Reviews
The combination of a color with a banjo bolt and a hose cannot be said not at all, but it is beautiful. The recommend of the simultaneous purchase of a banjo bolt and a hose is carried out.
The combination of a color with a banjo bolt and a hose cannot be said not at all, but it is beautiful.
The recommend of the simultaneous purchase of a banjo bolt and a hose is carried out.
View detail
Since the price also puts into practice those with a hole being handy and for wire locks, and the weight saving of a hexagon-head head, it is recommended. But it is although weight does not necessarily have a difference so much since it is a product m
Since the price also puts into practice those with a hole being handy and for wire locks, and the weight saving of a hexagon-head head, it is recommended.
But it is although weight does not necessarily have a difference so much since it is a product made from aluminum (sweat).
View detail
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter -- Product number : The B593-03CBK, wide use, and angle:20-degree color:Black raw material:stain
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter --
Product number : The B593-03CBK, wide use, and angle:20-degree color:Black raw material:stainless and a good ridge:GOODRIDGE washer (product made from an active),
product number: -- 20998004, wide use, and size:1 mm thickness / inside diameter:10mm raw material: -- number [ of entering copper ]: -- 4 was purchased.
[Attachment of goods] The pure banjo of -KLX250 (~07) is the special thing of turning the bottom of a caliper with a metal tube from the fork guard lower part, and bringing to a banjo bolt.
- When using a common banjo, even if 20 degrees is any, since the junction of a banjo adapters and a hose will come out outside from a caliper if the sag direction is brought to the before [ vehicles ] side, 45 degrees of hose or banjo adapterses will be immediately damaged at the time of a fall to an off run.
- Therefore, it sees from before and 45 degrees can connect with a hose inside a caliper, if 20 degrees of the sag direction is brought to the vehicles rear side by which banjo adapters.
However, at 45 degrees, management of a hose becomes quite forcing and die length is also needed.
- By a straight banjo adapters, since a terminal area with a hose hits with a caliper, a connection section will come out to the outside of a caliper after all again.
- The only pattern is a pattern which brings the sag direction for a 20-degree banjo adapters to the vehicles rear.
(Refer to photograph) - even if it falls in off now, a connection section is protected by the caliper and breakage can be prevented.
[Grading of goods] Although many things were tried as a mount to -KLX as above-mentioned, it is a 20-degree banjo adapters ordinary as goods.
- By an off vehicle, I think that the stainless banjo adapters which is not aluminum too like this product, and a bolt are indispensable since there is a risk of a fall on a path through a wood etc.
Since it is ordinarily good as goods, it is considered as a three stars.
View detail
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter -- product number: -- B594-03CBK, wide use, and angle:45 degree color:Black raw material: -- the
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter --
product number: -- B594-03CBK, wide use, and angle:45 degree color:Black raw material: -- the stainless and good ridge: -- a GOODRIDGE washer (product made from an active) --
Product number: 20998004, wide use, size:1 mm thickness / inside diameter:10mm raw material:copper The number of entering: 4 was purchased.
[Attachment of goods] The - authentic positive front reservoir side banjo adapters has brought sag to the tail side at 20 degrees.
- Although fitting of the hose was carried out this time, in order that a hose might wear to instruments, such as a meter, a little, in the pure banjo angle and the sag direction, the sag was brought to the front side by a 45-degree banjo adapters.
- A hose does not wear to instruments now.
[grading of goods] - it is ordinarily good.
Considering a fall risk, by an off vehicle, a stainless with reinforcement is good.
It is considered as a three stars.
View detail
Fits: KAWASAKI BALIUSII, KAWASAKI ZZR1200, KAWASAKI ZZR1100D, KAWASAKI ZX-11D, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja 400, KAWASAKI Ninja 250R, KAWASAKI Ninja250
ZRX1200DAEG was equipped. When it attached to a former zephyr etc., although it missed something and moved to the handle, it was on it, but in ZRX1200, they are goods which may be satisfactory and for which the degree of fixation may be preeminent.
ZRX1200DAEG was equipped.
When it attached to a former zephyr etc., although it missed something and moved to the handle, it was on it, but in ZRX1200, they are goods which may be satisfactory and for which the degree of fixation may be preeminent.
View detail
A wearing easy ! trapezoid is good! It is also stopped by the uniformed patrol officer only by don't be absorbed...
A wearing easy ! trapezoid is good! It is also stopped by the uniformed patrol officer only by don't be absorbed... View detail
A motorcycle is NSR250. It used in combination with the radial pump of a daytona. Since it is exchanging for the external hose, this adapters of 90 degrees is super-convenience, and it can arrange it, without applying CHIKARA with a hose impossibl
A motorcycle is NSR250.
It used in combination with the radial pump of a daytona.
Since it is exchanging for the external hose, this adapters of 90 degrees is super-convenience, and it can arrange it, without applying CHIKARA with a hose impossible for.
although the lineup of the product made from aluminum is carried out also from the earls, the product made from aluminum tends to attach a wound to fitting -- torque management cotton -- it is how.
Although it is slightly expensive, the stainless of a good ridge is quite a recommend.
View detail
Since a pure big rear fender was not pleasing, it exchanged!! v from which the circumference of rear one felt it refreshed now, and the number LGT was also set to LED (~繝ｼ~) v
Since a pure big rear fender was not pleasing, it exchanged!! v from which the circumference of rear one felt it refreshed now, and the number LGT was also set to LED (~繝ｼ~) v View detail
In attaching the round oil cooler of 91 model GSX R750, components were arranged. If it is a line of #8 as compared with the normal oil hose of R750/1100, it will get cold considerably. From a normal hose, it falls generally [ about ten minuses ].
In attaching the round oil cooler of 91 model GSX R750, components were arranged.
If it is a line of #8 as compared with the normal oil hose of R750/1100, it will get cold considerably.
From a normal hose, it falls generally [ about ten minuses ].
since it is overcool in case of winter, an oil cooler must be covered, but if it comes out good and is peevish exactly in case of summer, and it is *#6 and the run near normal which felt, came out and probably did its best will be carried out, an oil temperature will exceed 120 degrees.
# It is also CHIRAHORA that 8 will approach 120 degrees if careless about the tropical day.
Although I think that a general total balance is #6, there is no situation plug force.
Although a man is a match in #10, the balance of appearance and practical use is #8.
View detail
The main repair parts of the buildaline (a stainless clear hose and#20671370) of W650 are three kinds, a banjo bolt, a banjo, and a washer. (1) banjo bolt for W650 (the hexagon-head opposite side becomes a banjo bolt of a pitch 1.25 at 14 mm.) The mas
The main repair parts of the buildaline (a stainless clear hose and#20671370) of W650 are three kinds, a banjo bolt, a banjo, and a washer.
(1) banjo bolt for W650 (the hexagon-head opposite side becomes a banjo bolt of a pitch 1.25 at 14 mm.) The master cylinder side : #992-03-32C The brakes caliper side : #992-03-32C (2)
banjo for W650 The master cylinder side :
# B592-03C (straight) (inside diameter phi10mm outside-diameter phi14mm[actual size phi14.0~14.7mm]) Brakes caliper side: #B593-03C ((20 degrees)3) Washer for W650 (four-sheet set)
1 mm in thickness Comparing with the make of #20997004 other company, the banjo bolt of a buildaline is a compact!!
That is, a lightweight design is the predominancy of a buildaline.
Moreover, it is also possible to newly replace the following parts and to aim at the original customization without compromise!! Good ridge of a buildaline!!
It is very recommendation!!
...................................................
The banjo bolt of aluminum is four kinds.
Blue: #14992511 Red: #14992512 Silver: #14992514 Gun meta: The banjo bolt of #14992516 stainless is two kinds.
base -- finishing: #992-03-32C Black plating: #992-03-32CBK
...................................................
As for the banjo of aluminum, only one kind of blue is.
Master cylinder side: #20509904 (straight) Brakes caliper side: #20509906 A stainless (20 degrees) banjo is two kinds.
base -- finishing: -- the master cylinder side : #B592-03C
(Straight) Brakes caliper side: #B593-03C black (20 degrees) plating: Master cylinder side: #B592-03CBK The brakes caliper (straight) side : #B593-03CBK (20 degrees)
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Since attachment had a description, it was not difficult, but it took time. It cannot work, unless it also has the tool as it is. It is good to be able to carry out the pure appropriation of a blinker and the number LGT. It is good touch altho
Since attachment had a description, it was not difficult, but it took time.
It cannot work, unless it also has the tool as it is.
It is good to be able to carry out the pure appropriation of a blinker and the number LGT.
It is good touch although he used the number plate holder of DRC.
However, unless it is those who are interested in a motorcycle in the case of CB400, the difference between a fender less and normal may not be known.
View detail
It was felt refreshed and the parenthesis became good. If LED becomes it is bright and dark, a number is conspicuous awfully.
It was felt refreshed and the parenthesis became good.
If LED becomes it is bright and dark, a number is conspicuous awfully.
View detail
It is pleasing with how depending on which a number extends far back, and an angle. It is small to the extent that it is not known, unless it looks into an LED number LGT. Since it is 18-inch correspondence, a useful load does not change, but it i
It is pleasing with how depending on which a number extends far back, and an angle.
It is small to the extent that it is not known, unless it looks into an LED number LGT.
Since it is 18-inch correspondence, a useful load does not change, but it is touch called the product made from an active truly, without taking pains also over attachment.
View detail
A reflector may be special if a fender less is used. Be sure to attach! It may be before stopped by the police. Since this was cheap also in price, it was purchased. However, if the number plate is attached to this while using it for a one cyl
A reflector may be special if a fender less is used.
Be sure to attach! It may be before stopped by the police.
Since this was cheap also in price, it was purchased.
However, if the number plate is attached to this while using it for a one cylinder motorcycle before, the number will have broken probably because of vibration.
Therefore, I consider the cover of a number plate as it is better to attach together.
View detail
It is used at the time of brake fluid exchange. The price of merit is cheap above all. Although the tube was shorter, it did not have a problem especially in work. If a pump is pulled with not much sufficient vigor, packing is slippery and wil
It is used at the time of brake fluid exchange.
The price of merit is cheap above all.
Although the tube was shorter, it did not have a problem especially in work.
If a pump is pulled with not much sufficient vigor, packing is slippery and will swing wide.
It is a size exactly good using one hand.
View detail
It is attachment at XANTHUS. Exclusive elegance was regarded as wiring processing of a general-purpose article being managed since it is high, and purchased. Although it becomes empty since it says or there is no object for xan, as for the goods h
It is attachment at XANTHUS.
Exclusive elegance was regarded as wiring processing of a general-purpose article being managed since it is high, and purchased.
Although it becomes empty since it says or there is no object for xan, as for the goods here, the coupler of connection (smile) is a scalpel type.
Since an authentic positive one having been a male and a connector omission substitute were not completed, wiring was cut and they connected.
It also considered returning pure once and made connection the plug.
Moreover, since XANTHUS was always lighting, the kiln of the relay is carried out and it was made ON-OFF [ + wiring by the side of LO beam ].
As goods, it is what may be conjointly made dramatically into the refreshing also with the high throttle.
Wiring processing requires a wiring diagram etc.
Since I thought it serious to do individually very much, it was referred to as *3.
View detail
It is a smart banjo bolt like a contribution picture. Although he bought a cheap disk-ized kit, the fluid has leaked from the crevice between a banjo bolt and a washer. Therefore, the goods here were purchased and replaced. Also efficiently th
It is a smart banjo bolt like a contribution picture.
Although he bought a cheap disk-ized kit, the fluid has leaked from the crevice between a banjo bolt and a washer.
Therefore, the goods here were purchased and replaced.
Also efficiently the satisfactory bolt head deleted, it is crowded, and a parenthesis is good.
View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYR400X, KAWASAKI GPZ900R
Before carrying out a specification change, support of the other company was used, but as for the product made from ACTIVE, structure is solid and fitting also went to the smooth.
Before carrying out a specification change, support of the other company was used, but as for the product made from ACTIVE, structure is solid and fitting also went to the smooth. View detail
It was the first charm point that the kill switch was attached. finishing from other things -- admiration -- it is not quite satisfactory. Wiring needs a drilling process for a handle at bolt on.
It was the first charm point that the kill switch was attached.
finishing from other things -- admiration -- it is not quite satisfactory.
Wiring needs a drilling process for a handle at bolt on.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Since it is a product made from aluminum, compared with the product of the other company, it is a little heavy, but the part reinforcement has sense of security. Attachment is also easy at an exclusive design. A price is also cheap and perfect for
Since it is a product made from aluminum, compared with the product of the other company, it is a little heavy, but the part reinforcement has sense of security.
Attachment is also easy at an exclusive design.
A price is also cheap and perfect for the tail cowl in which looks are also felt refreshed and CB leaped up.
View detail