Reviews
Fits: SUZUKI GSX1400 01-07, SUZUKI GSX1400 Z 01-07, SUZUKI GSX1400 01-07, SUZUKI GSX1400 Z 01-07, SUZUKI GSX1400 01-07, SUZUKI GSX1400 Z 01-07
It attaches to GXS1400. With it being pure, since it was the almost same form, it clung satisfactorily at all. When pure, the setback spacer was also attached, but even if it changes to this handle, it is in the state attached satisfactorily also
It attaches to GXS1400.
With it being pure, since it was the almost same form, it clung satisfactorily at all.
When pure, the setback spacer was also attached, but even if it changes to this handle, it is in the state attached satisfactorily also there, and it is exchangeable.
And yet, since appearance also became smart and was also dressed up, it is satisfied.
View detail
It attaches to GSX1400. It purchased by the handlebar and a set. Although it is made in price very well, it fits firmly, and it is few, and vibration also becomes smart and appearance is also considerably pleased with it. However, kana which i
It attaches to GSX1400.
It purchased by the handlebar and a set.
Although it is made in price very well, it fits firmly, and it is few, and vibration also becomes smart and appearance is also considerably pleased with it.
However, kana which is possibly hard to remove when removing, once it attaches ... Touch called ? is carried out.
View detail
The handle position was under Saki for a while for itself (height of 175 cm), and when got on for a long time, it was coming to the waist. Therefore, since expense all started with exchange of a cable and a hose although up spacer wearing or exchange
The handle position was under Saki for a while for itself (height of 175 cm), and when got on for a long time, it was coming to the waist.
Therefore, since expense all started with exchange of a cable and a hose although up spacer wearing or exchange of the handlebar was considered, it was suspending.
At such time, although the travel of the handle position was a few, it purchased and equipped with these goods because exchange of a cable and a hose is unnecessary.
Work also went by manufacture according to vehicle type to the smooth, and finished with 30 minutes.
When it actually ran, it was a slight change, but it became a quite easy riding position.
The burden on the waist also decreased considerably.
However, it is in the state where it can compromise with itself, and is not perfect.
Those who ask for a big change had better use a handlebar with a larger variation for exchange of a cable and a hose by preparedness.
View detail
Since CB750 is an air cooling 4 cylinder, vibration is felt, but it is not a degree which becomes unpleasant. However, there was an engine resonance area at a certain speed region and rotational frequency, and only the area thought if improvable for a
Since CB750 is an air cooling 4 cylinder, vibration is felt, but it is not a degree which becomes unpleasant.
However, there was an engine resonance area at a certain speed region and rotational frequency, and only the area thought if improvable for a while since high frequency vibration transmitted and was worrisome also for the handle, and it equipped with it.
It was changeless, so that it actually ran and the great could be thought.
Did the propagation of vibration become a mild for a while?
Since appearance became good, grip end is merely made at least into three star.
View detail
Since the path of clamp part knurling was large, the attachment to a clamp suffered troubles. I would like to ask you for management of a path exactly.
Since the path of clamp part knurling was large, the attachment to a clamp suffered troubles.
I would like to ask you for management of a path exactly.
View detail
It is used for RGV250gamma. Pure bar end was damaged, and since acquisition was not completed, it exchanged. Although I feel that vibration became fine somewhat compared with the pure thing, I think that vibration decreased considerably when compa
It is used for RGV250gamma.
Pure bar end was damaged, and since acquisition was not completed, it exchanged.
Although I feel that vibration became fine somewhat compared with the pure thing, I think that vibration decreased considerably when compared with the bar end in which weight in particular is not contained.
Although I think that there are individual difference and a difference of a car body in a physical feeling, please use thinking that it was deceived once by all means.
In order that a price might stretch a little for bar end, I did the star to four.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S(01-08), KAWASAKI ZRX1200S(01-08), KAWASAKI ZRX1200S(01-08)
Since it had a traffic accident and the pure handle had bent, it exchanged with EZ-FIT Bar drastically. Although it seems to be almost changeless for appearance, it turns out that it straddles, or becomes and the position is changing. Since a few
Since it had a traffic accident and the pure handle had bent, it exchanged with EZ-FIT Bar drastically.
Although it seems to be almost changeless for appearance, it turns out that it straddles, or becomes and the position is changing.
Since a few is raised and it is coming to the front, the time of long-distance touring, etc. are comfort!
View detail
Since he wanted to unify with the point handlebar of use 笆?selection in CB400SF. Since BIRIBIRI of a selection 笆?merit handle is mitigation handlebar weight. although it is easy, I feel that pure bar weight was enough for 笆?demerit, especially not
Since he wanted to unify with the point handlebar of use 笆?selection in CB400SF.
Since BIRIBIRI of a selection 笆?merit handle is mitigation handlebar weight.
although it is easy, I feel that pure bar weight was enough for 笆?demerit, especially nothing 笆?impressions attachment which are natural functions -- 笆?-- pure to the other person who is recommended in a direction to unite with a recommended point handlebar or I think that it is good by the bar weight of the product
View detail
This time, the GEL-ZAB S addition was carried out at the sheet of VFR800. Since it has ridden on CBR600F4i (pure : rice cracker sheet) for a long time from the first. Although there was no complaint in the sheet form and hardness of VFR, it asked
This time, the GEL-ZAB S addition was carried out at the sheet of VFR800.
Since it has ridden on CBR600F4i (pure : rice cracker sheet) for a long time from the first.
Although there was no complaint in the sheet form and hardness of VFR, it asked for much more pleasure.
It is a usage feeling.
It went for day's trip touring with a mileage [ total ] of 660 km by the state where it equipped with this.
Surely, the fine vibration from under the hips decreased.
However, the pain of a buttock which will also have how to ride and transit time, and the pain of the waist were not necessarily lost at all.
However, time until it becomes so thinks whether it became long.
(Highway cruising and 3-hour continuation are also margins) It seems that it was effective when thinking so.
Moreover, as a subeffect equipped with this, the sheet surface became soft and the slide of the buttock on a sheet decreased.
Even if it hangs gaily, a center-of-gravity location does not shift.
All that matters is change of appearance.
It is made hard to be conspicuous by building in the sheet back side.
I think whether it was the thing to say and which was borne by the purpose.
It will be conspicuous, however it may see so that it can grasp from a photograph 4 piece eye.
It may be [ of the sample photographs of the package of this product ] congenial for the sheet of a street system with it. [ the thick and sheet surface and ] [ flat ]
As the notes at the time of purchase.
Be careful of not being put on the market in a form like product sample photographs.
The actual product configuration has become like an attachment photograph 2 piece eye.
Because it is a reason for it having been square and having become a sheet, thanks to this.
This needs to be permissible.
Since it is not an ineffective translation anyhow.
If a motorcycle is operated, I will think that it is good for the direction which suffers damage to the strongest at the hips and the waist, and the direction which wants to change a sheet into the state which is not common.
View detail
Since the handle of FZ1 was exchanged and the chatter had come out also in the time of the usual run, it attached. At first, it is used as it is. (Photograph: Upper left) It is canceled considerably and a chatter is good touch. If the handle e
Since the handle of FZ1 was exchanged and the chatter had come out also in the time of the usual run, it attached.
At first, it is used as it is.
(Photograph: Upper left) It is canceled considerably and a chatter is good touch.
If the handle exchange back is made into 100%, it will cancel to about 20%.
About [ which is hardly worried ].
since bar end is not liking too, I would like to exchange for the bar end of POSH on hand -- since he wants to make the effect of handlebar weight maintained but -- the photograph:lower left -- like -- processing.
(It is processible only with a long screw and a bolt.)
Rubber Division is cut as a half in order to use exactly good die length. It teaches into a handle and is using that of POSH for bar end.
View detail
It exchanged for the oscillating measure. Probably, it will be better for the effect in a single article to be unknown since the multiple exchange was carried out simultaneously, but to be rather than there is nothing. the start -- -- although it
It exchanged for the oscillating measure.
Probably, it will be better for the effect in a single article to be unknown since the multiple exchange was carried out simultaneously, but to be rather than there is nothing.
the start -- -- although it obtained and was touch as ??, an effect is realizable if you go out for touring.
The numbness of a hand also has little prolonged operation and the number of times (time) of resting can also shorten it.
Especially the burden on a hand decreased in prolonged operations, such as a high speed.
View detail
Since it was the bar end nakedness after grip exchange of KDX125SR, bar weight was taught aiming at oscillating mitigation. Although it may be a little greenish in the sample picture of gun meta, it is bluish gun meta in practice. Since the handle
Since it was the bar end nakedness after grip exchange of KDX125SR, bar weight was taught aiming at oscillating mitigation.
Although it may be a little greenish in the sample picture of gun meta, it is bluish gun meta in practice.
Since the handle was putting in the renthal, it chose a 14-mm thing.
Although it is a forge fire of an effect, I think that it is quite good by the gel grip and a synergetic effect.
Rather, the vibration from a step or a sheet comes to be very worrisome... It is a recommend at those who are using KDX with town paste.
However, let's buy carefully a handle inside diameter.
View detail
Efficiently, with no complaint. Chatter vibration of the pipe handle of a duralumin will be mostly made into nothing, if it is a level of a multi-engine. although appearance is not awesome at all -- a long distance -- it runs -- if it becomes, it
Efficiently, with no complaint.
Chatter vibration of the pipe handle of a duralumin will be mostly made into nothing, if it is a level of a multi-engine.
although appearance is not awesome at all -- a long distance -- it runs -- if it becomes, it will be a very strong ally.
View detail
Fits: SUZUKI GSX1400 01-07, SUZUKI GSX1400 Z 01-07, SUZUKI GSX1400 01-07, SUZUKI GSX1400 Z 01-07, SUZUKI GSX1400 01-07, SUZUKI GSX1400 Z 01-07
The handle of normal thinks slightly far kana and I thought that it was good with the back coming to the front to a slight degree. if EZ-FIT BAR is this side to a slight degree in the back -- it is recommended at those who say. The position became
The handle of normal thinks slightly far kana and I thought that it was good with the back coming to the front to a slight degree.
if EZ-FIT BAR is this side to a slight degree in the back -- it is recommended at those who say.
The position became easy.
Operationally, it was not uncomfortable.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
It is quite charm to have no processing. Although attachment was done by itself, it could be attached very much to the smooth, and it did not have a problem, either. A degree of comfort compared that it was pure, and became easy.
It is quite charm to have no processing.
Although attachment was done by itself, it could be attached very much to the smooth, and it did not have a problem, either.
A degree of comfort compared that it was pure, and became easy.
View detail
Although appearance does not change at all, it rides, or it becomes and it is easy. When normal, the wrist was fairly painful, but it was completely lost. Although a little [ travel ], it is operative size. However, gun meta is not different f
Although appearance does not change at all, it rides, or it becomes and it is easy.
When normal, the wrist was fairly painful, but it was completely lost.
Although a little [ travel ], it is operative size.
However, gun meta is not different from the normal which was too modest at all...
View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SF, HONDA CB400SB
Handle form authentic positive in GSR is not liking at all, but the change reason of a handle is that it was too wide and there were also too few iris diaphragms, and an arm and the shoulder were like [ which become painful and get tired ] shortly after a
Handle form authentic positive in GSR is not liking at all, but the change reason of a handle is that it was too wide and there were also too few iris diaphragms, and an arm and the shoulder were like [ which become painful and get tired ] shortly after a riding posture did not suit liking of it but operating.
Having chosen not the object for GSR but the object for CB400 SF/SB 99-07,
Since it did not change, when width is narrow and the iris diaphragm also looked for the object for vehicle types besides a hard, since the object for CB400 SF/SB 99-07 was likely to become the compactest position, the width of what can change height in the same object for GSR, and an iris diaphragm were chosen.
I think whether it turns out that especially width and height are compact fairly.
Furthermore, since it will hang down to a grip part, an angle will be attached and height will further fall if a handle is moved to this side position a little at the time of attachment, it can be made a quite compact position.
Although this product serves as a design only for a vehicle type fundamentally and baffle hole processing of the switch box had already been performed, since it naturally became the appropriation for another vehicle types, the hole was made so that GSR might be suited.
Since handle form became compact low rather than normal, cables did not need to be extended and it has equipped with it as it was.
Moreover, although it thought whether anything would hit a tank because a grip location changes, it is OK, even if nothing interferes but it turns a wheel to right-and-left full.
Since handle width became narrow and it became unnecessary to extend an arm as an aim, fatigue reduces, and since it is not necessary to carry out an excessive input into a corner ring, it becomes quite easy to ride.
It becomes easy to hold the feeling of handle width because width became narrow, and the pickpocket omission at the time of traffic congestion became easy.
By the synergetic effect of that the handle itself became low and the grip location fell and back step wearing,
In a front, a riding posture falls, the load to a next door and front suspension can be performed effectively, and it becomes easy to take the timing which moves suspension positively in the time of a cutback of a corner ring, etc.
The engine rotation region where blur of the mirror by remarkable vibration takes place by a normal state shifts from per 5~6,000 rpm per 3~4,000 rpm, and blur is settled and it becomes very easy to do a back check in 4~6,000 rpm and the rotation region beyond it which are used regularly.
However, it is the grade of not having necessarily fitted in the vibration [ itself ] completeness and having become Massey rather than the time of normal to the last in the common rotation region.
View detail
It has attached to the sportster. Although it was like [ whose a hand vibration of a handle is large and is palsied with about 60 K at the time of a run ] before, after attaching this, the touring of the general road became quite easy. However, vi
It has attached to the sportster.
Although it was like [ whose a hand vibration of a handle is large and is palsied with about 60 K at the time of a run ] before, after attaching this, the touring of the general road became quite easy.
However, vibration increases at about 80 K conversely, and it hardly changes on a highway.
Although vibration does not become small in all the speed region, since it is good for how to use me exactly, they are four stars.
View detail
Fits: HONDA CB400SF Revo[NC42] 08-13, HONDA CB400SB Revo [NC42], HONDA CB400SB [NC39], HONDA CB400SF[NC39]
It will become easy to ride if you thought whether it would be almost changeless since it was a 1cm up 1cm back, but it attaches! It is satisfactory in operative size. Since the mounting hole of the switch box was only for the vehicle type and it did
It will become easy to ride if you thought whether it would be almost changeless since it was a 1cm up 1cm back, but it attaches! It is satisfactory in operative size.
Since the mounting hole of the switch box was only for the vehicle type and it did not need to be processed, easy one of attachment was of great help!
View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SF, HONDA CB400SB
The Low type low [ about 10 mm of pure twists ] was used. I thought that it did not so much change at about 10 mm. If it goes to attach and run .... It is called a position and becomes easy to manipulate. It becomes easy to attack when running
The Low type low [ about 10 mm of pure twists ] was used.
I thought that it did not so much change at about 10 mm.
If it goes to attach and run .... It is called a position and becomes easy to manipulate.
It becomes easy to attack when running a peak.
It rides easily also at the time of town riding.
It was good to purchase.
View detail