Reviews
Fits: HONDA Integra 700, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X
Solid construction.
I purchased this product to install a rear box and it is very solid and secure.
Furthermore, thanks to the large grips, the handling of the motorcycle has become much easier.
However, since it is a replacement for the OEM bar, the gap between the Rear Sets and Rear Fender will be fully visible, but this is recommended for those who value functionality over appearance.
Also, the Hinge (a bar supporting the opened Rear Sets) is removed during installation, and care must be taken not to drop the small parts when doing so.
View detail
Lowdown Bracket
The seat is now lower.
Position seems to be a bit ahead of its time.
If you are particular, you may need to consider changing Seat.
I like it.
View detail
Lowdown Bracket・・
I still felt a sense of inclination compared to NORMAL, but I got used to it after about 15 minutes.
The Motorcycle Style has improved.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey 125
Satisfied with Cospa
Satisfied with the cosmetics compared to other Catch tanks.
I felt it would be better if there was some processing such as changing the length of the Pipe in the Catch tank.
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR250R (2011-)
cheap
It's cheap, it works, and it doesn't look fancy, so it's good.
Note that you may need a spring compressor to replace the spring.
View detail
Power connection Kit!
I bought this to make it easier to add more electrical components. The way to connect it is to connect it to the Battery and then to the Attachment, but you need to use Tester to find out which one is connected to the Attachment. You need to use the Tester to find out which one is connected to the Attachment, and whether the 12Bolt is coming from the key On state. I was worried about this part, so I asked a knowledgeable friend (a mechanic) to help me. I think people like me who have never done this before are worried. If you have never done this before, you may be worried.
The other thing to keep in mind is that the size of the product is a little large, so it will take up a lot of space.
For myself, I don't think I'll need Sub harness for a while.
View detail
Good that it can be done in a simple way.
It is easy to install, just replace with OEM, and it improves the footing to a certain extent.
I changed it at the same time as I changed Seat, so I could feel the effect more.
However, simply because the seat front is lowered, you will feel slightly pinched forward.
Overall, I think it is satisfactory.
View detail
Fits: HONDA MSX125SF, MSX125, GROM(16.6-) [EBJ-JC61], GROM(13.6-16.6) [EBL-JC61, HONDA MSX125SF, MSX125, GROM(16.6-) [EBJ-JC61], GROM(13.6-16.6) [EBL-JC61
It comes on without any processing
I was able to install it without any modification.
The paint quality is not bad and Material:Because it is not aluminum, it is less likely to crack due to vibration, even on single-cylinder Motorcycles.
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM
The Instruction Manual is sketchy, so a certain amount of Skill is necessary.
Purchased because it is cheaper than OEM.
Like the Service Manual, the Instruction Manual only gives a brief description of how to assemble the Plate, so be careful.
There is no reverse side of the plate, but if the Outer, Clutch center, and Pressure plate are not assembled correctly when fitting, it may cause slippage. This is a job that requires experience.
View detail
Looks good to me.
[How is it used?
It's nice to cut the wind.
Was the one you received as per Image?
Street Image
Was the installation difficult?
There was no Instruction Manual, so I was a little worried.
How was your experience with it?
Custom look
[Included Parts:were they on?
It comes with Bolt and Bracket
[Was there anything that disappointed you?
I want the Instruction Manual to come with it, just a sheet of paper.
Other items that would be helpful
No Instruction Manual/Request Instruction Manual is attached.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
Good
The body of the car is black [Color] I bought Smoke because I thought it would look good on me.
I thought about LED etc., but I thought that it was easy first of all rather than changing High flasher measures and Wiring, and made Smoked lens exchange.
I loved how tight it looked.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125S, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA LEAD125, HONDA Sh MODE
I've lightened it up.
[How is it used?
PCX125 (JF28) It is being used and replaced together with the undercarriage refurbishment of
When I checked the Weight Roller before replacement, it was slightly worn out. The mileage was about 20,000km.
How was your experience with it?
I changed it from OEM 18g to 15g.
You can't overdo it, but I've heard that lightening it improves acceleration.
How did it compare to other products?
I lightened the weight, and as I heard, I think the Response is improved and the acceleration feeling is a little better. On the other hand, there is a story that the growth of the high speed range becomes worse, but it is not a problem at all for the use of the public road.
Also, if I could afford Gold, I would have loved to try DoctorPulley.
[Points to note]
As it happens, don't make a mistake in the direction when installing.
Other items that would be helpful
Items to buy together
→ It's not expensive, so you should also buy Weight RollerGrease.
View detail
I recommend it!
I bought it for winter protection, and I like the plating color of the brackets. I bought the Universal Knuckle Visor for the difference since it was cheaper than the other company's. Combined with the Leg shield, I have a Full CowlSpec. The effect is quite good. The effect is quite good, and the way the wind hits my chin down is completely different. I also have an Off car and a NAKED, but since the weather has gotten colder, I've been riding the CUB exclusively. It's not too difficult to install and it only takes about 30 minutes. I recommend it. View detail
Endurance Helmet holder
When the carrier of Mr. Endurance is attached to KATANA, because it interferes and cannot be attached with the holder of the other company which was attached until now, if Helmet holder is necessary, it becomes this one choice.
The bolt between the Holder and the Bracket is a little short, so I'll change it to a proper bolt when I do the one-key conversion later.
I gave it three stars because the Bolt length is not enough and I wanted the Nut to be welded to the Bracket.
Also, the Tandem step holder is screw locked, so you will need a good tool to install it.
View detail
You'll have better footing.
Was the one you received as per Image?
Yes
Was the installation difficult?
Just replace with OEM, nothing to remove from OEMSeat.
How was your experience with it?
Is it the Lowdown Seat? It's got better footing.
You can sit pretty far back, so I think you have a lot of flexibility in positioning.
[Was there anything that disappointed you?
It's soft to the touch, but when you're touring, your butt will start to hurt pretty quickly. (From OEM)
View detail
Fits: HONDA glom, HONDA CBR250R (2011-), HONDA SUPER CUB110PRO, HONDA CBR250R (2011-), HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04), HONDA CROSSCUB , HONDA CB250F
I bought it because it was cheaper than other companies ... (laughs)
oh! "lid" So, only the appearance is changed. Is the performance not related first?
I chose this one because it doesn't have any noticeable color on it and I thought it would be nice to be able to remove it with a regular handheld tool. (This is a part that an amateur would never be able to open... lol)
OEM and other company's wrenches use 8mm to 12mm and large hexagonal wrenches (6mm is the largest for cheap hexagonal wrench sets), but this product can use a regular spanner (if you try to loosen it with the middle hexagonal wrench, the quantity:(This product which is 1 Set of 2pcs. will be disassembled...sweat).
Also, it was about $1,600 cheaper than another company (sp), so I went with this one! (LOL).
View detail
Stylish with compact size
[How is it used?
I installed it on my CUB for commuting. I chose this one because I did not want the wind resistance when driving as much as the splendid Windshield, and the small size Type was good.
I'd like to add a watch and a smartphone holder, so the bracket is Quantity:It was also a Point that it was a Set.
Was the one you received as per Image?
It was exactly as pictured on the listing! Once installed, the CUB looked Refreshing.
Was the installation difficult?
The Handling Instructions Manual can be downloaded by reading the QR code, so it was easy to do while checking it with a smartphone at hand.
The screw of the mirror of the CUB was large strange, and it might have taken time to take out the screw.
How was your experience with it?
I ride it every day and it's good enough for less than 5k miles each way.
[Included Parts:were they on?
VisorBody, Bracket and Screw only.
The rest came with a QR code printed on a piece of paper.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Use good tools! The screw of CUB was too hard and I almost licked it.
(I ended up running to a motorcycle shop to loosen it up...)
View detail
Fits: HONDA FORZA Si, HONDA ADV150, HONDA MONKEY125, HONDA MONKEY125, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX e:HEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
One point custom
Small Tunings were done. It is a beautiful blue and the parenthesis goodness is improved.
One thing I noticed is that it is quite light compared to the OEM.
The other thing to install is the Driver
View detail
Fits: HONDA FORZA Si, HONDA ADV150, HONDA MONKEY125, HONDA MONKEY125, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX e:HEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
Good color.
OEM is Silver and it is huge. I bought it for dress-up in color but it leaves a 5mm gap on the PCX HEV. I changed it back if I didn't like it lol.
I was very happy with the OEM Large size and the Large color.
Well, it's a dress-up, so if you think it's SMART and has color, it's beautiful.
View detail
Fits: HONDA VTR-F, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA VTR250, HONDA VTR250, HONDA VTR-F, HONDA VTR TypeLD
It is quite good.
I installed it on my 2021 CB400SF.
The angle of the notch on the front side of the bolt is not quite right, so I had to do some simple modification (pinch it with Pliers, tear it off and adjust it with File). the angle of the notch on the rear side is OK.
And I made a female screw with Tap (M4) just in case the hole for Bolt stopper is broken.
There is no mention of the above in the instruction manual, so please refer to it.
The amount of light falls a little compared with NORMAL, but I think that it is not a problem. I do not know whether it is OK at the time of the car inspection.
It's pretty good Parenthesis!
View detail