Reviews
Stable performance and appearance
Stable quality and appearance. I don't need to change it because the latest liter machines are NORMAL and mesh, but I am happy to see that SmallEngine Displacement Volume improves the look and still Touch significantly. View detail
Touch improved
Touch was getting worse over time, which was good. View detail
Fits: HONDA FTR223, HONDA FTR223
Touch improvement.
Since it is an old motorcycle, we replaced the Master Cylinder overhaul, Caliper overhaul, and pad, and also replaced the hose with a mesh one at the same time. Now I can ride with peace of mind. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Cospar good
Cost-effective, even fitting is included!
I'm not a fan of fancy mesh hose. [Color] I chose Smoke×Plating and it looks good.
I think the performance is fine for sports touring.
View detail
I like having a choice of lengths.
I use them all the time because of their price and ease of use.
It's nice to be able to choose the length, and it's inexpensive.
Brake Brembo conversion Used for ABS removal
I purchased 885mm this time, but I think it could have been a little shorter depending on how you handle it.
But this is the length of the caliper straight from the radipon.
The tightness must be gentle or it will cause scratches.
Careful
View detail
Fits: KAWASAKI D Tracker 125
Even though the car model Bolt On.
I bought it because it is Bolt On for my car model.
Caliper's Screw is covered by Caliper's Screw.
I can't remove the Caliper Adapter.
I think Straight is a good choice.
View detail
Different products
I selected t2Type and received the wrong item. I emailed the contact and got no response. I don't know how to return it.
What is going on?
View detail
ACPerformanceFront Brake Hose Kit
I chose this product because I wanted to improve the appearance and brake performance of the front area! I also changed the handlebar, so I chose a length that took that into account. The appearance has changed enough, but I don't think the brake performance has changed that much because I am an amateur. (^^) Maybe those who understand it can feel it? View detail
ACPerformance lineRear Brake Hose Kit
I bought this product because I wanted to change the appearance of the suspension and improve the effectiveness of the brake. As I expected, the appearance of the parenthesis improved considerably, but I did not feel that the brake effect had changed by a large amount, since I am an amateur! View detail
If Handlebar and Riser are both NORMAL high, this is the one to choose.
The RedBlueSilverHose that was popular a long time ago was attached, but was replaced because it started leaking from the Crimp.
The clutch sides are now unified with the same material and feel good.
Length batch.
It is a life-threatening component, so if you cannot do it yourself, you should take it to the Shop.
View detail
Maybe a little longer.
The length is so long that it is kind of unsettling. I feel like it could be 5 cm longer. View detail
Fits: HONDA NSR80, HONDA NSR80, HONDA NSR50, HONDA NSR50
I just need to install it for now.
NSR50 is now assembled from the frame. I have a 40mm long swing arm, but I think I can use the OEM length kit. But I don't know if it is the same for the handling. All installation is done by Quantity:I have not used it yet, so I don't know if it is controllable or not, but I have used this series on other cars, so it should be fine. View detail
BlackGold color.
Hose was also replaced while the Release was replaced.
If you want to unify the handlebar area with black color, this is the only choice for you.
Nowadays, there are cheap Chinese Hoses that are similar, but the way they are made is completely different and I am 100% satisfied.
Don't forget Fluid when you replace it. dot4 bought it.
View detail
Installation is Large
It took a total of 5 hours and I would not recommend a beginner to operate it on their own, the BoltDesign on the Caliper side was poor and very difficult to tighten, there was no obvious change in the feel of the Brake, the only difference was that the Brake was very tight, the Caliper side was very tight and the Caliper side was very tight. View detail
Fits: APRILIA RS250 (Aprilia)
BrakeTouch drastically changed, for Stainless MeshFR
I had a hard time with the OEM rubber hose, because the clearance between the banjo bolt of the Master Cylinder and the Fork was too narrow, and I had a hard time with the hose routing etc. The OEM brembo horizontal MASTER might not have been so difficult. I had to cut the handlebar right and left many times to check the interference and tensioning. No Fluid leakage and no problem. View detail
Fits: APRILIA RS250 (Aprilia)
RR side doesn't show much difference in fee rings, but aligns with FR.
One of the troublesome parts of the RS250 is the RR Brake fluidReserver tank in the Seat Cowl. The stop-lamp switch was replaced with a pressure type when replacing the rear sets, and connected with a watertight connector. View detail
I always use it
I use it all the time, I think it is the best cosmetic product. View detail
Fits: KAWASAKI SUPER SHERPA
Bolt On by Limit Car Type
I purchased a SUPER SHERPA specific Brake hose for front and rear.
Banjo angles are not good, both front and back, like NORMAL.
It was impossible to install Hose in Line.
One more thing, you can specify the color of the hose, but the Banjoetc.
The color of the bracket cannot be specified, and the colors of the front and rear banjo are different,
There is no unity.
Is this how it is with out-of-print for-vehicle parts management?
But I managed to attach it and it's not inferior in terms of functionality,
I am going to use it for this.
View detail
Fits: KAWASAKI Ninja 650, KAWASAKI NINJA400 (2014-)
ACPerformance line (Rear) installed on ER-6F
[How is it used?
Mostly city driving.
Was the one you received as per Image?
Yes, I have it on the front of this vehicle. I have had it on other cars and it was on the Front of this vehicle, as per Image.
Was the installation difficult?
It is necessary to work with a certain amount of thought. Although the product is model-specific, it is not an exclusive design like OEM products, so it is not enough just to follow the instruction manual.
How was your experience with it?
Good as a dress-up. Functionally, the effect is not dramatic.
[Included Parts:were they on?
Product ContentsAll items as shown, plus Sticker, Tie Wrap1 pc.
[Was there anything that disappointed you?
I wish it could be attached exactly the same way as OEM, but I have to be a little creative. However, it is not a car model Exclusive Design, so I think this is what it will be.
Other items that would be helpful
The installation points and hang/instruction manual says to put the Adapter tilted 20 degrees to the MASTER side, but I can't tell from the pictures in the instruction manual if it's facing Up or Down, That doesn't make the Hose routing from the reservoir Tank to the MASTER look very good. After trying many things, I think it is probably correct to turn the AdapterUp, Rubber hose to the down side as shown in the attached picture.
Instruction Manual:Yes, but it is in WhiteBlack and the pictures are small. However, it is still difficult to understand the details.
Note/Banjo bolt is also included, but the attached photo shows a Gold banjo that was purchased separately.
Items to buy together/Molybdenum grease and ClawFootWrench and Torque wrench (if you don't have one).
Opinions and requests to Manufacturer/I think 16,000 yen for front and rear is a little expensive for LightCustom purpose.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL
Anodized Treatment is beautiful!
Control performance is also unquestionable! It is very durable without breaking! The colors are beautiful and give it a custom look, so there are no complaints! Comes with an easy to understand instruction manual and a nice looking Sticker! View detail