ-R1100 (ZXT10D ), KAWASAKI ZZ-R1100 (ZXT10C ), KAWASAKI Zephyr 1100 RS (ZRT10A ), KAWASAKI Zephyr 1100 (ZRT10A ), KAWASAKI GPZ900 R Ninja FNo.ZX900A-056001-, KAWASAKI GPZ1100 (ZXT10E all models)
easygoing
The parts needed for Filter replacement are available, so you don't have to search for part numbers. View detail
The knock pin are a part that do tend to sustain damage and is advisable to replace when this the case
About quality and texture - The pair of knock pins from K-Pit are made from steel and raw surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The knock pin is a part that do tend to sustain damage and is advisable to replace when this the case. This will ensure easier installation and removal of parts like the cylinder head, cylinder and crankcase halves when it comes time to overhauling the engine, as this is where they are used on the Honda Grom. Products to buy together - Key products to purchase when overhauling the engine would be gaskets and O-rings, all which are available from K-Pit here on Webike for the Honda Grom. Difficulty of installation - The installation of the knock pin is an simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to clean the mating surface and press the knock pin into place. Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the knock pin is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the knock pin, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: KAWASAKI Eliminator 400LX, KAWASAKI ZRX1100, KAWASAKI ZR-7, KAWASAKI ZR-7-S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100-II, KAWASAKI ZZ-R250, KAWASAKI ZZ-R1200, KAWASAKI ZRX1200S, KAWASAKI Z400FX, KAWASAKI GPZ400R, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400SE, KAWASAKI Eliminator 400, KAWASAKI GPX750R, KAWASAKI GPX250R-II, KAWASAKI FX400R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750-RS
all in one
O-ring, Packing also Quantity:Since it comes in a set, it is an excellent product that allows immediate replacement of elements as long as you have the oil.
It may not be necessary for some people, but I think it is a very useful product for beginners.
View detail
Fits: HONDA GORILLA 6V FNo. Z50J-1300017-1805927, HONDA MONKEY 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927
K-PIT K-Pit Ignition coil
The KITACO Ignition coil is made by K-PIT, so it is easy to install as long as you read the instruction manual carefully. View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI D-TRACKER, KAWASAKI D-TRACKERX, KAWASAKI KLX250
normally
Rubber packing is also available in Quantity:Set helped me a lot, and if it's pleasantly cheap, Cost is also ??5 View detail
Fits: HONDA CB250F MC43 all models, HONDA CBR250R MC41 All models, HONDA CRF250 L MD38 All models, HONDA CRF250 M MD38 All models
Purchased for PowerBox installation
Purchased for PowerBox installation.
One piece is all that is needed.
I had a hard time removing the old Gasket.
The new one, after applying liquid Gasket.
If it is attached, it will not come off.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125S
Used on Gixxer150 (NG4BG type), no problems
Used for Gixxer 150 (NG4BG type).
All the necessary parts for the Oil Filter are included, and all you need is a tool to complete the job. (Also comes with a Drain Washer)
View detail
Fits: HONDA GORILLA 6V FNo. Z50J-1300017-1805927, HONDA MONKEY 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927
K-PIT K-Pit Ignition coil (B)
I purchased and installed this K-PIT for maintenance of my 6V GORILLA. After installation, I checked the ignition of the plug and it sparked perfectly. The original OEM Ignition coil was over 40 years old, so I was worried about its deterioration over time, but this time I bought it and installed it. View detail
Fits: HONDA Grom (MSX125), HONDA APE, HONDA DREAM50, HONDA MONKEY, HONDA GORILLA
Compatible with KITACO clutch covers.
It has been about 6 months since I replaced the clutch cover with a KITACO clutch cover. After two oil changes during that time, the oil filter was finally replaced.
The work itself is easy, but it is good to protect the filter with dustcloth or something similar because the oil drips quite a bit when the filter is removed.
The removed Filter was quite dirty.
I wish I had replaced it a little earlier.
So, we will continue to confirm Repeat in the future.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Exhaust Gasket
It can be used without any problem in Material and Size. View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY125, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA glom, HONDA DAX125, HONDA SUPER CUBC125
I'm getting a little worse for wear.
Rubber will wear out and should be replaced regularly. View detail
It was Bolt On.
YamahaRD90 (6V Point plastic mag ignition) The OEM was discontinued, so it was really helpful. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1 S, YAMAHA YZF-R1 S, YAMAHA YZF-R1 S, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZS1000 FAZER S, YAMAHA FZS1000 FAZER S, YAMAHA FZS1000 FAZER S, YAMAHA FZ1S FAZER, YAMAHA FZ1S FAZER, YAMAHA FZS1000 FAZER
Lever is consumable
OEM is more expensive. Of course, you want to do Gymkhana, right? K-PIT is available at most motorcycle supply stores. K-PIT is available at most motorcycle supply stores, so it is faster than buying OEM Product at a shop or online. Levers are consumables. I would replace the cheapest consumables with the same quality as the OEM Product.
Actually, the motorcycle to be used is VT250 SPADA, but due to the Mirror Holder, the clutch holder is for FZ-1 (Non-cowl). The clutch holder for FZ-1 (non-cowl) has a Mirror Holder. So, I use it for VT250 SPADA, but I choose lever for Yamaha and for FZ-1 (non-cowl). Sometimes, I am wrong in my prediction and end up wasting the parts even if I buy them (laugh).
Note that brembo's Mechanical Clutch Lever is also at the top of this Lever's upward compatibility list.
View detail
Fits: HONDA HRC Grom (GROM5), HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Stable and easy to use.
I use it every time I change Oil.
Filter, Packing, etc. is Quantity.:It's a Set.
You won't get lost.
The price is also good.
View detail
Fits: SUZUKI ADDRESS110 CF11A, SUZUKI ADDRESS V100 CE11A, SUZUKI ADDRESS V100 CE13A, SUZUKI STREET MAGIC 110 II TR110S CF12A, SUZUKI STREET MAGIC 110 II TR110SD CF12A, SUZUKI STREET MAGIC 110 TR110S CF12A, SUZUKI STREET MAGIC 110 TR110SD CF12A
Exhaust gasket identical to the original
About quality and texture The exhaust ring-gasket is of the highest quality, made completely identical to the original, the same texture, dimensions and materials, however, a little cheaper and from a trusted consumables company About the feeling of use Excellent compatibility with the original cylinder, which once again proves the high quality, the ring is strong and at the same time soft, which allows you to achieve a perfect fit of the two flanges and the best possible seal to prevent exhaust gases from breaking past the muffler. After installing this ring, there is not a single drop of oil leaks on the exhaust flange of the cylinder, as well as any fogging Products to buy together An independent product, no additional purchases required Difficulty of installation Easy installation to replace the old O-ring, fits perfectly into place, does not fall out, but is not difficult to install, perfect fit Cost performance and comparison with other products Low cost, high quality, one of best replacements for the original on the market About shipping and packaging Packaged in a simple small package, no damage in delivery, very compact product Any concerns, cautions, or advice when purchasing Just make sure the product is fully compatible with your vehicle View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4 Palette 8 Format:UZ50FSK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 8 Format:UZ50FK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 7 Format:UZ50FK7 Frame number:CA41A-185064, SUZUKI LETS4 Palette 11-12 Format:UZ50FL1-2 Frame number:CA45A-191567-, SUZUKI LETS4 Basket 7 Format:UZ50BK7 Frame number:CA43A-100050-, SUZUKI LETS4 Basket 12 Format:UZ50BL2 Frame number:CA43A-129374-, SUZUKI LETS4 Basket 10 Format:UZ50BL0 Frame number:CA43A-121127-122636, SUZUKI LETS4 G 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 G 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 G 08-09 Format:UZ50K8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50GK8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50DK9 Frame number:CA45A-100001-, SUZUKI LETS4 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 11-12 Format:UZ50DL1-2 Frame number:CA45A-191327-
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4 Palette 8 Format:UZ50FSK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 8 Format:UZ50FK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 7 Format:UZ50FK7 Frame number:CA41A-185064, SUZUKI LETS4 Palette 11-12 Format:UZ50FL1-2 Frame number:CA45A-191567-, SUZUKI LETS4 Basket 7 Format:UZ50BK7 Frame number:CA43A-100050-, SUZUKI LETS4 Basket 12 Format:UZ50BL2 Frame number:CA43A-129374-, SUZUKI LETS4 Basket 10 Format:UZ50BL0 Frame number:CA43A-121127-122636, SUZUKI LETS4 G 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 G 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 G 08-09 Format:UZ50K8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50GK8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50DK9 Frame number:CA45A-100001-, SUZUKI LETS4 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 11-12 Format:UZ50DL1-2 Frame number:CA45A-191327-
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail