Reviews
It seems to be good for vibration reduction.
I'm installing it on my ZrX1200DAEG.
The ZrX1200 DAEG didn't have that much vibration, but I installed it based on looks.
But somehow the vibration seems to be lessened - it feels like it's lessened.
I drove it on the highway, and it looked good.
The video is up Please check it out
https://www.youtube.com/watch?v=kqYcObXLeO4
View detail
It's comfortable
I bought this one to stock up on 12VMONKEY's Seat.
Prior to planting it, I had to take a break every hour to get my butt in gear, but after planting it, it extended to once every two hours.
So it's definitely working.
I was able to stock up on SS Size without cutting anywhere.
View detail
I couldn't use it for Grom (tears).
I bought it on a trial basis to see if it didn't fit the groms. However, Position was too low and too close, and I returned to NORMAL after all. The stability of NORMAL was the best, that it was a waste of money. View detail
It will be a normal NAKEDPosition.
The OEMHandlebar was unsuitable for a long distance with the feeling of riding with the elbows stretched, but it is very comfortable after the change. But after the change, it is very comfortable, and the tightened feeling is good because I made the color Black. View detail
Just right?
I replaced it from highMODEL along with a color change.
It's a bit more expensive than OEM, so if you're looking for something a bit more upscale, this is the recommendation for you.
View detail
Just to put Lever Guard of YOSHIMURA
I bought it because I wanted to wear my YOSHIMURA Lever Guard.
When I consulted with the person of Shop, I bought it at once because it is not attached with OEM Handlebar. I was puzzled at first because the position of the Handlebar changed, but I understand the ease of use well when I get used to it.
View detail
It's just the right size feeling!
I replaced it from the OEM Handlebar on the ZEPHYR750.
It is possible that the Handlebar was bent when you were standing and mocking.
The concept of the Handlebar replacement and selection was to bring it forward a bit without changing the look and feel too much from the OEM.
This Handlebar is just fit.
The Handlebar Switch fixation holes have been machined and no changes to the Cables are required.
Position also comes out about 1cm forward.
Riding is a good fit.
I don't know until I get on it.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI VERSYS-X 250, KAWASAKI NINJA250R
high cost performance
I bought a Chinese Lever from Amazon that was too crappy to be replaced.
Easy to install. No problems.
Wobble is minimal in both Brake and Clutch.
Fingers are ClutchQuantity:I've been running with 2pc and 1pc of Brake on it, and it's certainly easy to grip.
Compared to Chinese Lever, Brake also works better than Chinese Lever.
Inside Lever (Reverse side?) If you set the Clutch position too close and pinch your finger, the Gloves It's not easy to be in pain when you're
But this is a matter of adjusting the play of the Clutch and the way it rides, so it's not a negative aspect of the product And.
The uncertainty is not Foldable, but rather a depression as described above to save weight. (?) The only thing that makes me feel that it will break easily when I fall over.
The price is low if you think it's a reliable Brand product and the grip is excellent.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
I'm glad I did!
The New Model Katana has been written about in various articles, but it has poor footing Her feet are short or so short that her heel floats on one leg alone
It was said in some articles that the installation was done by shifting the exhaust system, etc But the Installation Manual says it takes 30 minutes
It took me less than an hour to install it
Of course the Exhaust System did not shift
Just take off the collar of the Shock and Swing Arm that LINK's Bolt is running through and Needle roller bearing will be RoseRose, so be careful!
I personally think the KATANA has a high ride height, and the Lowdown has lowered it and Parenthesis looks good
The Rear is down 20mm and the Front is protruding 15mm considering the balance
If I have one foot, I can get to the heel and enjoy riding KATANA
When I tried it, the Habit that I felt before Lowdown was gone and it was very easy to ride became
Also, the Side Stand can be replaced with a NORMAL cheesy look that I don't like, and it looks good It's better
View detail
Fits: KAWASAKI ZEPHYR400X, KAWASAKI BALIUS2, SUZUKI SV650, YAMAHA MT-07, KAWASAKI ZEPHYR750, HONDA VTR250, YAMAHA XJR1300, YAMAHA XJR400R, HONDA CB400SF, HONDA CB1100EX, HONDA CB1100EX
Happy with the shape
i installed it on klx125 On roadSpec
ActiveSwitch box, ActiveHigh Solo, OEMBrake holder, OEM Clutch holder and Blinker switchBox without The fitment around the throttle was Limit The holder is also strictly in the same position as the OEM, so I moved it outward a bit
the klx125 is a non-dividing type Clutch holder, so the black color that I purchased this time has the following features It will be scratched during installation
If you are concerned about scratches, you should choose Plating (I went with Black this time because of the late delivery date.)
Active's High Solo Cable is 900mm and Off- since this value is based on the assumption of roadHandlebar + UpBracket, the handling of Cable The Clutch Cable handling was no problem for the OEM
the Handlebar from effex has a good texture and I will continue to use it
View detail
I used it on the W800 for diversion and it's the BEST position for me
I should have gotten this one right from the start!
In the same EZ-FIT-Bar (Because they are the same Manufacturer.) i was using the EZ-FIT-Bar for the kawasakiZEPHYR1100, but
I wanted the overall width of the car to be narrower than the width listed on the registration certificate by more than 2cm, and I wanted a little more height, and In
Hardy Load Bar (Intermediate) I used this GSX1400 version for the W800
The holes in the switch box will have to be re-drilled, but the height and width will be within the limits of the vehicle's inspection certificate It fits in, and you don't have to put it back together for inspection
It is now Up Position for slow touring
It would have been best if this GSX1400 was available in the Plating color, so that's the only cosmetic star One point is deducted
Other than that, it was a Large satisfactory product that I have no complaints about
View detail
This is a very good position for use with the W800
touring bar made by POSH for W800 was not yet ready for production As an alternative to bar
I tried this one, which is close in dimension
A little more than NORMAL and 4mm higher than the Handlebar1 pc before the Touring bar The state of the system will be the same as it was before
Also Quantity:Pair (for Left and Right) The width is slightly narrower at 1cm each
The height of the Handlebar is just right for my short stature when I reach for it, and the width is a little It's so narrow that it's easy to relax around the shoulders without the extra tension in my shoulders
The switch holes are not aligned with the ZEPHYR1100, so you have to open them separately Mm
It would have been great if the surface finish was a little nicer, but the condition of the plating was not so good so
I lost a few stars
But from a cosmetic standpoint, it's great!
View detail
I used it with W800
touring bar made by POSH for W800 was not yet ready for production As an alternative to bar
I tried this one, which is close in dimension
A little more than NORMAL and 4mm higher than the Handlebar1 pc before the Touring bar The state of the system will be the same as it was before
Also Quantity:Pair (for Left and Right) The width is slightly narrower at 1cm each
The height of the Handlebar is just right for my short stature when I reach for it, and the width is a little It's so narrow that it's easy to relax around the shoulders without the extra tension in my shoulders
It would have been great if the surface finish was a little nicer, but the condition of the plating was not so good so
I lost a few stars
But from a cosmetic standpoint, it's great!
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-)
No worries for the little guy!
My wife I'd love to ride the CBR400R! So I built a Lowdown Kit
That's because my wife is only 149cm tall, so she can't get her footing at all in a NORMAL state!
The result is that I'm now on my toes!
As a point of caution, if you lower the height of the car only, the body of the stopped car may stand up → the car may roll over when stopped Increased Risk
So I guess that means you have to choose COMPKit, which also shortens footpegs
View detail
Comfortable!
I thought the STD Handlebar was a little too wide, so the Easy Fit Taper Replaced by Bar
It's 3 cm narrower than the NORMAL, which makes it very comfortable to drive
Cornering is also easier to do, so you can recommend it
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI VERSYS-X 250, KAWASAKI NINJA250R
Comfortable to grip
I replaced the Lever
Various levers are available from various companies, but I chose this one for its grip and comfort
It's not difficult to replace and can be done in a matter of minutes
I'm not complaining about the OEM Lever, but if I'm going to replace it, I want something good I bought it because I wanted to
It's not Foldable, but it has the ability to adjust, which is nice
View detail
Fits: YAMAHA FZ6-S FAZER (FAZER), YAMAHA FZ6-S, YAMAHA FZ1 FAZER (FAZER RN21J), YAMAHA FZ1 FAZER (FAZER RN17N), YAMAHA FZ1, YAMAHA FZ1, YAMAHA MT-09, YAMAHA XJ6 DIVERSION (DIVERSION), YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ6-N, YAMAHA FZ6
Recommendation
The OEMLever seemed a bit far-fetched, so I bought the new SmoothFitLever I did
It can be adjusted six times, so I was able to position it to fit my hand
The grip felt pretty good as well, as it was called SmoothFit
I can recommend it!
View detail
The vibrations have been significantly reduced
Because the Bar End of Penske Handlebar was plastic, the Handlebar I chose this product to reduce the vibration and appearance of the Compared to the OEMHandlebar, the vibration is significantly reduced View detail
Replacement handle bar for MT09 tracer
Great product and great packaging. Shipping take 5 days to Malaysia.Plug and play for Yamaha MT09- Tracer 2017.The width of the handle bar is roughly 3-4 inch shorter than the original handlebar. Installation take around 30 minutes.Very suitable for a person with shorter arms for more comfortable riding position. High quality black coating handle bar. overall satisfied with webike services. thanks View detail
Easy fitting for you too!
I spec'd to Grom jc75 The OEM Handlebar was distorted a little by the fall down I bought it to be able to play at Bar End
In conclusion, it's a buy
It seems to be slightly lower and farther away from the OEM, which makes it less cramped and more rigid It feels very good to
It's easy to install, even for a novice
Second Type Model Handlebar with First Model Type Grom It's also a Recommendation for those who want to change to the same size, since it's almost the same size
Easy fitting for the heart of a grommet rider
View detail