Reviews
Fits: HUSQVARNA TE300, SUZUKI RM125, SUZUKI RM250, KAWASAKI KX250, KAWASAKI KX125, HONDA CR250R, HONDA CR125R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX
Soft touch
Although the hand guard was still attached, the throttle tube was cracked and battered from the repeated impact of falls, so it was replaced.
Since I wanted to try a different grip on the Clutch Side than on the Normal side, I chose the Soft side.
I haven't driven far or on forest roads yet, but I expect it to reduce fatigue.
View detail
Fits: SUZUKI RMZ250, SUZUKI RM250, KAWASAKI KX450F, SUZUKI RM125, KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX125, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR450F, YAMAHA WR400, YAMAHA WR400-450F, YAMAHA WR450F, YAMAHA WR400, YAMAHA WR400-450F, YAMAHA WR250F
Very meaningful from the second time!
The Axel side is relatively normal as a grip with a collar, but this is the first time for me to see a clutch side with a collar.
I think it is very rare to buy a vst250sx, especially for vst250sx, but I think it is effective for people who want to quickly set up and remove the camera (probably for off-road use).
In my case, I used it with the end open, but this process was quite troublesome, so I think it is best to use it on a normal Motocross car that is off!
View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F
Best of Thin Grip
YZ125X (MY22) The first time I went out to Race, I installed it on a
Before this, ZETA's BaseGripSlim (ZE47-6021) used to use.
situation in which a person's hands are small and their face is partially concealed (esp. from behind the scenes) (Gloves are available in Men'sS Size or LadiesL Size) So, I am constantly looking for a thin Grip.
If you look at MAJOR, I think this ODI no-waffle or ZETA's BaseGrip would be the smallest diameter at 29mm. (Check yourself)
I feel that there is less vibration in my hand compared to my previous ZETA BaseGrip.
It may be a difference in Compound, since ZETA should obviously be thicker in Rubber thickness due to its structure.
Of course, the ease of installation that Lock on grip offers is very good.
The ease of removal is very appreciated when you want to switch between multiple Handlebars for a test run.
Also, in the case of YZ125X, it can be installed with the supplied Cam.
There are two caveats.
One is with the hand guard.
Since this grip has only a closed end, it is necessary to drill a hole in the grip end to attach a closed hand guard.
Unlike ordinary grips, the inside is made of a plastic tube, so it is necessary to use a Footpeg Drill or similar.
The other is with Handlebar.
If the Knurl on the Clutch Side of the Handlebar is Large, it will not fit unless the Knurl is cut away to some extent.
I put it on a Pro taper Konzer and it scraped off quite a bit of Knurl.
I had a ClosedHand guard + Konzer, so it took me about 30 minutes to install it.
I will have to use it more in the future to see how it works, but I feel this is fine unless you are very Muddy.
View detail
Fits: HONDA CR125R, HONDA CR250R, HUSQVARNA TE300, SUZUKI RM250, SUZUKI RM125, KAWASAKI KX250, KAWASAKI KX125, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250, KAWASAKI KX450F, KAWASAKI KX250F, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW225WE
fictitious advertisement
Since lastOrder
I was informed that it was discontinued and then the listing was also discontinued.
I give up.
I ordered it, but they said they could not accept my order because the product was discontinued!
Please don't put anything on the site that I can't afford.
Please be aware of this, everyone!
View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F
Quite soft.
Compound is quite soft.
The Grip is soft enough to be squishy when pushing and carrying Motorcycle. However, because the grips are thicker, it is easier to raise the arms. It is also a little harder to use intuitive controls.
Both the Clutch Side and Brake Side can be easily replaced because they can be installed without glue, but I am a little concerned that the Clutch Side may come loose.
View detail
Fits: KTM 250 EXC, KTM 300 SX, KTM 300 EXC, KTM 400-525 SX, KTM 400 SX, KTM 525 SX, KTM 400-525 EXC-F, KTM 400 EXC-F, KTM 525 EXC-F, HUSQVARNA TC 125, HUSQVARNA TC 250, HUSQVARNA TC 300, HUSQVARNA TE300, KTM 250 SX, KTM 200 EXC, KTM 125 EXC, KTM 125-200 EXC, KTM 200 SX, KTM 125 SX, KTM 125-200 SX
Used on YZ125X. Thin and easy to grip
I have small hands, so it is good that it is thin and easy to grip. The end part is made of aluminum, and I feel it is difficult to drill a hole in it. View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ400F-450F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR400-450F
Once used, Lock on is convenient
I tried odi's Lock on grip on my wr250f and have been using it ever since, and it is easy to install with the Hexagonal Wrench.
The way it fits in your hand is also good, as is the way it feels when you hold it.
However, this PRO V2Grip is a soft compound.
It would be good for vibration reduction, but it is rather fast.
I prefer V2Grip in Medium compound.
So I give it 4 stars, but the product is good.
View detail
Much more comfortable then the original grips
About quality and texture, I can confirm that the quality is great and that the material used is a durable rubber with a soft texture. About the feeling of use, I find the Vans rubber grip set much more comfortable then the original grips and are perfect for a custom look on the Monkey 125 with their grip design and available colours. Products to buy together, A new throttle tube, specifically a quick throttle tube from Kitaco would be ideal to add to your cart for improving the throttle reaction time. Difficulty of installation, I can say the fitment of the rubber grip set for my installation was average due to the difficultly removing the original grips in one piece as I wanted to retain them for re-installation in the future. Cost performance and comparison with other products, Pricing of this product is high. You receive a very cool designed rubber grip set that help reduce vibrationto your hands but there are much cheaper grip sets available from other brands if the price is too high for you. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Installed on a child's electric Motorcycle
There was no Grip for my child's electric motorcycle (Yotsuba Moto) that fit the thickness of the Grip, so this one fell into that category. View detail