Reviews
It was too difficult for me.
I had experience pasting automotive film in the past, so I bought it thinking it would work, but it turned out to be disastrous.
The shape is complex and cannot be aligned well with subtle curved surfaces at all.
Moreover, it is difficult to remove air bubbles because of the thickness of the ??Film, and it is stretched so much that air bubbles do not come out at all.
It is wiser to be honest and ask the PRO to do this.
Sorry, this is a bit of a whiney impresario. Yes, the product is solid and looks good.
View detail
Cut is inaccurate.
I don't need the spray bottle included, etc., so I want it to be cheaper and more accurate. View detail
viscosity
When I remove the Cover during the next touring after applying the adhesive, the pad at the bottom is fluttering. Already no adhesion.
It was put on by a Shop Service person. I wouldn't write this kind of comment, but it's a pity that PRO put it on.
I'm wondering if I should buy the same item.
View detail
The look and feel requires Zero preparedness.
The product is extremely cheap, and I thought it was a SiliconCoaster that you can buy at a 100-yen store. It was so solid that I thought it was a cross section of a fish cake, and there was no texturing process, etc.
Undoubtedly, it will make the installed vehicle look cheap.
I can honestly say that the texture and build quality are definitely not worth the price of the product.
If judged by product production Cost, it is clear from the appearance that the R&G company's product is definitely much more costly, and the dress-up satisfaction is higher.
As for the feeling of use, it shows an effect (high gripping force) that is commensurate with its material. In my case, I have a habit of sliding the product on the contact surface when I move my posture, so I prefer a slightly weaker grip like R&G's. However, R&G's support for GSX-8S is more effective (high grip strength) than R&G's for Tank side. I prefer the slightly weaker grip support force of R&G products, but the R&G product for GSX-8S has a pad on the tank side but no pad on the frame cover side (lower side), which is unfortunate.
Therefore, R&G tank grips are only used in very rare situations, such as when a turnaround of winding is necessary, when a high-speed corner is turned in, and when turning, and therefore, the support as a tank grip is not obtained. It is a mere decoration. (I am 176cm tall and have an 85cm inseam.) ) We would like to inform you that we had no choice but to purchase this product for this reason.
In addition to the above, care must be taken during installation. The included degreaser is extremely aggressive to the frame cover and will definitely discolor the resin parts to a whiteish color. However, for those who focus on keeping the body clean and well-maintained, it is likely to receive a very Large mental Damage.
For this reason, we can say that if you are nervous or are also considering a Case to remove SiliconPad, you should be careful about using the supplied degreaser.
View detail
Weak adhesion
The one on the Tank is Large sturdy, but the one on the resin part is too weak adhesion!
It came right off ….
The color is more Color than Black.:I think it would be better to say Gray
View detail
[Color] Clear does not recommendation
[How is it used?
I bought this so that I could use a little less force on the Knee grip, but when I applied it myself, it had too many air bubbles, so I bought it a second time. [Color] Select Clear
Was the one you received as per Image?
I knew the Grip force and the Hold force when Cornering, so the performance is as per Image.
Was the installation difficult?
I applied it once by myself and it left air bubbles and came off, so I had PRO reapply it when I took the car to Coating.
However, even so, it seems that it was impossible to completely eliminate the air bubbles or wrinkles and apply it perfectly, and although there is no sign of it peeling off so far, it honestly looks bad.
It would be extremely difficult to apply it neatly to the curved surface of Tank without processing.
How was your experience with it?
So far there is no sign of it coming off.
Lines like Wrinkle also became unobtrusive Levels once you step away from them.
The Grip force is perfect, but whether it is good or bad depends on the person, but my thighs do not hit the Knee Grip Pad in Straight and normal Cornering without Hang-Off, because my thighs do not usually hit the position where it is attached.
When Hang Off, it hits the sticky thighs, but it can only be used there.
[Included Parts:were they on?
Comes with degreaser and Manufacturer logoSeal.
[Was there anything that disappointed you?
The first time I did it as a DIY project and thought it was my lack of skill because I failed, but I asked the store to do it for me and it was only slightly better and the manager "The curved surface of the Tank is too tight and this is the limit. I don't think it will ever come off." And that was just the minimum.
I thought, "What is the purpose of Exclusive Design for a car model if it cannot be applied neatly because the curved surface is too tight?
The solution was in someone else's Review, [Color] If it is not clear, but with color, the wrinkle will not be noticeable and will look beautiful.
Or you could cut and make it yourself.
As long as the wrinkle doesn't float and start to peel again, I will continue to use it, but if I have the opportunity to replace it, I will use the Black color next time.
View detail
not quite
No way, there is a round hole in it.
I can't believe they framed a Seal like Logo design's Cushion...
Low rating because the design is not good.
Grip is Normal I think it is. I think it's better than when I don't have it on.
Grip.
View detail
Fits: KAWASAKI ZX-6R
Of course. [Color] It's not Clear.
The Stomp Grip that I used to use had a strong aggressiveness to the Pants, so I used it because it was less uneven and seemed to be softer. The stability of the grip is good, but the feeling of the grip is too strong and it is difficult to fine-tune the position when attacking. On the contrary, it is very easy to ride in town and touring.
And, as Title says, it's more than you think. [Color] It's not Clear.
The original Tank may be too pure white, but the color like yellow blotch is quite noticeable like the picture.
I ended up ordering the Stomp Grip.
View detail
Fits: YAMAHA FZ-09 , YAMAHA MT-09 , YAMAHA TRACER 900 , YAMAHA XT1200Z SUPER TENERE
Meter Protection
It was easy to stick on, but the transparency was low.
The letters on the Meter are now hard to read.
View detail
I had no problems using it
I bought this product for the reason that it arrives quickly, but it's not a good idea to stick it to protective film on the surface upon arrival There was floating and flaking
There are some white stain-like scuff marks on the surface that can be seen on the outside, and there is no problem with use To be honest, I might not buy this product again if it goes bad
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
I can't grip it
Ninja400 (18) Attached to
The shape of the product itself was fitted in the shape of a tank, but I don't know if it's because I have a small pattern, or if it's because of the position of my knees and thighs The Knee Grip Pad didn't work at all
Height:169cm
Weight 55kg
For your reference, here's my height, etc
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Hey
You can not lick it
Weak adhesion at Level, but
I will buy the adhesive on my own.
Seal to peel off a little more
Who should think about it?
I paid 5000 yen and bought Garbage.
Tsuka MyMotorcycle
New Model ninja Add quickly
View detail
Fits: KAWASAKI Z1000SX
It was easy to paste
The product is Funafuna.
I guess what it is like on a hot summer day.
Since Body was Black, I bought Black, but it looks like a cumshot.
View detail
The color is dull
The color of the photograph seems to be a vivid black color, but the actual product was a color like dull black or gray.
I am sorry for the color that has already deteriorated.
View detail
No good
As it was with Clear, if you think it is transparent, thin red (It looks like a different from a hmm photo)
Once you open Package, a nasty smell unique to Rubber can not be said
I returned it by haste.
View detail