Reviews
If it could be positioned more precisely, there would be nothing to say.
The Arm that holds the Mirror rotates parallel to the Handlebar and positions it to the Large side, but it cannot be fixed at any position. If the Arm is fixed by extending the Arm outward from the Handlebar End, the width of the car may become too wide, which may be illegal. If the Arm is fixed by extending the Arm outward from the Handlebar End, the width of the car may become too wide, and it may be illegal.:), so just moving it by 1Click is quite inward, and your arm is reflected in Mirror quite a bit. Naturally, you cannot see directly behind you. This is a little disappointing.
Triumph's Bar end mirror looks like it would be easy to see.
View detail
high quality
We were tired of OEM mirrors, and decided to switch to bar end mirrors, which we had been considering for some time. We were looking for a mirror with a reasonable price, a certain angular shape, and gold as the material, and arrived at VictorySeries. I bought this one with a high sider bar end and a cheap Mirror Hole Cover Cap, because the shape of the bracket can be tightened to the bar end and the surface treatment is also smooth.
Although the installation itself is not difficult, some people may have trouble removing the OEMBar End with Screw lock. If you are not confident in your muscular strength, we recommend you to use a long-spinner handlebar. The weirdest thing is to find a position where the Mirror can be installed at an angle that is both cool and practical. It's fun to do so, and I think everyone likes it.
I have an OEM handlebar on my Motorcycle, so I installed the Mirror up because it interferes with the Motorcycle and the Mirror when facing down. The distance to focus when looking at the Mirror and Meter is the same, so my eyes are not tired at all. Rearward visibility is also high, so you can see right behind you.
It is an OEM ratio, but the change is better looking and more practical. Good purchase.
Also, I have read on some sites that Mirror made by Hi-Sider is easy to fall off, but I have not had any problems at this point in time, about a year after the installation.
View detail
Great sense of luxury.
For Triumph Thruxtonfe.
BodyPlastic products are also available, but this Gold genus is very high-end.
OEMs will be removed.
View detail
Very good!
I used high cider a lot since I was headed there because it has a good texture and is easy to handle.
This product was less expensive than the rest of the Series, but the design matched the body of the car to which it was installed.
The bracket connected to the mirror is separate from the bar end and can be easily detached, so it can be used when driving on circuits, for example, and the angle can be easily changed or the top and bottom can be easily replaced.
The design and “y Casting feeling ” are also high Level, but the Variation of the Spec. and the ease of use are highly recommended.
You can be proud to say that you are a manufacturer in Germany.
View detail
Easier to see than expected
The quality is very good. The rear view is better than I expected because it can be mounted on the side, and the bar end mirror does not rotate loosely or shake with vibration as is common with bar end mirrors.
If the price were a little lower, I would have nothing to say.
View detail
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
Cospa is quite good.
Anyway, cheap is the best Merit.
The quality is in line with the price, especially the bolt on each part is quite cheap. Be careful not to over-tighten the bolt, as it can easily be nipped.
It is by far lighter than the expensive bar end mirrors of DAYTONA and TANAX, so there is rather less anxiety about it falling off.
View detail
Minimum required visibility
Size is small, so visibility is minimal.
On the contrary, it makes you look at it neatly lol.
It only worked well outward, but I don't feel like I've widened it that much.
With normal Mirror, the arms are reflected to a large extent and the camera is scared, but this has been eliminated, which is what we were aiming for!
Quantity of Washer:Only 1pc. is sandwiched, but there is no interference with Axel
Adjustment is a bit of a hassle…I had to adjust the angle of the clutch lever because it was interfering with the clutch lever.
Well, the rest is definitely Parenthesis good lol.
View detail
A little wobbly, but … looks good.
I installed it on CBR400R.
The handlebar was previously replaced and installed with 16mm inner diameter separate handlebars.
It will probably loosen and fall off while riding, so it must be retightened.
There is a wobble.
If you're concerned about it, you shouldn't.
View detail
Design Excellence
I have purchased high sider bar end mirrors in the past, and this time the quality is as high as ever.
There is no rattling or vibration-induced blurring.
Above all, the thinness and smooth finish of this Mirror and its design to match the Cafe racer are superb.
It is an expensive category for Mirror, but I think it is worth buying.
View detail
Installation on GROM
We are a FOR JAPAN MODEL distributor, and we will review the same products as DAYTONA products.
[How is it used?
I bought it because→OEMMirror is hard to see!
I bought this product because DAYTONA product is out of stock and the next one is supposed to be around 24/5.
Was the one you received as per Image?
Yes
Was the installation difficult?
→ The installation itself is easy (I installed it using the HighsiderBar EndMirror Adapter).
However, the removal of the OEMBar End was a challenge.
How was your experience with it?
→Now you can see directly behind you where you couldn't with OEMMirror!
[Included Parts:were they on?
⇒ yes.
[Was there anything that disappointed you?
→ nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
→Translation differs from DAYTONA products (does not come with the instruction manual, please enter here).
(The DAYTONA version of the instruction manual can be viewed on the DAYTONA website.)
Installation on vehicles after 2006 is at your own risk
View detail
DAYTONA Bar end mirror Montana II
We installed this handlebar facing downwards along with the crf250md47MOTARD conversion. The Handlebar area has been tightened up considerably and parenthesis has improved. I am now able to check the rear more than before with Mirror only, so I need to check visually. The price was a little high, but I'm glad I bought it because I was able to create my ideal custom. The price is well worth the quality. View detail
It's all right.
The product itself is good. The quality is high and there is no blurring.Quantity:Pair (for Left and Right) Ordered two for installation. However, they happened to be from different lots, and one of the screws for installation was silver and one was black. I'll have to get these colors aligned …. I'm patiently using it because it works fine. I'm thinking of painting them a color sometime soon. View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
SMART!
Bar end mirror, but in the case of Haimota, it fits perfectly in the OEM hand guard.
It will look better.
I like it because it is officially certified and will pass vehicle inspections as is.
View detail
Best Bar End Mirrors You Can Buy For Your Rebel 1100
Still, nowadays, there aren't many after-market parts for Rebel 1100 in the US. Stock mirrors are horrible, Can't see anything behind you with your stock mirrors. So, I have looked everywhere from eBay to Amazon, and found nothing that looks good. Also, it was hard to find all the parts that were required to install the mirrors if you found the mirrors. But, when I visited the webike website it was super easy, everything was so easy to find and super nice quality!! Love these DAYTONA bar end mirrors on my Rebel 1100. View detail
Different presence
I think it originated in Europe, but there are a few models here and there that have bar end mirrors as standard.
Inspired by that, I put it on Mr. MONKEY this time.
I am satisfied with the change from the OEM's Type, which insists on a great height, to the Compact and lower Forme at once.
However, as MONKEYOwners can easily imagine, there will be a lot of scaremongering.
It is unfortunate that the objects reflected in Mirror appear to vibrate quite a bit.
Well, if you can see it as Style oriented, it will be one of the good Custom.
I feel again that Custom is quite profound, and this improvement (modification?) is a good thing. I am very happy to see that the new
View detail
clear, wide field of view
I installed Kijima Tech 11 mirror bar end on Suzuki Hayabusa with adapter bar end and collar included. This mirror bar end has a very wide and clear viewing angle. The viewing angle can be adjusted according to the rider's position. View detail
Excellent Quality
About quality and texture: Very high quality machining and finish, glass is very clear. Products to buy together: Daytona bar ends Difficulty of installation: Sent to workshopto remove OEM Honda bar ends and core. Cost performance and comparison with other products: Preimum but value for money. View detail
Easy-to-obtain Bar end mirror
Breaking OEMMirror for imported cars is replaced as soon as possible because of concerns about delivery time.
The bar end mirrors provide good forward visibility, and on top of that, very good rearward visibility.
I was concerned about the Mirror shake due to the vibration of the Aprilia 2-cylinder engine, since it cannot be mounted on the OEMBar End.
Since we have no choice but to make our own Bar End, it would be helpful if we could have several types of Bar End with different weights in Option.
View detail
High sider Bar end mirror Montana II
I was looking for a crf250lsMOTARD with Mirror facing down and found this product. The price is also expensive for Mirror. However, it is well made. The Mirror does not shake due to vibrations while driving, so the mirror surface is clearly visible. However, the visibility is poor due to the characteristics of this Mirror. I am satisfied with this product because I value the appearance. View detail