Reviews
Fits: KAWASAKI GPZ900R
extremely sturdy
OEM Resin Bracket, only has a squishy feel.
Since the Tail lens unit is suspended and secured to the Seat rail from the underside, it can be forgiven for being a bit squishy.
This was already starting to ripple even before it was a few years old. It's like an apologetic Cover.
The aluminum plate is now anodized black, making it sturdier and sharper.
Now we are at ease.
View detail
![Temp meter stay "Marumie-kun" YOSHIMURA PRO-GRESS [Progress] Multi-temp meter support](https://img.webike-cdn.net/catalogue/images/126077/bg-tms-y02bk_01_TS.jpg)
Fits: Others
easy to read
Can be installed in the middle of the Handlebar Clamp
It was easy to install
Easy to check voltage, oil temperature, clock, and
I think it's a good product
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Very Nice
Very nice compliment to the Pod filters. It gives more storage and blocks the gap. It is also a nice thick quality. Just be aware that the fact that it is mounting on the tank bolt only means that it is not very positively located especially at the bottom. but it doesn't matter too much as you shouldn't put very heavy items in there anyway. View detail
Fits: KAWASAKI ZEPHYR400χ
BaGOOSE integrated Fender Eliminator Kit installed
It fits perfectly and is easy to install. It is very good to have a wider cargo space and to be able to load tools, etc.
Clearance of Rear tire and Fender will be somewhat less.
It takes a little care when going over steps.
I'm glad I put it on.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
appearance
OEMPlate tends to crack, so I bought it for its appearance!
Check the position of the holes when installing.
I think the product is done by punching out the outside, but that process is sweet.
Looks and feels TEXTURED!
After installation, you can only see the sides, so I think we need to take care of that first.
Also, Anodized is not processed well, Red but not dyed well.
I know it's a cheap product, but I'd like to see them do a better job in that area.
I can't tell from a distance.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
To prevent oil leakage from EngineTop
There is a constant oil leak from the EngineTOP of Initial Model Zephyr 750!
Oil leakageConstantly covered with oil from the Cylinder het, at first, Quantity:Pair (for Left and Right) I was told that there was a leakage from the moon-shaped rubber packing of the "Zephyr" and I additionally plugged it with liquid packing, but it had no effect.
advantage
No more oil leaks.
Can be pontooned.
The cause of oil leakage can be identified.
Disadvantage
The bolt is replaced only by screwing it in a little tighter, but forcing it in deforms the bolt head.
If possible, it is recommended to replace the Gasket and CamshaftPlug, so please consult with Wallet.
When replacing all the parts, the Tank/Quantity:Pair (for Left and Right) Without removing the Coil Horn, the Bolt cannot be removed from the front and back of the Engine Top Cover due to the lack of clearance.
If there is oil leakage from other locations than the bolt, other countermeasures should be taken.
Gasket1pc. of Head/Quantity:Pair (for Left and Right) Moon shaped CamshaftPlug1.35×13.5 4 pieces required
When the Gasket/CamshaftPlug is replaced, use the original Bolt and make sure that the Bolt is penetrating to the bottom, otherwise this product may be inserted only halfway.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Bagus! BAGOSE Aluminum Seat Lock Plus for ZEPHYR750
It was a real itch that I could scratch, and I was able to fix it with MaterialUpgrading, a common problem with ZEPHYR. Thank you, BaGOOSE. View detail
Fits: KAWASAKI ZEPHYR750
Fitted to match RearWheel inch up
Originally, we were thinking of TireInch Up and 520Conversion by replacing the Wheel, so we replaced the Sprocket Cover.
It is very light compared to the OEM SPA ROCKETCover.
In addition, unlike the Covers of other manufacturers, ZEPHYR's long Shift rod is stable and the Shift operation feels good because of the Shift Support.
The appearance is also very refreshing around the Cover and the body looks tighter.
As for the cost, the cover, bolt, etc. are all made by Anodized, so they are very expensive. However, considering the lightness, sturdiness, and effectiveness of Shift Support, it is worth considering.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
I would like to install parts.
ZrX1200DAEG over RACING Sprocket Cover + ZX-14RRRelease + bremboRCSRadial master16Φ I used it for 2 days touring about 800km. The above combination did not cut the bike exactly, the GEAR did not go in well, the Neutral did not go in well, and there were many stops at traffic lights with the Clutch still in the grip. Since it was a bit stressful, we consulted with CharismaMechanic, our favorite shop, the next day. The next day, I consulted with CharismaMechanic at my favorite shop, and they told me that the thickness of this product is 3.0mm and OEM 2.5mm, … I switched back to OEM and the problem was easily solved. The product itself is not bad, but it's not a good product. The product itself is not bad. We hope this will be of some help to you. View detail
Easy to see with Simple
I had installed YOSHIMURA's Progress2 water temperature gauge because the OEM water temperature gauge did not give an accurate water temperature, but I wanted to fix it in a position where I could easily see it.
It is a simple construction, but the mounting frame is small enough to easily see the meter.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Recommended for OEM Replace
The OEM mounts are subject to uneven wear on the chain and sprocket due to wear on the engine and strain on the chain over time, so they were replaced as a countermeasure and as a dress-up.
Before the replacement, the Chain had a tendency to be quirky in the gnawing area, but it is now straight.
My car body still seemed to have a kinked Engine due to age.
The pure Normal Thread Screw was also rusted and seemed to have rattled, so I was glad to replace it this time.
I think it will be Plus in practical terms as well, since it can also dress-up and prevent kinkiness.
It is a bit expensive, but I thought it was better than buying OEM.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Easy
I am very happy with the look and feel of the product. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100
It came with an installation Instruction Manual, so I felt safe.
Was the one you received as per Image?
It was exactly as pictured.
Was the installation difficult?
Rear wheel, tank, and air cleaner box are difficult to remove and install.
Wiring is also quite troublesome
How was your experience with it?
Stylish and good around the Rear, great!
[Included Parts:were they on?
BaGOOSE's Sticker is Quantity:1pc.
[Was there anything that disappointed you?
In my case, the hose around the rear brake master interferes with the brake switch, so I just have to be careful to dodge it.
There is an Instruction Manual for installation, and if you have a Skill that can remove and install the wheel, you should be able to do so without any problems.
Since the Blinker and Tail lamp will also be removed, I think it would be a good idea to replace them as well.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Well made product.
I bought this because I changed my carburetor to a TMR, and it is an Exclusive Design, so it fits EXACTLY in the space where the Air Cleaner Unit was removed, and the oil catch tank can be laid out SMART, and the finish is great.
We asked our favorite Custom Shop to install the product, and they were impressed with the well-thought-out product without any particular difficulty.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1200DAEG
Too many gaps and no gaps
The product itself is where I would like the dimensions to be a little more in line with the body of the car.
There are many gaps at the top and sides of Battery
ConnectorQuantity at the bottom of the Fuel Tank:2pc. Set is the Quantity:2pc. Both sets cannot be installed in the OEM position and must be removed from the ConnectorHolder and connected via aerial wiring.
I wanted to PowerfulSpec. so I had no choice but to use it.
I'd trade for something else if I could find something better, but I'm not sure there's anything better out there.
View detail
A must for FCR Carburetor Body!
[How is it used?
Touring, city driving
I purchased this to fix the Idol Adjustment Wire on the FCR Carburetor Body.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy just to tie it to the Bolt on the Flow Chamber.
How was your experience with it?
Wire is well fixed and easy to use.
[Included Parts:were they on?
It is attached.
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
Thin Pull switch
I installed this switch on my zrx1200ZrX1200 DAEG. I could install the switch without thinking about the wiring, but I had to drill a 5mm hole in the handlebar to fix the switch in place. I put some paper tape on the handlebar and painted the protrusion of the switch and pressed it into position. View detail
The costumes are good
The product itself was installed without any problems, and there were no problems with the operation, making it a very good purchase. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
For Trouble Avoidance
Simply replacing the OEM plastic parts, which invariably crack, with aluminum will give you peace of mind! View detail
Everything is in the best balance!
I wonder about the 4,400 yen Gold amount difference with and without Emblem.
I dare to choose this one.
I'm not a fan of the bulky Silencer.
Size-wise, this feels just right.
The weld marks are also very clean and combined with an austere finish with no burnt color.
The overall impression is elegant and luxurious.
The volume is slightly large, but there is no crackling and the sound is pleasant to the ear.
The inner punching 50mm is more comfortable for engines tuned for high compression.
The volume is socially O, but it's not too loud.
We are also considering purchasing Silent for our vehicle inspections when we have more room in our budget.
View detail