Reviews
Color installation is Large variety
As others have reviewed, it is difficult to install the four collars for attaching the Fender EliminatorBody to the body. I think it would be much easier to work with if the collars were at least flange-like.
The appearance is neat and satisfactory. The weight seems almost the same as OEM.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit installed
It is an impression of Refreshing with a small number of parts.
Installation Instruction Manual is not included.
I was in the previous MODEL!
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is one of the first parts you want to install when you buy a new car. View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is the cheapest, but the texture is quite nice. View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Stylish and cool!
PCXStandard Equipment's Rear Fender was too large and bulky, but this Fender Eliminator has a more stylish, reflective look, and I was very satisfied with the large size. View detail
Refreshing and Style!
We chose this product because we wanted to refresh the Blinker from an OEM Fender. I considered other manufacturers, but I thought that this product, which uses OEM parts, would be easy to obtain even if the Blinker was damaged due to a fall, etc. I also thought that a product with an LED Lamp would also be a good choice if the Lamp ran out. Also, the product with LED Lamp was also chosen because we thought that if the Lamp ran out ….
I was assured that the product was thick and sturdy.
Installation is no problem as long as you follow the instruction manual without rushing.
View detail
Can be attached to JC92 2023 MODEL.
Installation Instruction Manual can be downloaded from our website, it is not attached for environmental protection.
With a cold drink in hand, even a novice like me could install it in about 40 minutes.
The quality is a trusted Endurables product, so there are no holes in the mounting position, no machining, no bali etc.
It is a little bit of a little bit.
Since Wiring will be partially exposed, flooding treatment is required by each party.
View detail
Stable Endurance
It is no exaggeration to say that Endurance is the name of PCX. View detail
Endurance Fender Eliminator Kit installed
Fender Eliminator Kit for JC92 has few options.
I have twice purchased from We BigSite, specifying the make and model of the car, but I couldn't install it either time.
Site's search system is unreliable.
Back to the story since it was Gap.
I felt that this Kit was inexpensive and quite thoughtfully designed.
I was relieved to be able to install Snap around the Mounting Bolt area with a collar.
I think Reflector is good for quick installation of OEM products.
However, installing a reflector that is originally quite large in size does not look good.
The height of the blinker attachment area appears to be too generous and elongated.
I think it should look a little shorter.
Either way, I recommend this Kit because of its price/effectiveness and affordable Gold amount.
View detail
It is a bit expensive, but Bolt On completes the process.
[How is it used?
Mainly day-trip mountain road touring
Was the one you received as per Image?
The instruction manual is a pain in the ass to get on the web.
Was the installation difficult?
I think anyone can do it because the instructions are very detailed.
How was your experience with it?
The product is good, Style is much better. However, the mud splatter will be worse.
[Included Parts:were they on?
It was a relief to know that the minimum was included.
[Was there anything that disappointed you?
I don't know about paperless, but an instruction manual would be nice.
Other items that would be helpful
Anyway, it is easy to understand and Bolt On is not frustrating.
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
PENALTY!
The design is simple and the installation was very easy. The material is steel, so it is not lightweight, but considering the price, it is a very well made product. View detail
For CRF250L MD47.
When YOSHIMURA's Exhaust System is installed on CRF250L MD47, the Number and Exhaust System interfere with each other, so it cannot be installed.
MORIWAKI is EnduranceLarge sturdy.
DRC's Fender Eliminator Kit was Large sturdy even for YOSHIMURA!
View detail
Fits: KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja250
Nice inexpensive product.
No one has made an Impression yet.
I was hoping it would be helpful.
Was the one you received as per Image?
→As per Image
Was the installation difficult?
→As shown in the photo, all OEM parts were diverted and installed.
The Blinker is the most Large oddity, and it took a lot of time to install the Rubber parts.
About 60 minutes of work, 90 minutes to clean up.
How was your experience with it?
→ generally good
I just wish the Reflector was lower...
Fender Eliminator itself is satisfactory with no problems
[Included Parts:were they on?
→There are many OEM diversions, so not many included, they were all there!
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
? Point of installation and hang
Thin tip for Blinker removal and installation (sorry my vocabulary is limited)
Availability and clarity of Instruction Manual
I think the description is Large sturdy.
It's easy to understand, but as I keep saying, it's a blinker...
? Items to buy together
Loading Hook will be lost, so we will need to replace it.
I purchased a License PlateHook
Opinions and requests to Manufacturer
I think the Blinker is Large strange so that it cannot be easily taken off.
But go a little easier on me (laughs).
View detail
Fits: HONDA MSX125SF, MSX125, GROM(16.6-) [EBJ-JC61], GROM(13.6-16.6) [EBL-JC61, HONDA MSX125SF, MSX125, GROM(16.6-) [EBJ-JC61], GROM(13.6-16.6) [EBL-JC61
It comes on without any processing
I was able to install it without any modification.
The paint quality is not bad and Material:Because it is not aluminum, it is less likely to crack due to vibration, even on single-cylinder Motorcycles.
View detail
You can install it by yourself as usual.
When I installed it by myself, the most troublesome thing was to remove the Blinker from OEMFender, but it was so hard that it was troublesome.
The impression after the installation is that the Rear Fender that was sticking out to the rear is now small and tightened up.
However, because the material is steel, I think that the back side which the Small stone hits should put up Cutting sheet etc. beforehand, and the one which works from it, it will not be troubled with the measure of Rust etc. afterwards. I put up the seat of Carbon Style.
The installation time is about 1 hour if you do it in hot weather.
View detail
Refreshing around the Rear of the Grom.
They're also in compliance with the new standards for Number angles.
It's a large person angle.
As for the installation, I have to put four Sleeves between this product and the car body, but this is not easy!
If you could weld it on from the start, it would reduce a 30 minute job to about 20 minutes.
The thickness of the steel plate is also quite thick and solid.
You are the quintessential Endurance.
The fitment with the tail lamp is also very refreshing, so it doesn't look like an afterthought.
Recommendation
View detail
good
Easy to install even for amateurs.
License Plate angle is 50 degrees
View detail
Fits: YAMAHA NMAX(2DS-2), YAMAHA NMAX155, YAMAHA NMAX(2DS-2), YAMAHA NMAX155
It's a good product
For installation, please refer to the Exhaust System It was not necessary to remove the cowl and other parts of the rear suspension I don't have the usual maintenance knowledge and experience or the necessary tools as they need to be removed It is expected to take some time for those who
It's a little disappointing that there was no Reflector in the kit, but the photo shows the Reflector I thought it was naturally included because it is even in the picture, but it was not included in the Kit, so you need to buy it
The triangle mark for the Hara2 must be purchased later if needed, and it is available from DAYTONA You will need to install the original 2StickerBase angled (item number 69688) The flat base may interfere with the rear tire at an angle
However, as a product, there is no need to cut NORMAL and other manufacturers' I think it's very good compared to the ones
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125
Necessary enough to be a Fender Eliminator, and it's a great spa!
The costumer is better than other companies!
But Material is steel …
Active and doubled Fender Eliminator are like aluminum!
If you're thinking Rust or lightweight, buy the higher end!
The nice thing about this Kit is that there's no extra purchases to install! But since it's steel, I'm worried about Rust with stepping stones and bouncing up and down
So I'm going to go with Chassis [Color] I prepainted Clear before I put it on!
I don't think we'll have to worry about Rust for the time being on this one!
Also, I don't know about the other Fender Eliminators, but Number stood up and I'm somewhat concerned that it's there …
Well, if you angle it, it's against the law and that's about it
I tried to add a license frame, but it interfered with my mind due to clearance problem So it has to be the same Size as Number or it won't be attached!
I cut it out of aluminum plates and made a mudguard on the back of the Number!
I'm sure every Fender Eliminator Kit is the same, but I'm pretty sure the bounce up is the same It's coming, so if it's raining, you're sure to get water and mud splashing up to the tail lamp!
If you like Beauty, OEM is BETTER!
View detail
Fits: YAMAHA NMAX(2DS-2), YAMAHA NMAX155, YAMAHA NMAX(2DS-2), YAMAHA NMAX155
Easy installation!
Installed on a NMAX commuter car
Rain or shine, the Fender Eliminator Kit is a must
Installation is easy, as a careful Instruction Manual came with it
This product features the Material:Plastic's Inner fender is included
It's made by another manufacturer "Cut Inner fender, please Many products are called
The Cut is a Large strange and the appearance of the past Cut surface is wavy and I feel lonely I've been in the past
Cheaper Kits exist, but I didn't hesitate to buy this one
The only thing that makes Number a little too quiet is the Demerit
It's just that it's hard to get the right angle to your liking
View detail