Reviews
Good manufacturing, as good as OEM.
It can be tightened with confidence.
It is well made, so let's tighten it up with a proper Band.
View detail
Looks good
The silencer band looks good and fits well my Yoshimura Cyclone Carbon fiber exhaust. I am very happy to have bought this item View detail
Repair of external Exhaust System.
The Band of Earls Gear's Slip-on Silencer that I bought used is not usable because the Screw does not turn in RustRust.
I checked and it was the same as this product.
The band itself is stainless steel, and the screws are iron, so Copa Coat is applied to the screw threads to prevent biting and rust.
It can be tightened normally and looks normal. No exhaust leaks, probably because it is evenly tightened.
I thought it was a good, safe product.
View detail
For carbon silencer.
To Maverick's MV83Carbon silencer.
The Maverick Exhaust Band is a common silver color, so I thought it would be more consistent if I changed it to black. I changed it to black to make it look more consistent.
The color and Size matched.
The Bolt hole in the band section is narrow between the Bolt hole and the Exhaust System, so it might be a little bit higher.
The bolt nut that came with the product was too small to use, so the OEM product was reused.
View detail
It's a nitro Band for a nitro Silencer.
It's Nitro's Silencer, so it's Nitro's Silencer band.
Most of them come with Silencer, but Nitro is sold with Band separately. (Lol)
Size is also Exactly!
I think the price is a little high for Band.
View detail
KIJIMA Stainless Steel Exhaust Band
I used to use a different band, but when I tightened it, the bolt diameter was a little thin and it was not strong enough.
After a certain amount of use, it was easy for the screws to be ruined by heat and tightening.
This Band has a slightly thicker Bolt and has no strength problems, so this Band is now used.
View detail
It's beautifully made.
I purchased this for my Yamaha SEROW which has a round external Silencer installed.
I made my own back guard to be attached to the silencer to protect the back for long touring. I have been using this product for a long touring, but I have to replace my round silencer band with an oval silencer band because the stainless steel is very hard and it is difficult to use it for other shapes. In my experience, it takes a long time to bend stainless steel by hand or to form it into an oval shape, and the result is not good. Unfortunately, the round Silencer band has been put into temporary storage.
The product itself is fine and well made; it is made of 1mm Stainless steel flat plate machined to 110 pie inside diameter. The bracket is raised vertically from the circular shape and is hammered to hold a right angle. The cap bolt is 25mm long, 7.7mm in diameter, and only needs an 8mm mounting hole. The Elastic band is not just a black flat rubber band, but is made with a horizontal gap to prevent it from moving. The bottom of the engraved Bracket is clearly marked 110 Pi. This kind of workmanship is very helpful when you own several similar parts.
It is relatively easy to make round-shaped bands made of gold where there are machine tools, and other manufacturers also offer a variety of bands. KITACO is a good company that sells at a cost like ConveniencePartsSeries.
View detail
Note to Size.
It is just an Exhaust Band.
Purchased this CB400SF nc42 2016SPMODEL OEM Exhaust Band because I lost it.
Band is Stainless Steel, but Bolt is Steel.
One sizeSmaller than this, the company's Exhaust Band just barely didn't fit and I had to buy a new one.
The π diameter or measurements are rather strictly made, so it is recommended that you measure your measurements before purchasing!
View detail
Used for I.D. 60.5Φ.
63-68mmSize is used for Exhaust System with inner diameter of 60.5Φ.
Looking at the cost of Bolt's surplus, it would have been better if it had been a little smaller.
However, there is no problem at all in fixing it, so I am satisfied.
View detail
Band
This is used to attach Rubber to Silencer's fixed band to prevent scratches and vibration.
The installation is a good feeling, but I thought it would be better if it was slightly smaller so that it would be a little tighter.
I am glad to hear that the scratch and anti-vibration rubber installation went without a hitch.
View detail
Silencer replacement
Used to replace Silencer on CRM80. View detail
It was a perfect fit!
I installed it on my Universal Silencer and the size is perfect and I am Large satisfied. View detail
Buy for Φ86
[How is it used?
I changed the silencer of my YAMAHA/XJR400R from MotoGEARΦ100 to K2tecΦ86 and bought this silencer band for Φ86.
Was the one you received as per Image?
It was just as Image.
Other manufacturers also had Φ86, but Silencer itself is also a K2tec product, so we decided to choose this one, which is also from the same manufacturer.
Was the installation difficult?
If you have ever done a Silencer replacement, it is not a LARGE task.
Also, even if you have never done this before, it is not that difficult a task.
How was your experience with it?
It is not particularly good or bad. It's a special product, so it's not surprising.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
The inner rubber part is very easy to come off, I think it is the same for MotoGEAR and OthersBand, but the rubber part of this product is easily gapped.
View detail
too expensive
Quantity in the photo:2pc. Set is in the picture.
Price for 1 pc!
Isn't 1pc.3300 yen too expensive!
View detail
Material:Stainless Steel is good
I made a mistake with the size, but I think it is a very good product, Stainless Steel and it won't rust, and considering the burning thing, it is a Material:Stainless Steel exhaust pipe and silencer with band and material:Stainless Steel is a good choice. View detail
Used in SR400
Material:The exhaust pipe and silencer are made of Stainless Steel, so the color of the Plating Exhaust Band is different from the Plating Exhaust Band, but the Material:If the band is made of Stainless Steel, the burnt color will look natural. View detail
That's the exclusive product
I purchased this silencer band at the same time as the Φ90 Stainless Steel Shotgun silencer, and although the less expensive KITACO Universal Silencer Band would have been fine, the silver one for the Φ90 was not in stock. I bought this one because the silver one for Φ90 was not in stock.
The fit is perfect and the quality is perfect, as expected of an exclusive product, but I think it is a bit expensive.
Also, the band rubber does not have a rib, so it was easy to position gap when fixing.
View detail
Silencer band
We purchased Silencer's Band exclusively for the Manufacturer. View detail
Fixed Chamber
It is installed to fix the Chamber.
The price is not that high and it can be fixed.
The rubber cushion was too tight to be tightened. I was able to fix the cushion by forcing it.
View detail
For fixing Silencer
Purchased for use in the Band section for fixing Silencer.
It seems to be good for vibration and scratch protection. The price is not that high, so I hope it has some Rubber durability.
The product is not that expensive, but the cut ends are slanted, and I had to cut them a little to use them. I would like to see the product sold with a straight cut.
View detail