Reviews
For ChainMaintenance and Wheel cleaning.
I bought it because I thought it would make ChainMaintenance easier.
I was not sure about the type that raises by lever since it will be used on a Large Motorcycle, but I decided to use this type that only turns the screw part considering storage.
I lifted the XSR900 on Asphalt and a washed out Concrete surface.
After locking the front brake as described in the product description (I used DAYTONA's Front Brake Vise Lock that I had purchased before), Quantity should be as close to the Swing Arm as possible so that it is perpendicular to the Swing Arm as I was afraid that it would come off during work.:Set
However, if the position is too close to the Tire, the Tire and Body will come into contact when raised, and the Wheel will not be able to turn.
I thought the body was too heavy to raise without using aids, but I was able to raise it by hand as it was without the force of the hand crank becoming too heavy.
I stopped at a point where the Tire floated a little, but there was no slippage thanks to the small protruding ground surface of both the Asphalt and the washout. (I doubt if the protrusions are worn off after use or if they are wet.)
I used to have to move the body back and forth to clean the Chain and Wheels, but this makes it much easier.
The Rear Stand, which lifts up the entire Swing Arm, is also attractive because it can perform a variety of tasks, but it is small and does not get in the way when it comes to cleaning, so I think it is not a bad idea to have it.
View detail
Compact and GOOD
[How is it used?
STREET
Was the one you received as per Image?
Street Image
Was the installation difficult?
The installation itself was no problem as long as you have the right tools, as the instructions are very detailed.
I think there is a part where it is recommended (required?) to use a screw loosener (Locktiteetc.). I think there is a part where it is recommended to use a screw loosener (Locktiteetc.), so please prepare it separately.
It was more of a hassle to remove OEM and put together Wiring.
How was your experience with it?
I am glad it was as Compact as I expected.
It is not noticeable, but the feeling of cutting of the Gold genus is also textured and self-satisfying.
It has been about 6 months since the installation and it has been working without any Chatter sound or Wobble.
One thing is that the bolt on the blinker part sometimes comes loose, so I wonder if it would be better to have a loosening stop here as well. I was wondering.
[Was there anything that disappointed you?
nothing special
[Overall impression]
This is my first Fender Eliminator and I am satisfied with the high quality despite the low price compared to other products.
This is a RECOMMENDATION for those who like a shape that completely loses its tail.
View detail
One of the most convincing products.
The PowerBox is installed by a high percentage of WR250R/X riders, and we are convinced that many people install this product.
The vehicle itself is quite expensive even for a used vehicle, and it is impossible to buy a new vehicle since it is no longer in production, but if you are riding a WR250R/X or have switched to a WR250R/X and have not installed one, you should install one.
WR250R/X has a weak torque feeling at low rpm as a motocross type motorcycle, so it sometimes stalls when the clutch is connected at the start of a movement. But with this PowerBox, the Torque feeling has increased and the kicking out feeling has increased when the Axel is opened.
I had no idea that just replacing this one would have such an effect that I could feel it.
I am satisfied with the price and the quality of the product.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI H2 SX, KAWASAKI H2 SX SE
??Flexible
??Material of the enclosure of the Air cleaner itself is,
The material is moderately resilient, so it can be used with Motorcycle air cleaner box.
The new system can ensure further adhesion to the
H2SX is equipped with Super charger,
In the sense of avoiding Charger's Filter exchange.
We plan to address this issue through frequent FilterMaintenance.
Also,
The price is high, but it is an excellent product that can be cleaned and reused.
View detail
KITACO Cap Bolt Cover
The Cap Bolt Cover of the Handlebar Fixing Section of GSX-S was missing.
buy for Replacement
If you don't buy a cap bolt that fits the size of your cap bolt, it won't attach properly, so check when you buy.
I was told it was black chrome, but I think it is a little lighter and closer to silver.
I'm rating it 4 stars because the durability is unknown.
View detail
![[Closeout Product]Aluminum/Hybrid Iron Rear Sprocket[special price]](https://img.webike-cdn.net/catalogue/images/43994/20-1148hy_01_TS.jpg)
Fits: SUZUKI RMZ450, SUZUKI RMZ450 X, SUZUKI RMZ250, SUZUKI RMX250, SUZUKI RM250, SUZUKI RM125, SUZUKI DRZ400, SUZUKI DRZ350, SUZUKI DRZ250
I am not familiar with this Manufacturer, but I think it is good.
Purchased for rm250
Hybrid steel and aluminum construction
At 49T, I don't want to use iron Sprocket because it's heavy as a rock.
Since it is made of steel and aluminum, it is reasonably light in weight.
You get the durability of steel.
View detail
Stanley LED Bulb Standard
Used for ADDRESS V100
I used it for a tail lamp, but since the valve of the tail lamp of the ADDRESS V100 also serves as a license plate light, I chose a bulb color for the light emission.
Easy to replace as you just replace the Normal valve.
View detail
Dress-up
The finish was very good and the dress-up was beautiful. View detail
Just a good Size
It is about the same length as the kawasakiMotorcycle key. View detail
It was easy to replace!
I purchased this product to replace the spring in the rear suspension of my GSX-S125.
Unlike the Type in which Both Sides are Hook style, this Type was selected because it is used to fix One Side of the Shock with Bolt, which I imagine provides a high level of security.
Product Description For Twin ShockRear Suspension for VINTAGE vehicles, etc. I was a little concerned about the sturdiness of the Large size, but there was no problem.
The spring on which the hook hangs was cut from a common non-slip Seat and fastened with a Tie Band to prevent slipping and scratching.
Because of the structure of this tool, it is not possible to use a power tool to turn the long nut to be tightened, so to make it easier, a Ratchet Type Glasses Wrench was used.:2pcs prepared. (At a certain 100-yen shop, the unit price is 300 yen.)
I was worried about various things, including injury, as this was my first time to replace the spring, but thanks to this tool, I was able to replace the spring easily!
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
To make the long haul a little easier.
Would it be easier to have it?
I had never put this kind of thing on before for personal appearance reasons, but I think it would have been easier if I had.
In case of GSX1300R HAYABUSA, I am a little disappointed that there are not many places to touch when I put it on the Limit under the Tank when I do the Knee grip.
It took me quite a while to think that I just had to put it on.
Of course, the more time it takes, the more beautifully it will be applied so that no air will be trapped.
View detail
Installed on YZF/R25/2019
Installation was easy, about 15-20 minutes, and the Tank has a volume output, looks good and is very lightweight. Delivery was also faster than I expected, shipping a few days after purchase. I think I made a good purchase. Thank you very much. View detail
YOSHIMURAHeat Guard
The appearance is improved when installed together with the Yoshimura cyclone. If possible, I would like it to be attached to the Exhaust SystemBody. View detail
I used to get it for free and I was Big surprised to see it for sale.
It would be useful if it were available.
Wouldn't it be a free Service?
View detail
Genuine GBRacing Engine cover set for Ninja 650
This is a set for the Ninja 650 of a customer who wanted to add a little more protection to the casing of their bike. I have personally used GBRacing many times in the past for both my bike and customers bikes and know they are second to none for protection of you beloved. Finding the correct set was really easy as Webike do list all the models these kits fit. I also cross checked this with GBRacing website just to be sure I did not write the wrong number down. Really good price for this set from Webike and pretty much the same as I could source locally here in the UK. Yes, you can get other manfacturers who make sets like these but I have my own experience of how well these perform in the event of an off. They do take a good beating but essentially, these are to protect you casing. They also look really cool too. For all you get in this kit, the value for money is brilliant, 3 pieces in total and one of the best set of bolts you could ask for. There is the alternator cover and clutch cover and finally the pulse cover. Great price for a 3 piece set. The composite is not just plastic like some of the other kits you can buy, they have a percentage of fibre too for strength and durability. GBRacing have really done their homework here and I can confirm the durability is epic. All was packed out really well and even the small pieces were protected during transit. Upon opening the set box, I was really happy to find all was present and correct, the right amount of bolts etc is always a bonus. Having had previous experience in fitting these, it was a piece of cake. It's pretty much the same for each model anyway. Take your time, set out the individual covers and allocated bolts and it's alot easier than fumbling for the right bolt. The customer is really pleased with this kit and to be honest, I am too. Looks great. Thank you Webike, awesome services. View detail
Looks great and matched the allen key engine bolts
Was really happy that i could buy a set of these bolts as they looked great and matched my allen key engine bolts, they fitted really well and the nuts were very tight so they couldnt vibrate loose. View detail
Fits: HONDA CD50, HONDA MONKEY, HONDA KITACO MONKEY series Bore Up Kit (Standard/Standard Type2) Cylinder head, HONDA GORILLA, HONDA DAX, HONDA CHALY 50, HONDA CHALY 70, HONDA DAX70
Great power mod for the price
This ws an awesome power mod for price, gave the bike a nice grumble and felt like it had some more power down lov in the rev range, fitted really easily View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA CHALY 50, HONDA BENLY50CD50
Lots more power!
This was an awesome upgrade to my gorilla, it gave the bike alot more power, fited really well, packaging was great and it stayed safe during transport View detail
Was great to a 12v headlight
I needed to upgrade my headlight so needed this plug for the loom, it fitted really well to the original harness and was easy to fit to the headlight. View detail
Fits well
This fitted really well! Looks great and the shiny part with the branding on it makes the bike really stick out. had lots of room to fit it and came in a great package View detail