Reviews
I wanted a Size notation.
I bought it to use for bremboRear caliper center out, but the bolt size was for M10.
RearCaliper bolt cannot be used because it is M8.
There is no Manufacturer notation, only thickness, and I would like to see at least Bolt diameter indicated.
It is now in the collection of Parts.
View detail
Olive for Stainless Banjo Adapter
Olive for Stainless Banjo Adapter
The Taper angle is a little different than the normal Adapter, so I thought it would be better to assemble it with a solid Adapter for Stainless Steel.
Small things, but it's better to replace them properly and ride with peace of mind.
Especially since it's Brake.
View detail
A necessity for driving on public roads.
Brake switch required when using Racing radialMASTER on public roads.
It requires dexterity and subtle adjustments to install small parts, and you must be able to devise a way to use the device when it does not work well due to individual differences.
Since it is a Mechanical Switch, if it is attached properly, the Brake will turn on without fail and there is no discomfort in lever operation.
View detail
They are those with a problem to a sales method. Only the cap which the actual thing differs from a photograph and cannot fix actual goods to a breeder. expecting the goods of a photograph -- I have you -- it is regrettable. The photograph of
They are those with a problem to a sales method.
Only the cap which the actual thing differs from a photograph and cannot fix actual goods to a breeder.
expecting the goods of a photograph -- I have you -- it is regrettable.
The photograph of goods should publish the same thing.
View detail
In the neighboring store, since products offered were not good, an order was more mostly placed for the reserve.
In the neighboring store, since products offered were not good, an order was more mostly placed for the reserve. View detail
It changed between bolt pitches. It was not noticed, but it became HAME which breaks, masters and buys Linda for fastening forcibly. I thought that what was necessary was just to have purchased the bolt of the smile stainless. (It was obsessed
It changed between bolt pitches.
It was not noticed, but it became HAME which breaks, masters and buys Linda for fastening forcibly.
I thought that what was necessary was just to have purchased the bolt of the smile stainless.
(It was obsessed with appearance.) I think that it is cheap well and they are good goods.
View detail
The functions are satisfactory. But it is expensive.
This product was chosen to replace an OEM that deteriorated and was lost at some point.
I was able to install it with no problems. After installation, I sprayed water and blew the surface before taking the Cap off, but the inside is not wet and there are no performance problems.
However, it is expensive...what is the price for one piece? For example, Quantity:It would be helpful if you could drop the price per item more, such as 1 Set of 10pcs.
View detail
Banjo bolt as expected!
It is an ordinary Banjo bolt.
This time I wanted to keep the Caliper surroundings in Black and Silver, so I went with Black for the banjo bolt!
After installation, I'm very pleased, especially since the Fluid isn't leaking out!
View detail
Replaced 3 times in 5 years
Cycle to break was 2 years last time, 2 years last time, 6 months this time.
This time, we also have a spare Quantity:2pc. Buy Set
Rear Brake Switch defective at vehicle inspection.
Lousy thing to realize when it is pointed out to you.
Durability depends on Rose.
indescribable (esp. indescribably beautiful)
I thought it would be better than the less than 2000 Chinese
I keep using it.
I need to check it often.
You're wasting your day.
View detail
I need an air vent.
If the air is not snapped when the Brake is bleed off, it is air remaining in the Master Cylinder. I tap it lightly, but it does not refreshing. It will eventually bleed out. It would be best to have an air bleeder. Also, the price is too expensive. This time, I used DAYTONA's Brake hose.:2pcHose slightly contact. View detail
Along with Hose Replacement
The Hose was replaced along with it.
The Hose part was Red, so we installed Blue here.
The color is nice, but you have to be careful not to overtighten or lick the corners when tightening so that the color doesn't peel off.
View detail
exchange
BrakeMaintenance:Replaced together with field replacement. Since it is a consumable item, it is replaced periodically.:It's good that they are sold in sets. However, even if there are many of them, the selling price remains the same. View detail
Fits: YAMAHA XJR400S, YAMAHA XJR400, YAMAHA TZR250, YAMAHA T MAX, YAMAHA SRX600, YAMAHA RZ350RR, YAMAHA SRX400, YAMAHA RZ250RR, YAMAHA FZX750, YAMAHA RZ250R, YAMAHA FZX750, YAMAHA FZR400RR SP, YAMAHA FZ-6N, YAMAHA FZ6-S FAZER, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA R1-Z
RZ Caliper support
Front forkTZr on RZ250 (3ma) I purchased this product to equip a Brembo caliper to a vehicle of
The texture is good and fitting is no problem.
I think it looks good with the meat removed.
View detail
A little disappointing
It is possible to install it like OEM. it is used for the front OUT side, the hole for the block fixation can only be installed in Small and SmallNut, and the use of Bolt is forsaken and fixed with Band, because Line comes to the center, I guess that Large hole cannot be processed. If there is a female screw on the frame side, there will be no problem. View detail
protection
I bought more brake hoses to protect the hose in the clamp area.
I thought it was expensive for the price per 1pc.
I had a hard time to pass the hose.
View detail
color coordination
Brake hose color is replaced to match.
I'm not sure if this is a good idea or not, but it's a good idea. I'm not sure if I can help it.
View detail
Brake hose protection
I bought this to protect my Brake hose when I replaced it.
It's hard to put in, and the selling price is a little high, but I couldn't find anything better, so I just put it on and see what happens.
View detail
Straight
The brake cylinder is changed back to NORMAL, and the brake hose is changed to Straight Type in order to use it.
Stainless blackThey look good, but the price is a bit steep;
Quantity:2pc. If it's a Set purchase, it's worth it.
View detail
Fits: YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250 C, YAMAHA MAJESTY250, YAMAHA MAJESTY125, YAMAHA MAXAM
This is a different Type product from the picture
I have no problem installing it.
The installation method of the Type is different from the image.
View detail
differently coloured
I bought Black last time, so this time Color:I bought Yellow.
After all, it is Small Sakai, and it is delicate in price.
The Material is also hard, so it might crack. I hope they make it the same Material as the one on the Brake hose.
View detail