Reviews
Easy upgrade
This item is high quality and is very easy to fit. Its a must to get rid of the restrictive stock air filter with a small surface area and this is a easy cost effective solution. Very well made and low maintenance View detail
Superb
incredibly fast delivery,only 4 working days to Lithuania. WOW! after changing the filter, the motorcycle really runs faster. thanks again Webike! View detail
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
I can really help. It is safe and secure.
It is safe because Hook does not move.
We recommend that you take a look at Jtrip's Channel on YouTube for a video showing how to use it.
Work is safe and secure.
View detail
Shape differs from the photo shown!
The photo shown here differs from the photo of the item sent to us.
The photo shows a slightly angled one with a split center, one side was Straight, so I bought it, but the one I sent is 90° right-angled, and the other side is a slightly slanted shape, which is totally different.
Only the color is the same in purple, Material seems to be resin and scratch resistant and looks good, but the shape is different from what I wanted. The price is not good.
View detail
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
I think the texture is good.
[How is it used?
I replaced it and ran about 150 km.
The shape of Lever is slightly different from NORMAL, but I soon got used to it.
Was the one you received as per Image?
Almost as Image.
Clutch lever is a little cheap in the Plastic part.
Was the installation difficult?
I am a beginner and it was very easy because there was a video of the exchange on Youtube.
I think anyone with 8mm and 10mm Wrench can do it.
How was your experience with it?
It looks good because we matched the color to the Fork and Wheel!
[Included Parts:were they on?
Grease is not included, so if you don't have it, you should buy it.
[Was there anything that disappointed you?
Plastic part of Clutch is cheap.
View detail
Save money compared to buying at Rose!
The color stands out and gives it a custom feel, and as a manufacturer, I feel secure. I usually use OEM products, but I bought this product for fractional adjustment as well.
The quality and appearance were satisfactory.
View detail
Fits: HONDA GB250 CLUBMAN, HONDA MVX250F
The texture and shape is so nice that you can hold the Lever all the time!
The adjustment range is quite large, which is convenient, and the large 1-Click angle makes it easy to see the effect. However, the furthest away is too far away to grip, and recently it is too close to full break or full clutch cut.
The color is very nice, I chose Titaniumium color for both Lever and Adjuster, and it matches the traditional atmosphere of GB250 CLUBMAN EXACTLY. I could have chosen a gorgeous color for the Adjuster with Accent, but I think it would have floated around the Handlebar of GB250 CLUBMAN, so I am glad that I chose the same color.
Once, Side Stand didn't go down to the end and I tipped it over, but thanks to Foldable, the lever didn't break! (Lol)
I am satisfied with the WW because the reversible function worked perfectly.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
I love it.
The Large is very good and I use it for Oil change trips.
There is no problem in particular, but if I may be so bold, it would be helpful if the paper could be folded easily.
View detail
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
Wouldn't this be the perfect maintenanceSTAND for Middle motorcycle!
I am satisfied with the stability of the vehicle when using the rear stand, the lightness when lifting up, and the price. I was thinking of replacing the tires by myself in the future, and I am also hoping to expand the range of maintenance of other parts. (The Z650RS weighs 188kg *Rear Carrier would be better) It only requires a little weight by hand. It is very convenient because I used to do one side lift up with a piece of wood.
Comparisons were made with Company S, Company A, and Company J. As a result, we decided on DAYTONA. As the reason for the selection, I considered that the structure of the most load-bearing part is Square Type, which seems to be sturdy, and that it is superior in terms of comparative cost. Also, the fact that the product introduction image is of RS was a deciding factor. The other 3 companies are all sold separately, and S and A are a little cheaper than DAYTONA, but there were some comments that the stability of the frame is not so good. I have not actually used them, so I am not sure.
The Stand Hook holder is specified to have a diameter of 14 to 18mm. If the diameter is larger than this, it will not fit in the attachment. Also, it takes a little getting used to inserting the Attachment.
The only drawback is that the latch of the U-shaped attachment is too thin and I am not sure if it is durable. I am not sure if it is durable or not. I don't know because I haven't used it yet. However, spare parts are available, so there is no need to worry. (This is not a problem for those who can weld.)
J company claimed that the handlebar should be set to "Left" and "Up" when the brake is "STAND-UP", while DAYTONA company claimed that the handlebar should be set to "Straight". I am not sure of the difference, but I found that the fixation of the hook of the front brake at the time of OthersLift up was the same in all companies. I hope this is of some help.
View detail
Used for Overhaul
Used on NSF100 front forkOH.
Essential Items for oil level adjustment.
The hose and syringe are sometimes easy to disconnect.
View detail
Think in terms of replacement frequency, not Power
I don't think there is anyone who can perceive the increase in inhalation efficiency by 0.5ps at Peak with SEROW in the product description.
I'm more of a wash and reuse kind of guy, but it's a lot more work than I thought it would be.
According to the official procedure, wash with Cleaner→ wash with mild detergent→ dry for a day→ apply Oil→ wait 6 hours and when Oil settles, you can drive.
Almost two days if you follow it exactly? If I wash on Saturday morning, I won't make it in time for Touring on Sunday.
If you're the kind of person who changes filters once or twice a year, OEM replacement would be better.
I guess it's for people who want to go as fast as possible in an hour-long Race to change filters in a month, which is often run in Course.
View detail
A must-have stand for circuit bikes
The bike I prepared for entering the circuit this time did not have a side stand.
I couldn't prepare a side stand, so I had to prepare it by leaning it against the wall.
When I looked at the products used by other players, I saw that they used a lot of JTrip products.
I also used JTrip for the front and rear stands. I bought it.
It seems thick and sturdy. I recommend it! -------------------------------------------------- -------- The bike I prepared for entering the circuit this time did not have a side stand. I couldn't prepare a side stand, so I had to prepare it by leaning it against the wall. When I looked at the products used by other players, I saw that they used a lot of JTrip's products. I also used JTrip for the front and rear stands. I bought it. It seems thick and sturdy. I recommend it! Powered by Google Translator
View detail
It's convenient, small and good.
I am currently using the center front stand.
The disadvantage is that it is bulky, heavy, and requires an adapter to be carried.
There is a risk of losing the adapter, so I ordered a stand that hangs on the fork.
First of all, it is very light and has little space. It's easy.
Very satisfied. I think I will only use this from now on. -------------------------------------------------- -------- I am currently using the center front stand. The disadvantage is that it is bulky and heavy and requires carrying an adapter. There is a risk of losing the adapter... so I ordered a stand that hangs on the fork. First of all, it is very light and has little space. It's easy. Very satisfied. I think I will only use this from now on. Powered by Google Translator
View detail
Fits: HONDA CBR 600 RR ABS , HONDA CBR 600 RR , HONDA CBR 600 F SPORT , HONDA CBR 600 F , HONDA CBR 1000 RR FIREBLADE SP ABS , HONDA CBR 1000 RR FIREBLADE SP , HONDA CBR 1000 RR FIREBLADE ABS , HONDA CBR 1000 RR FIREBLADE
Genuine JT Sprockets Rear for CBR600F 2006
Purchased along with the front sprocket as spare to replace my stock ones when needed. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to go one tooth smaller for a bit of a punt to how this compares to stock gearing. Pretty asy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. The cost of the sprocket was excellent value. I also ordered along with other parts so the cost shipping was spread out too. My delivery was at my door and there was no damage during transit. Webike warehouse took the time to make sure that nothing moved during transit as these sprockets can make a mess of other parts less sturdy. The machining of these sprockets is second to none and I have said this from day one of using them. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price before. I will stick with JT Sprockets. I have fitted many many times before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Let's use it for Oil exchange!
When replacing oil, it is easy to fail to catch the oil if the waste oil is thrown away, but with this, it is safe.
There is no such thing as a failure and overflow.
It makes a difference whether you have this or not, and you can replace the oil with confidence!
View detail
For CUB Oil replacement!
I like this one because it is inexpensive, contains two sheets, and is copper!
The oil can be replaced with confidence because it is properly crushed!
It's essential to replace the Oil in CUB110!
View detail