Reviews
Clearance.
Rear master between Swing Arm and Rear Sets
Yes, because Clearance is usually in contact with Nut.
I was looking for a thin Nut.
Stainless SteelMaterial with Lock nut.
It was the right material!
View detail
Good product
I used it to adjust the Exhaust Band fixation.
As a Spacer, it is neither good nor bad.
The sale of Small portions is very helpful.
View detail
Good product
I used it as Nut for Exhaust Band.
Gold color is One point and I like it.
The durability is unknown as I just put it on, but the platings did not come off with the tools I used during installation.
View detail
Quantity:It was 1pc.
Quantity in images:1 Set of 2pcs.:1pc
It says one in the description, but I missed it.
I bought the Spring washer because I was concerned about the thickness of the Nut when I stacked the Spring washer on top of each other as much as I needed, so I bought it.
The experiment is underway to see if the tension from the Washer can free Mirror from bending on its own.
View detail
ติดแล้วเพิ่มความเป็นญี่ปุ่นให้รถทันที ของต้องมีสติ๊กเกอร์หนากันน้ำติดมาเป็นเดือนแล้วไม่มีลอกหรือเป็นขลุย View detail
It comes in a whole range of sizes, so you can choose!
When changing the Handlebar, we needed to change the mounting of the Steering Damper and used it as a spacer for height adjustment.
For M8's outline φ20mm are suitable for the area where the steering damper is hard to be installed. 15mm height was purchased and then the height was shaved off by 2mm to 13mm to fit the car. The finish is beautiful and it doesn't look like it's been taken off.
If I ever need a Spacer for any kind of DIY installation again, I'll be looking for one from this K-CON lineup.
View detail
I didn't have a clip on the main jet, but here it is!
The main jet on my Motorcycle's OEM negative pressure carburetor is not adjustable, it's a Fixed Type! I was disappointed that I couldn't change the number of steps with Clip, and then I found this product!
It's great. That's what KITACO is all about. This kind of product gives me hope.
I was disappointed that there were a lot of Parts missing from the carburetor itself, but I was able to reassemble the carburetor safely and reseat the parts that had valleys as a result of adjusting with Shim.
It's hard to understand the product description, but it comes with a 0.3mm/0.6mm thick Shim.
In terms of the number of clipping steps, it was about 0.5 steps even if you pile up two of them.
In my case, I stacked them, so I adjusted about 0.9mm.
This is a two-cylinder motorcycle, so you can use this product as a quantity:I bought 2 Sets and adjusted them.
View detail
To manage maintenance
I have a total of five motorcycles and I always forget when I changed the oil, so this helps me keep track of the dates and distances I changed them. It's very convenient because I can easily replace them wherever I put them. View detail
สวยงามตรงตามรูป กาวที่ให้มาเหนียวติดทนไม่ต้องกังวนเรื่องหลุด กันน้ำได้ดีล้างรถไปหลายรอบยังไม่มีรอบถลอก View detail
To prevent rust.
MirrorMounting Bolt tightening holes
There was a pool of water and Rust.
I bought a Cap!
There was one with and without a rubber at the end of the cap, but
The part to be used this time is the Bolt that attaches to the horizontal direction
So, is it Large sturdy without Rubber? I think so.
Does the size fit since it's a special bolt?
I was worried, but the Exactly/Fit
This way, there's no water pooling in the car wash or rain.
It won't rust and is safe.
Quantity needed:2pc. Against the Set
Quantity:1 Set of 4pcs.:2pc. The Set becomes a spare part.
It was a waste of time to find a usable part of the
I couldn't find anything.
Quantity:1 Set of 2pcs. products would also be available.
Thank you.
View detail
You can find the exact Size you want!
If you're doing maintenance or custom work, you'll probably use color a lot, but it's inconvenient because it's surprisingly not available at Home center or even in stock at mass retailers.
I used to use several layers of Washer as a color, but it didn't look good….
After all, a solid color is good! It's also a good point that it's Black Anodized so it doesn't stand out!
View detail
Ideal for home-made Ducts, etc.
I used it to customize around the Intake of MT-09SP. Because I cut the introduction board of air to Large width and cut the hole of Air Box secretly, I put up a net to prevent Garbage from entering.
I chose Sugar Crystal because I can cut only the large size of the air cleaner.
View detail
It's easy to choose.
These colors are hard to find at Home Center, but
With the K-CON KITACOConvenienceParts Aluminum spacer, it's easy to choose your size.
It would be great to have everything in stock.
View detail
In Footpeg's colors.
Used for the Footpeg colors, slightly longer Bolt and Quantity:You can extend the footpeg a little bit if you build it in Set.
I think that this will be a setting of personal preference, but Universal color is infinitely large in usage.
View detail
Fixed part protection
The CowlFixing Screw is for protection of fixed parts and to prevent wounds.
OEM Products are expensive, so this is a substitute.
The number, the price and the price are inexpensive enough to make it functional.
View detail
To adjust K-PITLever
I bought it to adjust the wobble of the K-PITLever.
As a result, there were few gaps and no need for installation.
The price is so low that you should buy a body that needs to be adjusted.
I will keep it in case I need it someday.
View detail
To adjust the wobble of K-PITLever
I bought it to adjust the wobble of the K-PITLever.
As a result, there were few gaps and no need for installation.
The price is so low that you should buy a body that needs to be adjusted.
I will keep it in case I need it someday.
View detail
Black chrome?
It is Black chrome, but it is not so black as almost Chrome image.
If you ask me. Is it a little Black? That's about it
Cap bolt's inner hexagon with Exactly Uniqlo plating is transformed into a high-grade bolt
Don't make a mistake as it's not something you can put in the Screw hole! I made a mistake, W.
Is it a bit high? Maybe you could get 10 for 1,000 yen?
View detail
I'm not very good at finishing or anything.
Pulling a lathe by myself is a pain in the ass!
It's helpful to have these things on sale when I'm in a bit of a bind.
Sometimes I wish I had a few more thicker lineups, but I'm just thankful that they have this stuff available as a ready-made product.
Every time I use this kind of thing, I think to myself that I should thank the Manufacturer before I complain about anything.
View detail
Purchased as a spare
I bought it as a spare in case something happened.
I haven't actually used it, but it looks solid in my hands.
View detail