Reviews
Attach to KSR 110
It is compatible with Z125 PRO, but KSR 110 (2013) Since the engine shape is almost the same, I purchased it by stepping on the Large durable and installed it.
Results can be installed without any problems, and both performance and appearance are satisfied.
The reason for purchasing was to change the carburetor to Mukawa river VM 26, because it no longer uses OEM's Air Cleaner Box and Oil catch tank is required separately.
Because KSR 110 exclusive goods were not quite so, I tried buying it with no good but it was good.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, HONDA CB250R, HONDA CB125R, HONDA CB125R, HONDA CB400SF, HONDA CB400F, HONDA CBR250R, HONDA CBR250R, HONDA GROM, HONDA GROM, HONDA CB400SB, HONDA CBR400R, HONDA CBR400R
Because evaluation was not reflected
I will post the evaluation again.
There was some play in the installation, but if you do not mind it is the error range.
The price is also affordable and Reasonable if it is from the same shape product of other Manufacturer.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA VTR250-F, HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CBR250R, HONDA CBR250R, HONDA CB400F, HONDA CB400SF, HONDA CB400SB, HONDA CBR400R, HONDA CBR400R
The price is somewhat higher
Although it is cheap from other Manufacturers, is it good even for a cheaper commodity?
Installation is almost Bolt On, but between the mounting bracket and the footpeg body of the car body,
Because there was some play, I stopped play by holding Dry Carbon Seat in between.
It is possible to adjust the feel of footpeg and Change Pedal & Brake pedal,
You can fine-tune the height of footpeg and also decide the Riding position.
The appearance of the footpeg itself is better than the OEM's with a metallic feeling..
In the manual, Quantity : Pair (for Left and Right) Although there is description that there is another, the actual thing is Quantity : Pair (for Left and Right) Because it was the same thing,
I think that it is better to improve this point.
View detail
Good Carrier
Before being delivered this is the thing I was planning to wear, this was the first thing I wore.
Mounting, Tandem Footpeg installation Bolt stuck for 1 hour, but I could not remove it by myself so I brought it to Motorcycle shop, I gave him a fee high, but I appreciate it thoughtfully accepted.
Since I ride a motorcycle everyday, I have to carry a winged feather by all means, I put it in the Tandem seat in the R400RV which I was riding the previous time, but the GSX 250R does not have the load under the Seat under the recent recent Motorcycle in general So, I would like to use Compact sheet bag but Tandem seat chooses Carrier to open for when I have to put on something luggage.
Among various things, Seat is totally free, we have chosen this product with a flat Flat.
Although the Frame extending from the Tandem FootpegBracket itself is universal, it is just a Pipe frame, so it is good to wear a Helmet holder but I do not have a hook when putting on a luggage, so I'm thinking I should wear a Helmet holder also for Right I will.
Later, when thinking about Fender Eliminator, you can only install items of the same Endurance if you keep this Carrier attached.
The fixation behind Carrier is to attach Bracket to the base of Rear Fender, so if you are a third-party Fender Eliminator you can not wear it together.
Well, as wearing a carrier is said to be heavier, the driving wheel grip will be better but Motorcycle will accelerate and the maximum speed will fall, the stability will increase.
Carrier itself is a thing going Large changeable satisfaction design, strength and functionally, shibushima.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
It can not be used for Dorareko
Although I was using Stem Mount, I did not want to change the direction every time I cut the Handlebar and changed it to here. There is a terrible blur because the board that supports Mount is thin. Although it can be used except for dorareko, I think that there is a possibility that Nut may bend because of blur, but now I am wearing another company's Bracket. Those of other companies have diverted this because Size of Nut does not match, but there is almost no blurring. View detail
I also have a firm appearance.
I was looking at various Manufacturer products in order to attach Box to Z125pro, but I made a purchase because the making was solid. Installation was also difficult and could be installed in a short time.
However, although Bolt is the same color as Bracket, it was regrettable that Nut was Silver. I recommend you to prepare the same color Nut before installing.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155
It is a good item
It looks pretty good from monotonous Black's OEMLever.
Easy to exchange and compare favorably with the position of OEMLever, the shape has some corners, but it is also rounded
You can use it without discomfort.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155
I think that it is a good product
In the Brake lever which does not need Adjuster adjustment, the texture - Design seems to be very good.
Because the shape is almost the same as OEM, it seems that it can be used without discomfort!
View detail
Lightweight rotor
Hello, I arrive very fast, it is already installed, I thought it would be noticeable more, there is a difference in weight compared to the original of 152 grams. But not bad for the price. Very serious seller a store that I recommend. View detail
Fits: HONDA cross-cub 110, HONDA Super Cub 110
It saves labor and time to process
I also thought whether to handle the removed Grip with a hand-held tool, but it takes time to finish this product as well, considering the fact that such a place as the installation place of Wiring and Indicator of Grip heater etc. is lost, Whether it is better to purchase this product.
It is very beautifully shaped, and if you look at the actual thing, I already bought it and it feels like a correct answer.
View detail
Fits: YAMAHA YZF-R25, HONDA CB250F, その他 , HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA GROM, HONDA GROM, HONDA 400X, HONDA CB1100, HONDA CB500F, YAMAHA YZF-R3, HONDA 400X, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, YAMAHA MT-09, SUZUKI GSX250R, HONDA Forza300, YAMAHA MT03, KAWASAKI Z125 PRO
Looks good to BlueBlack
Blue color of Anodized is gathered up as Accent in the whole of BlackBase.
I use it together with MASTERSinterCap of the same series
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150
Race ish without complaint and performance
Now it is hard setting a second stage setting, is slightly harder than OEM?
From the OEM suspension which I borrowed on a car, the unevenness of the ground, steps with the sidewalk, parking lot etc. I think that the feeling of thrusting up from the part that is Horizontal Type in.
However, although it is possible to adjust the hardness by turning by hand, it is easy to turn because there is no obstacle with respect to the suspension of the Right Side, but Left Side is close to the Engine, so it is difficult to rotate by hand I am slightly dissatisfied with being in a state
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX
The loading capacity increased by one machine
It is good that the base and Case are as much as 50 L as set sales.
It is still good because I think that two full faces fit perfectly.
It is Wound that the number of keys increases
View detail
Fits: HONDA CBR250RR(2017-), HONDA CBR250RR(2017-)
OEMCowl requires processing
CBR 250 RR MC 51 has general purpose and competition use, it is Cowl exclusively for MC 51 of so-called HRCRelease. There is for Race in the item description, but HRCSpec. Is correct.
In order to install on general vehicles, processing of Number Seal Cowl is required. It takes time and effort for Fitting, but if you are a dexterity you do not have to worry.
Please see the diary for details.
View detail
Cool!
Texture, coloring is unquestionable.
It is necessary to adjust a little Bracket angle of Brake switch.
(PliersorPliersetc. So, I will bend a little.. )
Return is a little weak, so purchase UniversalReturnSpring together and in the Master cylinder
I recommend installing.
The footpeg position is in 4 stages, and it can be easily adjusted even after installation.
The price is a bit high, but there is a sense of quality and I am satisfied.
View detail
Good for color Accent
Since Z125PRO SE is only Black when viewed from the top, I chose Blue's Color.
It is good feeling that Color is Accent ♪
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 Pro
Tail lamp It is a little sticky around the lamp
I am Firmly making a part that can carry baggage up to 6 kg.
Since the Rear box is about 3 kg, the actual luggage is 3 kg.
Box's Largeness is Helmet + Rain jacket (Thick) It will be full with + Gloves.
Carrier's frame comes around the Tail lamp so it feels a little sticky.
View detail
It is hard for the Large to open the Key shutter.
There is no problem if you just insert the key and use it normally,
Finally, it is hard to open it when closing Shutter.
It's just Cover, but the accuracy is bad.
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 Pro
I made it Firmly.
Carrier is a practical surface with a loading capacity of 6 kg, Box is not well understood, so I chose to be Set.
It was installed in an hour and a half with a tool at home.
Carrier had an Instruction Manual with a photograph, but there was no instruction manual of how to install the base part of Box.
Box inside is not Flat. I tried putting PetitPetit.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
It is considerably black.
Four entries, I think that it is advantageous because the light bulb is also attached
Since you do not cut the screw groove, it is better to put the screws once to insert the screws
View detail