Reviews
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1 S, YAMAHA YZF-R1 S, YAMAHA YZF-R1 S, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZS1000 FAZER S, YAMAHA FZS1000 FAZER S, YAMAHA FZS1000 FAZER S, YAMAHA FZ1S FAZER, YAMAHA FZ1S FAZER, YAMAHA FZS1000 FAZER
Lever is consumable
OEM is more expensive. Of course, you want to do Gymkhana, right? K-PIT is available at most motorcycle supply stores. K-PIT is available at most motorcycle supply stores, so it is faster than buying OEM Product at a shop or online. Levers are consumables. I would replace the cheapest consumables with the same quality as the OEM Product.
Actually, the motorcycle to be used is VT250 SPADA, but due to the Mirror Holder, the clutch holder is for FZ-1 (Non-cowl). The clutch holder for FZ-1 (non-cowl) has a Mirror Holder. So, I use it for VT250 SPADA, but I choose lever for Yamaha and for FZ-1 (non-cowl). Sometimes, I am wrong in my prediction and end up wasting the parts even if I buy them (laugh).
Note that brembo's Mechanical Clutch Lever is also at the top of this Lever's upward compatibility list.
View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4 Palette 8 Format:UZ50FSK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 8 Format:UZ50FK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 7 Format:UZ50FK7 Frame number:CA41A-185064, SUZUKI LETS4 Palette 11-12 Format:UZ50FL1-2 Frame number:CA45A-191567-, SUZUKI LETS4 Basket 7 Format:UZ50BK7 Frame number:CA43A-100050-, SUZUKI LETS4 Basket 12 Format:UZ50BL2 Frame number:CA43A-129374-, SUZUKI LETS4 Basket 10 Format:UZ50BL0 Frame number:CA43A-121127-122636, SUZUKI LETS4 G 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 G 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 G 08-09 Format:UZ50K8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50GK8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50DK9 Frame number:CA45A-100001-, SUZUKI LETS4 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 11-12 Format:UZ50DL1-2 Frame number:CA45A-191327-
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4 Palette 8 Format:UZ50FSK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 8 Format:UZ50FK8 Frame number:CA45A-100061-, SUZUKI LETS4 Palette 7 Format:UZ50FK7 Frame number:CA41A-185064, SUZUKI LETS4 Palette 11-12 Format:UZ50FL1-2 Frame number:CA45A-191567-, SUZUKI LETS4 Basket 7 Format:UZ50BK7 Frame number:CA43A-100050-, SUZUKI LETS4 Basket 12 Format:UZ50BL2 Frame number:CA43A-129374-, SUZUKI LETS4 Basket 10 Format:UZ50BL0 Frame number:CA43A-121127-122636, SUZUKI LETS4 G 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 G 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 G 08-09 Format:UZ50K8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50GK8 Frame number:CA45A-100001-, SUZUKI LETS4 G 08-09 Format:UZ50DK9 Frame number:CA45A-100001-, SUZUKI LETS4 7 Format:UZ50K7 Frame number:CA41A-185041-, SUZUKI LETS4 7 Format:UZ50GK7 Frame number:CA41A-185041-, SUZUKI LETS4 11-12 Format:UZ50DL1-2 Frame number:CA45A-191327-
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Fits: YAMAHA MT-07, YAMAHA MT-07A, YAMAHA XSR700, YAMAHA MT-09SP, YAMAHA XSR900, YAMAHA YZF-R1M
Cost-effective, OEM-compatible parts can be custom-made at a lower cost!
[How is it used?
I bought it because I wanted to match the color with Brake lever.
Was the one you received as per Image?
Almost exactly as shown in the Image, which I believe is OEM compatible.
Was the installation difficult?
There is nothing particularly difficult, but since adjustment of the clutch wire is required, it is recommended that someone with knowledge and skills perform the work, referring to the service manual.
How was your experience with it?
Since it is OEM compatible, it can be used without problems.
[Included Parts:were they on?
There was not.
If necessary, a Spacer SIMM must be added when installing the clutch lever, which must be purchased separately.
[Was there anything that disappointed you?
OEM compatibility and texture should be considered reasonable in light of Cost performance.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have inquired about it on Webike and received an answer, so if it is helpful, I think it is a good idea to read it carefully and ask questions before purchasing.
Confirmation = Questions
■Product URL : https://www.webike.net/sd/25717631/
■Product name:Brake lever
Item No.:70-525-64260
■Sales Price (tax included) :
■ Notes:[Type] Left Side Lever/YL-26 [Color] Black Compatible OEM Product No. B90-83912-00 [Specification] Compatible Spacer SIMM Size (For wobble adjustment) :Φ10.5×17.0×0.3
There is a case that there is a spec. change of the commodity by the convenience of the manufacturer. Please acknowledge it.
■■Confirmation
The notation is Brake, but I think it is Clutch lever. I found it in YL-26 without any search.
Type] Left SideLever/YL-26
Color] Black
Compatible OEM Product No.] B90-83912-00
Item number:70-525-64260
I plan to purchase at my own risk, but I want Black,
We believe it can be used if it has the same shape and dimensions as SilverYL-05 in a different color.
To be sure, we would appreciate it if you could contact the manufacturer to see if it can be installed.
Thank you for your cooperation.
Reply from Webike
We have checked with our suppliers regarding conformity,
The compatibility of the product is unknown because it has not been confirmed by Manufacturer.
For alternative products, please contact us. YAMAHA FZ1FAZER 2007 I can't give you a clear answer just by
YL-05... (OEM Product No.:4XV-83912-11) is considered close.
(The compatibility chart shows FZ1-S (reimported), so it is not certain.)
Please be sure to check the YamahaOEM Product No. based on your vehicle information and check the attached compatibility chart.
View detail
Fits: YAMAHA Bronco., YAMAHA Tricker (XG250) Model: 5XT1-B, YAMAHA Tricker (XG250) Model: 5XT1-A, YAMAHA Tricker (XG250) Model: 5XT1-9, YAMAHA CELLO 250 S Model: 3C56|C|M|Y|S Frame Number: DG17J, YAMAHA CELLO 250 Model: 1YBL Frame number: DG17J, YAMAHA CELLO 250 Model: 1YBF Frame number: DG17J, YAMAHA CELLO 250 Model: 1YB9 Frame number: DG17J, YAMAHA CELLO 250 Model: 3C56|C|M|Y|S Frame Number: DG17J, YAMAHA CELLO 250 Model: 3C51-7 Frame number: DG11J, YAMAHA CELLO 250 Model: 3C51-5 Frame number: DG11J, YAMAHA CELLO 225 Model: 4JG1-6 Frame number: 4JG, YAMAHA CELLO 225 Model: 3RW5 Frame number: 4JG, YAMAHA CELLO 225 Model: 5MP1-4 Frame number: DG08J, YAMAHA WR250 X Model: 3D75-9|A|B|C|D|E Frame Number: DG15J, YAMAHA WR250 X Model: 3D71-4 Frame number: DG15J, YAMAHA WR250 R Model: 3D75-9|A|B|C|D|E Frame Number: DG15J, YAMAHA WR250 R Model: 3D71-4 Frame number: DG15J, YAMAHA TZR50, YAMAHA TY250Z Scottish
K-pit Clucth Lever Fantastic
This K-PIT clutch lever look awesome, same as OEM one made by KITACO.Product price is so cheap than the Genuine OEM but the Quality is the same .I'm going to install this new clutch lever on my 1987 TW200.Slide back the rubber clutch cover first then I have to remove the clutch cable from the older clucth lever.Adjust the clutch cable for maximum free play.loosen the knurled lock nut and turn the adjuster in as far as it will go while aligning the slot in the adjuster and lock nut with the slot in the clutch lever perch.pull in the clutch lever with one hand while pulling on the clutch cable with the other.quickly release the lever and pull the cable out of the adjuster and remove it from the lever..Now I used crescent wrench to hold of the bolt on the top then use the 10mm ratchet to loosen the nut on the bottom & removed the bolt and the nut from the clutch lever. removed the older clutch lever , place a new K-PIT CLUCTH LEVER and tighten the bolt and the nut .insert the end of the clutch cable into the new K-PIT LEVER and guide through the slot in the perch,lock nut and adjuster .pull the clutch cable in and pop the cable housing into the adjuster as the lever released.Adjust the clutch cable free play to specification..took 10 to 15 minutes to get the job done. The package arrived on time and very neatly packed.Thanks for the high quality packaging.I have been purchasing parts for a long time from the WEBIKE SHOP AND NEVER HAD A PROBLEM .WEBIKE PROVIDED A GOOD SERVICE AND SMOOTH TRANSACTION.NO WORRIES .I'm a Happy Customer.WEBIKE Shop way beyond 5star. Thank You So Much!! View detail
Fits: HONDA XR230 MD36, HONDA SL230 MD33, HONDA FTR223 MC34, HONDA CB223 S MC40, HONDA XR230 MD36, HONDA SL230 MD33, HONDA FTR223 MC34, HONDA CB223 S MC40
Clutch lever is folded, you can't leave…
[How is it used?
I bought it because I own an XR230 and an XR250 and had the opportunity to compete in the Enduro race on my XR230.
If the clutch breaks, everything is ruined, not only in the race, but also in the touring and street riding, and the worst is the miserable form of Wrecker. "The Amulet." I bought it as a
How was your experience with it?
In the Enduro race, thanks to the good luck charm, I did not break.
As you can see in the image, it is almost the same as the OEM Product, except the Wire leads are slightly different.
If it is a machine of the HONDA system, most, it is likely to fit, but I recommend confirmation without fail.
In particular, it is not ShortLabor, but OEM compatible, so it is nice to be able to Replace as it is.
How did it compare to other products?
I bought the Brake Side from DRC, and it is also the same as the OEM Product.
The rest, I think, depends on the stock. Even if it breaks suddenly and runs into a mass merchandiser, it is only sad if it is not in stock, so you can keep it in your bag as a spare.
[Points to note]
We recommend that you always check the compatibility.
View detail
I bought it because I fell and bent it.
I've had a few mishaps in the past, but this time I'm going all out.
I fell, so for the first time ever, Lever.
high-handed (Lol)
It doesn't interfere with operation, but it's not very shabby.
Newly purchased, I did a lot of research but only on this Site.
I didn't sell it.
It's OEM, so you know how it feels. (Lol)
There's a pretty good chance you'll scrape or break it when you fall.
It is a part that can be bent, so you can have it as a spare.
I think it's good
View detail
Fits: HONDA Magna (V-Twin Magna) Model: VT250C7 Frame Number: MC29-1520001-, HONDA Magna (V-Twin Magna) Model: VT250C5 Frame Number: MC29-1520001-, HONDA Magna (V-Twin Magna) Model: VT250C3 Frame Number: MC29-1520001-, HONDA Steed 600 VSE Model: NV600CJ|CK|CL|CN|CP|CR|CT Frame Number: PC21-1000001-, HONDA Steed 600 VLX Model: NV600CJ|CK|CL|CN|CP|CR|CT Frame number: PC21-1000001-, HONDA Steed 600 Model: NV600CJ|CK|CL|CN|CP|CR|CT Frame Number: PC21-1000001-, HONDA Steed 400 VSE Model: NV400CJ|CK|CL|CN|CP|CR|CVS|CVT|CT|CBW|CB1|CMT Frame number: NC26-1000001-, HONDA Steed 400 VLX Model: NV400CJ|CK|CL|CN|CP|CR|CVS|CVT|CT|CBW|CB1|CMT Frame number: NC26-1000001-, HONDA Steed 400 VCL Model: NV400CJ|CK|CL|CN|CP|CR|CVS|CVT|CT|CBW|CB1|CMT Frame number: NC26-1000001-, HONDA Steed 400 Model: NV400CJ|CK|CL|CN|CP|CR|CVS|CVT|CT|CBW|CB1|CMT Frame number: NC26-1000001-, HONDA Shadow Slasher 750, HONDA Shadow Classic 400, HONDA VTR250 Type-LD Model: VTR250W|W-2|Y|3|5|7|9|B|D|FD|LF Frame Number: MC33-1000001-, HONDA VTR250 F Model: VTR250W|W-2|Y|3|5|7|9|B|D|FD|LF Frame Number: MC33-1000001-, HONDA VTR250 Model: VTR250W|W-2|Y|3|5|7|9|B|D|FD|LF Frame Number: MC33-1000001-, HONDA GB250 Clubman Model: GB250L|P|S|V|2 Frame Number: MC10-1300001-1799999, HONDA CB400 SS Special Edition Model: CB400SS2|4|6|7|8 Frame Number: NC41-1000001-, HONDA CB400 SS Model: CB400SS2|4|6|7|8 Frame number: NC41-1000001-, HONDA Shadow 400, HONDA Magna 750 94-95 Type: VF750CS Frame number: RC43-1000001-
Same as OEM Product etc.
I was able to replace it with VTR-F without any problem.
The color is slightly different from the OEM ProductClutch, but it is not a problem.
View detail
Fits: HONDA XR250 Motard MD30-15000001-, HONDA XR250 Baja MD30-15000001-, HONDA xr250 md30-15000001-, HONDA FTR223 MC34, HONDA CRM250 R MD24-1300001-, HONDA CRM250 AR MD32, HONDA CB223 S MC40, HONDA XR250 Motard MD30-15000001-, HONDA XR250 Baja MD30-15000001-, HONDA xr250 md30-15000001-, HONDA FTR223 MC34, HONDA CRM250 R MD24-1300001-, HONDA CRM250 AR MD32, HONDA CB223 S MC40
I have to have a backup.
[How is it used?
This time I had to replace the Lever because it was bent spectacularly from standing on it!
Was the one you received as per Image?
Just like the image!
Was the installation difficult?
It was my first Lever exchange and I was taught how to do it!
How was your experience with it?
No particular change from the old one, and it's working without a hitch!
[Included Parts:were they on?
Not particularly.
[Was there anything that disappointed you?
There wasn't!
View detail
Fits: HONDA READ 125 Model: NHX125D-F Frame number: JF45-1000001-, HONDA Dio 110 Model: NSC110WHB Frame number: JF31-1000001-, HONDA Sh Mode 14 Model: ANC125E Frame number: JF51-1000001-, HONDA Sh Mode 14 Model: ANC125E Frame number: JF51-1000001-
As OEMLever's for Replacement
Purchased as an OEMLever for Replacement.
The OEMLever had a squeaky feeling after maintenance, so I replaced the PivotBolt with a new one as well.
After the exchange, the fee ring is better and I feel good.
The quality and shape of the product is the same as the OEM product.
View detail
Fits: HONDA XR250 Motard MD30-15000001-, HONDA XR250 Baja MD30-15000001-, HONDA xr250 md30-15000001-, HONDA FTR223 MC34, HONDA CRM250 R MD24-1300001-, HONDA CRM250 AR MD32, HONDA CB223 S MC40, HONDA XR250 Motard MD30-15000001-, HONDA XR250 Baja MD30-15000001-, HONDA xr250 md30-15000001-, HONDA FTR223 MC34, HONDA CRM250 R MD24-1300001-, HONDA CRM250 AR MD32, HONDA CB223 S MC40
good product
A long time ago, the lever broke while slipping while riding. I bought it instead of the genuine product and installed it. The size and design fit perfectly and I was quite satisfied with the price. If you can afford it, it will be helpful for accidents or slips in the future Long time ago, the lever was broken while slipping while riding I bought it instead of the genuine article and attached it, but the size and design It was a good fit and was quite satisfactory for the price. If you can afford it, if you have one lever at a time, I think it will help slip translated by Google Translator View detail
Fits: HONDA CL400 98 Format:CL400W Frame number:NC38-1000001-, HONDA CBR250 R Special edition Format:CBR250RF Frame number:MC41-1400001-, HONDA GB250 GB250 CLUBMAN Format:GB250L|P|S|V|2 Frame number:MC10-1300001-1799999, HONDA NC700 S Format:NC700SC|SD|SAC|SAD|DC|SDD Frame number:RC61-1000001-, HONDA GB250 GB250 CLUBMAN Format:GB250L|P|S|V|2 Frame number:MC10-1300001-1799999, HONDA NC700 S ABS Format:NC700SC|SD|SAC|SAD|DC|SDD Frame number:RC61-1000001-, HONDA NC700 X Format:NC700XC|XLC|XD|XLD|XDC|XDLC|XDD|XDLD|XAC|XALC|XAD|XALD Frame number:RC63-1000001-, HONDA NC700 X ABS Format:NC700XC|XLC|XD|XLD|XDC|XDLC|XDD|XDLD|XAC|XALC|XAD|XALD Frame number:RC63-1000001-, HONDA NSR250 R 94-96 Format:NSR250RR|2R|3R|3R|3S|2T|3T Frame number:MC28-1000001-, HONDA NSR250 R 90-92 Format:NSR250R7L|7N|8L|8N|9L|9N Frame number:MC21-1000001-, HONDA NC700 X Type LD Format:NC700XC|XLC|XD|XLD|XDC|XDLC|XDD|XDLD|XAC|XALC|XAD|XALD Frame number:RC63-1000001-, HONDA NSR250 R SE 90-92 Format:NSR250R7L|7N|8L|8N|9L|9N Frame number:MC21-1000001-, HONDA NSR250 R SP 90-92 Format:NSR250R7L|7N|8L|8N|9L|9N Frame number:MC21-1000001-, HONDA NSR250 R SE 94-96 Format:NSR250RR|2R|3R|3R|3S|2T|3T Frame number:MC28-1000001-, HONDA NSR250R, HONDA NSR250 R SP 94-96 Format:NSR250RR|2R|3R|3R|3S|2T|3T Frame number:MC28-1000001-, HONDA NSR250R, HONDA VTR250 Format:VTR250W|W-2|Y|3|3|5|7|7|9|B|D|FD|LF Frame number:MC33-1000001-, HONDA VTR250 F Format:VTR250W|W-2|Y|3|3|5|7|7|9|B|D|FD|LF Frame number:MC33-1000001-, HONDA Grom Model Number:MSX125D Frame number:JC61-1000001-
Slightly thicker than OEM?
This is the OEM-compatible series of KITACO, but the points you can accumulate are higher than those of OEM It's cheap
Fitting is not different from OEM and is perfect, but Lever is a little thicker than OEM In fact, this is probably better because it's less tiring and stronger for your hands
If you're not unhappy with the OEM, this should be enough for you
View detail
Fits: HONDA CL400 98 Format:CL400W Frame number:NC38-1000001-, HONDA CBR250 R Special edition Format:CBR250RF Frame number:MC41-1400001-, HONDA GB250 GB250 CLUBMAN Format:GB250L|P|S|V|2 Frame number:MC10-1300001-1799999, HONDA NC700 S Format:NC700SC|SD|SAC|SAD|DC|SDD Frame number:RC61-1000001-, HONDA GB250 GB250 CLUBMAN Format:GB250L|P|S|V|2 Frame number:MC10-1300001-1799999, HONDA NC700 S ABS Format:NC700SC|SD|SAC|SAD|DC|SDD Frame number:RC61-1000001-, HONDA NC700 X Format:NC700XC|XLC|XD|XLD|XDC|XDLC|XDD|XDLD|XAC|XALC|XAD|XALD Frame number:RC63-1000001-, HONDA NC700 X ABS Format:NC700XC|XLC|XD|XLD|XDC|XDLC|XDD|XDLD|XAC|XALC|XAD|XALD Frame number:RC63-1000001-, HONDA NSR250 R 94-96 Format:NSR250RR|2R|3R|3R|3S|2T|3T Frame number:MC28-1000001-, HONDA NSR250 R 90-92 Format:NSR250R7L|7N|8L|8N|9L|9N Frame number:MC21-1000001-, HONDA NC700 X Type LD Format:NC700XC|XLC|XD|XLD|XDC|XDLC|XDD|XDLD|XAC|XALC|XAD|XALD Frame number:RC63-1000001-, HONDA NSR250 R SE 90-92 Format:NSR250R7L|7N|8L|8N|9L|9N Frame number:MC21-1000001-, HONDA NSR250 R SP 90-92 Format:NSR250R7L|7N|8L|8N|9L|9N Frame number:MC21-1000001-, HONDA NSR250 R SE 94-96 Format:NSR250RR|2R|3R|3R|3S|2T|3T Frame number:MC28-1000001-, HONDA NSR250R, HONDA NSR250 R SP 94-96 Format:NSR250RR|2R|3R|3R|3S|2T|3T Frame number:MC28-1000001-, HONDA NSR250R, HONDA VTR250 Format:VTR250W|W-2|Y|3|3|5|7|7|9|B|D|FD|LF Frame number:MC33-1000001-, HONDA VTR250 F Format:VTR250W|W-2|Y|3|3|5|7|7|9|B|D|FD|LF Frame number:MC33-1000001-, HONDA Grom Model Number:MSX125D Frame number:JC61-1000001-
I think that it is a cheap and good product.
I did not break when I fell down, but since I got a big scratch on the Edge section I decided to exchange it. It was slightly different in shape from Grom's OEMParts, but it was not as worrisome. There are manuals made by KITACO, I think that there is no loss even if carrying this as a spare for Touring with satisfactory parts at this price. View detail