Reviews
Just received this item within 4days. Well packaged and sealed. Item as described, no damage or whatsoever. Fast Shipping to Singapore! Will order from you guys again! Cheers!
Just received this item within 4days. Well packaged and sealed. Item as described, no damage or whatsoever. Fast Shipping to Singapore! Will order from you guys again! Cheers! View detail
The pure fender had jumped out for a long time, and since it was unfashionable, it exchanged. Since it is made from thicker aluminum, it seems to be strong. The backside of the car body felt it refreshed, the tire was greatly exposed, and after ex
The pure fender had jumped out for a long time, and since it was unfashionable, it exchanged.
Since it is made from thicker aluminum, it seems to be strong.
The backside of the car body felt it refreshed, the tire was greatly exposed, and after exchange gained in force.
However, although it is unavoidable, since the splashes raising by Hitoshi Oishi increases, a fine wound goes into a rear cowl or a tail light lens.
Moreover, since being irritated by attachment of an attached spacer and the reflector are options, they are four stars.
View detail
It is used in ZZR1100 C1. It attached with high-throttle-izing. Since the exclusive harness according to vehicle type was contained in the kit, there was no time and effort of troublesome wiring processing. About the specification of a switch,
It is used in ZZR1100 C1.
It attached with high-throttle-izing.
Since the exclusive harness according to vehicle type was contained in the kit, there was no time and effort of troublesome wiring processing.
About the specification of a switch, although it does not change that it is pure, texture thinks the kana which falls a little.
The after price of a difficulty is high.
View detail
Although it is used by a fender less kit and simultaneous wearing, it is solid without Brel. The form of the reflector is also very pleasing from the thing of the form of an ordinary rectangle.
Although it is used by a fender less kit and simultaneous wearing, it is solid without Brel.
The form of the reflector is also very pleasing from the thing of the form of an ordinary rectangle.
View detail
Since an authentic positive one was rugged and it was large, when using this, it became sharp touch shapely. It is a difficulty that a reflector and a two-sort sticker do not simply follow! There is no space which sticks the stay which moreover attach
Since an authentic positive one was rugged and it was large, when using this, it became sharp touch shapely.
It is a difficulty that a reflector and a two-sort sticker do not simply follow! There is no space which sticks the stay which moreover attaches a reflector, and a two-sort sticker.
That much [ although it is very pleasing / supposing it mentions the factor of a four-stars stop ].
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
I think that attachment difficulty is low. Although the adapters of a crimp is attached about wiring connection, I consider that it is more certain to have prepared the plug separately and to connect.
I think that attachment difficulty is low.
Although the adapters of a crimp is attached about wiring connection, I consider that it is more certain to have prepared the plug separately and to connect.
View detail
R was equipped with the fender less kit for WR250X. Although attachment was completed satisfactorily, since the location of a number is an object for motards, it has entered into the car-body side somewhat low. When a course run etc. are carried o
R was equipped with the fender less kit for WR250X.
Although attachment was completed satisfactorily, since the location of a number is an object for motards, it has entered into the car-body side somewhat low.
When a course run etc. are carried out by R, if Sas does a full stroke, it will certainly hit with a tire.
Although it will be an object for X and there is nothing -- If the mounting hole of a bracket is made into slot shape, the degree of freedom of angle adjustment will spread and I will think that it is better.
KIT for it and the harness connection of a number LGT does not get.
Since loose connection was likely to be woken up by vibration etc., he bought the usual plug terminal and it attached it.
The rigidity of attachment of a bracket with a thick board, etc. are carrying out quite firmly, and it is likely to be equal also to an off-road run.
It is pleasing so so.
View detail
Since the stay of the number plate was strong although the loading hook was lost when the thing with bright LED of the number LGT which the circumference of rear one felt refreshed and has satisfied was also made into the good fender less, it was able to
Since the stay of the number plate was strong although the loading hook was lost when the thing with bright LED of the number LGT which the circumference of rear one felt refreshed and has satisfied was also made into the good fender less, it was able to substitute there. View detail
Fits: YAMAHA TZR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA FZR250
Other vehicles are followed and it is the 2nd purchase. He admired the merit of accuracy again, without feeling the necessity for Sim for adjustment being the same as that of last time. It is a recommend in the direction which attaches greater imp
Other vehicles are followed and it is the 2nd purchase.
He admired the merit of accuracy again, without feeling the necessity for Sim for adjustment being the same as that of last time.
It is a recommend in the direction which attaches greater importance than to design texture to a function.
View detail
Although it wanted from before, it was high and was not able to take out a hand. It purchased at last and attached by itself. Although notes were performed supporting a rear stand and an engine block with a jack, since two spacer collars are conta
Although it wanted from before, it was high and was not able to take out a hand.
It purchased at last and attached by itself.
Although notes were performed supporting a rear stand and an engine block with a jack, since two spacer collars are contained on the way, if it does not take care about the stud bolt of a rear upper engine, it will be caught in it, and a bolt does not go into it.
Although it has equipped with the skid pad of an after moriwaki, since it hit delicately in my 08REVO, the washer of two sheets was made to blow below a front engine hanger bolt, and I have avoided.
The dress-up of the circumference of an engine up was completed now.
View detail
Fits: その他 Vehicles under 125cc
It attached to the fender less made from A-TECH by D-tracker125. By exactly, the just fit is carried out to the width of the fender less. It seems that reinforcement was worrisome since the fender less was FRP, but it is satisfactory. When the
It attached to the fender less made from A-TECH by D-tracker125.
By exactly, the just fit is carried out to the width of the fender less.
It seems that reinforcement was worrisome since the fender less was FRP, but it is satisfactory.
When the carrier was loaded with the load, the visibility of the normal blinker was worrisome, but it is problem solving by this blinker.
Attachment was not so difficult, either and it carried out it to the extent that it worried about management of wiring.
View detail
Fits: SUZUKI GSX-R600, SUZUKI B-KING, TRIUMPH DAYTONA 675, KAWASAKI ZX-6R
Texture is very good touch. I think that a design is also good. Meat omission is carried out to good touch, and it is light. We can also perform fine adjustment of a lever and it is recommended. A lever good for nisshin wide use otherwise
Texture is very good touch.
I think that a design is also good.
Meat omission is carried out to good touch, and it is light.
We can also perform fine adjustment of a lever and it is recommended.
A lever good for nisshin wide use otherwise is not found.
Although a price is felt somewhat high, is it satisfactory well?
View detail
It is the factor which chose out of the other company here in that Black can choose color by the product made from a stainless. Although the hose and the banjo were selected for the first time, it has equipped satisfactorily. I attach by myself an
It is the factor which chose out of the other company here in that Black can choose color by the product made from a stainless.
Although the hose and the banjo were selected for the first time, it has equipped satisfactorily.
I attach by myself and feel that the meaning of the name a buildaline understood a few.
View detail
By management of a pure hose, it had become a situation where a gas tank and a hose interfered and it did not go out a handle to the limit, with clutch master exchange. Whenever [ this / 45 ], it twisted, and it could come out, interference could be a
By management of a pure hose, it had become a situation where a gas tank and a hose interfered and it did not go out a handle to the limit, with clutch master exchange.
Whenever [ this / 45 ], it twisted, and it could come out, interference could be avoided exquisitely, and it is very much satisfied.
View detail
It is used for CB1000SF. Since the pure rubber was lost unawares, the vinyl tape was stopped and substituted for the rubber tube of a bicycle, but when mesh-hose-izing, it used in the article store, having discovered this. It is the touch which ap
It is used for CB1000SF.
Since the pure rubber was lost unawares, the vinyl tape was stopped and substituted for the rubber tube of a bicycle, but when mesh-hose-izing, it used in the article store, having discovered this.
It is the touch which appearance may feel refreshed.
View detail
It is a 45-degree type banjo. It is said that about 25-mm hose length will become long if a nest is carried out to hose fitting.
It is a 45-degree type banjo.
It is said that about 25-mm hose length will become long if a nest is carried out to hose fitting.
View detail
Since CBR929RR was fender-less-ized, the reflector needed to be prepared for according to. Then, this kit was attached. Since attachment is also easy and appearance is also smart, it is satisfied.
Since CBR929RR was fender-less-ized, the reflector needed to be prepared for according to.
Then, this kit was attached.
Since attachment is also easy and appearance is also smart, it is satisfied.
View detail
It was pure, and since SABISABI was attached at iron, it exchanged in passing. Since it is a manufacturer who structure is also solid truly and can trust it, he has no complaint. The washer of aluminum was also attached and was saved.
It was pure, and since SABISABI was attached at iron, it exchanged in passing.
Since it is a manufacturer who structure is also solid truly and can trust it, he has no complaint.
The washer of aluminum was also attached and was saved.
View detail
A pure twist blinker portion comes upwards for a while. Probably, it will be good since a number plate also leaps up. However, it may have trouble [ attachment ] a little. since -- it is a three stars (^.^)
A pure twist blinker portion comes upwards for a while.
Probably, it will be good since a number plate also leaps up.
However, it may have trouble [ attachment ] a little.
since -- it is a three stars (^.^)
View detail
Although written on the 2-stroke racing handbook, w appearance it will seemingly be better to exchange for the promotion of efficiency of air-bleeding work is also good, and I think if it escapes also from the exhaust air which was not able to finish esca
Although written on the 2-stroke racing handbook, w appearance it will seemingly be better to exchange for the promotion of efficiency of air-bleeding work is also good, and I think if it escapes also from the exhaust air which was not able to finish escaping from Kon since the caliper and master cylinder side carried out air-bleeding in both.
It is appearance serious consideration.
View detail