Reviews
Cb400f Aluminum Box Swingarm
First the good: swingarm is well constructed, attractive and fits well. It looks quite racey installed, and if tweaked (see "the bad"), it has zero play in the pivot. Comes with needle bearings rather than bushings, and is nicely polished. Tig welding is excellent. Now the bad: The large outer tube forming the main pivot tunnel was distorted out of line from welding. To compensate, the fabricators use some tapered bushings and an oversized ID internal steel collar tube that simply will not work properly as received. The slop in the pivot with these parts is really excessive. So all the pivot parts but the bearings can be discarded, and you'll need to machine your own pivot. I used the factory honda center collar for the 400 and turned down the ends on a lathe to press into the bearing races, but there are other ways to solve this issue. So this swingarm is not for the average skill modder. Other issues: lead time is months, and you'll need to get a slightly longer chain. Also note that you'll have to bend the brake rod about 10 degrees, see photo. But solve these issues and you'll have a race ready rear end. View detail
GCraft Swing Arm Triple Square
As long as you have a Jack, you can easily replace it.
It has not been driven yet, so the effect is unknown.
I think we were able to reduce weight from OEM.
I hope it will last for a long time.
View detail
Fits: その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey
The accuracy, but the color …
As others have said in their impressions, the Guide on the rear wheel of the Arm has to be shaved off a few millimeters with File to fit.
I also purchased the Black, and the Color:I painted it myself because it was Black (?) like Gray. So I painted it by myself.
It's an inexpensive Swing ArmKit, so I thought it would be in the okay category.
View detail
I think that accuracy is high
First we took out of the box and there was a dent in the Stabilizer section due to its appearance. It is good because it is a hard to see part - - -.
There is no problem with regard to installation.
View detail
Importance of Chain slider
Built and textured satisfaction. It is a shame that it is late Chain slider is lousy. It is only about 10 cm in the Top, not under the mount. It interferes with Chain. It is a shame because it is not cheap. View detail
Fits: HONDA NS-1, HONDA NS-1
It attached to NS-1 which had ridden when we were high schools. There is a memory which fell in love at first sight those days, and poured in the cutting tool cost of the moon. Mirror surface finish of structure was beautiful at it. Dress-up n
It attached to NS-1 which had ridden when we were high schools.
There is a memory which fell in love at first sight those days, and poured in the cutting tool cost of the moon.
Mirror surface finish of structure was beautiful at it.
Dress-up nature up is quite high.
Since it is the components which are not seen easily and does not wear rash with others, the point is quite high evaluation.
Since the mirror surface finish performed in addition it was hard to turn at that surely a pure twist is rigid and the pure twist of a degree of comfort is also heavy several kilometers and a corner and they felt had been somber immediately, it was repolished repeatedly.
Before attaching, we recommend you to carry out top coats, such as a urethane spray.
View detail
Fits: HONDA APE 100, HONDA APE 50
It was used for ape100. RIA was disk-ized, and he thought that he would run a circuit by a play grade suitably, and it attached. Dress-up nature up is very high. Only now, if there is no other mist since it becomes lonely, it is uncool on the
It was used for ape100.
RIA was disk-ized, and he thought that he would run a circuit by a play grade suitably, and it attached.
Dress-up nature up is very high.
Only now, if there is no other mist since it becomes lonely, it is uncool on the contrary.
Although attachment was an easy, since it was not able to put in a pure wheel as it was, the wheel was also summarized and it was put in.
although I think that it is merit that-izing can be carried out [ disk ], a price is odd when all are done -- it is -- it is .
.
.
.
Moreover, rigidity is not necessarily high and does not necessarily go up travel performance, either.
.
.
.
It is delicate.
View detail