Reviews
Grip is good
Grip is good and can be held properly.
Double-sided tape does not have a bad bite, but the resin part tends to peel off easily due to temperature changes, etc., even if the tape is degreased properly.:When applying to Unpainted resin, it is better to use strong Double-sided Tape for Vehicleetc.
The Cut surface is standing up and may catch on the seams of the Pants. I used Cutter to cut off the corners.
View detail
I should have bought this one from the beginning.
I have been using the same manufacturer's vehicle-specific product, but I wanted to put a little more on the cowl to prevent scratches.
Another Quantity of vehicle-specific items previously:I had bought a set and installed it, but I thought it was a waste because I had some left over, and this time I had to replace the cowl because of an accident.:I was about to buy Set when I happened to find this product and bought it.
If I had noticed this last time, I would have bought it because it is less expensive and contains three types of Large size.
View detail
Used for Tank on Ninja1000sx
[How is it used?
The tank of the Ninja 1000sx is wide, so when touring long distances, the sitting position is inevitably shifted to the front. When I was riding Z650ABS, I used the same manufacturer's standard (black), but I was concerned about the floating of the glue, so I changed to SILICON this time.
Was the one you received as per Image?
Color is Color:It is so close to Gray that when attached to Black Painting, it looks like it is floating. It is not so bad once you get used to it, but I would have preferred a stronger black look.
How was your experience with it?
Functionality is fine. It has a firm knee grip.
[Points to note]
The location of the paste is unknown and must be confirmed on the ManufacturerHP.
How did it compare to other products?
I feel that the texture is not as good as the company's Standard, but it is supple and does not seem to peel easily.
Requests, etc. to Manufacturer
I noticed a lot of White paper dust on the product when I opened the product. Perhaps dust from clothes will also be a concern in the future.
View detail
It's a Universal Product, so there's no choice.
I would like to see a little more length, but the minimum area is covered, so that's good.
Even if applied properly, Air is hard to remain and has sufficient adhesive strength, but the color is not colorless, so Black may be less stressful.
View detail
Fits: TRIUMPH SPEED TRIPLE 1200 RR
Cheap ????.
The color may be translucent or Quantity:Pair (for Left and Right) The quality was disappointing for the difference in size and delivery time.
If you can afford it, buy it at a special price, it is a good one to prevent slipping.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
I'm glad I bought it
[How is it used?
I purchased this product to prevent scratches after delivery, but the knee grip is more effective than the actual scratch protection.
I'm new to wearing a Knee grip myself, and I'm so pleased with the effect that I'm bummed after installing it.
Was the one you received as per Image?
First purchase of the famous EasyGrip
The delivery time was a little long, but I think it was worth the wait.
When I open a new one, it smells like Rubber from a shoe store, I like myself Large.
Material is soft and nice to the touch
How was your experience with it?
After attaching the grips, I tried riding the bike, and wow! The knee grips were great. I have always leaned forward, so it was hard for me to ride for a long time or to make a sudden break because all the weight of my body would be on my wrists. After attaching this product, my knees became the fulcrum and the weight on my wrists was alleviated, and my upper body felt lighter.
Also, even when cornering, the knees are firmly hooked, so you feel as if you are one with the vehicle, without slipping.
[Points to note]
When pasting, please be slow
If you do it in a hurry, you get a lot of air, which is not aesthetically pleasing.
How did it compare to other products?
I can't say I've used any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
My Motorcycle is pure White, [Color] I thought Clear would be the best, but EasyGrip's [Color] Clear is a bit with-color or yellowish, so it stands out even if you put it on a normal white motorcycle. So, I think Black would be more suitable for White Motorcycle.
View detail
Excellent Material
[How is it used?
I bought this CenterTank Pad to prevent scratches on the Tank.
I regretted that I bought it so early because I didn't put anything on it at first, so it was damaged at the Center just two months after delivery and the gloss was gone.
Was the one you received as per Image?
There is something needed for installation, so it can be attached easily.
Package is also Green type, so Kawasaki users may be pleased!
Was the installation difficult?
It is just like a regular Sticker because you just paste it.
But since it is a Center pad, it is useless unless it is attached to the Center, so it is better to Center out.
It might take that long. After that, there was no problem when I applied it while slowly releasing the air.
Universal Product, so it can be used for any type of car.
How was your experience with it?
It feels like a proper anti-scratch expectation.
Material is also cool and full of luxury.
At first I was going to use a GSX1300R HAYABUSA OEMCenter pad, but it's big in the middle. "GSX 1300 R HAYABUSA" I just wanted something thimble, and since I also use EasyGrip's Knee grip, I decided to go with this one, partly because I wanted to unify the two.
[Included Parts:were they on?
Sticker or Alcohol Tissue.
I find it very convenient because it has everything I need for pasting.
[Was there anything that disappointed you?
No, I don't!
Perfection
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I chose EasyGrip to avoid corroding the Paint with poor quality glue, which inevitably leads to sunburn and deterioration due to UV rays in inexpensive products that often ruin the texture. I believe this will never be a problem.
View detail
Firm knee grip.
I was using KIJIMA's Tank Pad (208-006), but the surface was getting rough.
Replaced with EasyGrip Tank Pad.
PROSeries Black.
Since it was supposed to be for Circuit, I thought it would be better for other uses, but I bought it because I thought the finer grains would be less uncomfortable.
The location was at the bottom of the Tank and where the Side cover part fits.
I put it on this part with my own Seat.
result
There is no slippage at all, nor is there any unwanted snagging, allowing for a very firm knee grip.
View detail
scratch-resistant
It was put up to prevent Tank from being scratched. View detail
I knew it!
It is an unquestionable Grip feeling.
It increases stability.
View detail
Easier Knee grip
This will be a reReview.
Immediately after delivery, only the side cover was attached, but later the tank side was also attached because the legs hit the tank side when the vehicle body is supported by the outer legs with the ass shifted, such as when driving on a mountain pass.
The positioning was done without any particular instruction manual, and the position of the legs was determined by straddling the tank, making sure not to miss the point where the legs hit the tank, and fine-tuning the position so that the line of the tank would be consistent with the line of the tank.
As with the Side cover section, when attaching, peel off the backing paper gradually to prevent air bubbles from entering, and apply it from the center outward in a way that releases air.
Although I am rather clumsy, I think I was able to apply it reasonably neatly.
As a result of driving on the pass, the Tank was well supported during Cornering and had the expected effect.
Especially in the forward leaning posture of SS, it is somewhat easier to support the upper body by having a good knee grip.
As I wrote in my last Review, [Color] Even though it is called Clear, I am a little dissatisfied with the Cream coloring.
A little more transparency would be nice without destroying the design of the car body.
View detail
viscosity
When I remove the Cover during the next touring after applying the adhesive, the pad at the bottom is fluttering. Already no adhesion.
It was put on by a Shop Service person. I wouldn't write this kind of comment, but it's a pity that PRO put it on.
I'm wondering if I should buy the same item.
View detail
I have a good knee grip.
[How is it used?
Purchased because the tank was too large and difficult to grip by the knees.
I chose the Pro type because I thought it should look less lumpy.
Was the one you received as per Image?
I think it was as per Image.
I thought it would be like this since it is Rubber or Silicon.
Was the installation difficult?
A cleaning sheet before pasting is also included.
Size was also no problem, as it is dedicated to the car model.
How was your experience with it?
It is not rugged, but it does serve as a firm non-slip surface.
[Included Parts:were they on?
The cleaning sheet and Instruction Manual are included, but the Instruction Manual is only available in English version.
[Was there anything that disappointed you?
I think it is a little expensive, but I will use it for a long time, so it is OK.
View detail
Quality is better with Stomp Grip.
I had installed the Stomp Grip but the seat on the side cowl side was too small and didn't hit my knee area, so I left the Stomp Grip on the tank side as is and replaced it with the EasyGrip on the side cowl side. As other reviewers have said, the EasyGrip is a large size, and I am satisfied with its functionality, but the EasyGrip looks like it is cut out from a large Seat to fit the car model, but the StompGrip has no warts on the edges and is molded one by one, so the texture and appearance are parenthesis. The StompGrip has no warts on the edges and is molded one by one. It's a choice between functionality and appearance. View detail
Reliable EasyGrip
We used EasyGrip about 3-4 years ago when we switched from StompGrip.
Since then, EasyGrip has been my choice, and I personally think that EVOType has better gripping power than Stomp.
Recommended for people who drive on circuits and mountain passes, and for sports drivers.
View detail
Knee grip is easier and upper body fatigue is reduced.
I was going to use a Knee Pad to prevent slipping because my body shape is such that the Knee Grip is located at the side cover area, and I had used a Stomp Grip on my previous car and had a good feeling about it. However, the EasyGrip was selected this time because the range of the pad in the side cover was too narrow and it was not in the position I wanted.
Purchased PRO from shape etc. (Circuit) and the color should not spoil the Design as much as possible. [Color] I chose Clear.
I had compared the images with those of the G model up to the 2011 model, and I thought that there would be no problem installing it on the 24 model, and I was right.
Since there is no Instruction Manual for installation, I could not figure out the correct position to put it, but I put it at the position shown in the picture based on the Seat, Cowl shape, and the knee position when straddling the seat, etc.
Since there are protrusions on the surface and the Side cover is also in a phase, it is Large strange to install to prevent air from entering.
I felt like I peeled off the protective Seat on the back side little by little and managed to stretch it by pressing it from the Center toward the outside.
Despite these difficulties, the difference in knee grip between with and without the pad is enormous. Without the pad, I had to press my ankle against the heel guard to support my body, but now I can support my body at two points, my knee and ankle, which considerably improves my sense of fatigue even after running the same distance.
Currently, only the side cover portion is attached, but we plan to attach the tank side portion as needed in the future.
The only complaint is, [Color] It's a bit like Cream, even though it's Clear.
further [Color] It would have been better if it was Clear.
View detail
I love it!
I am satisfied with the outstanding Hold performance and the Large change! View detail
The price is reasonable and the effect is decent.
Each car is Exclusive Design, or the price is high.
However, considering the difficulty of installation and the effect after installation, it was a good purchase.
I think I did.
I have read in other reviews that the adhesion is weak.
If it is done, it will adhere properly to the tank and resin parts and is strong enough.
After installation, I drove the car and it was very easy to get a good grip on the knee.
Ride quality and operability have improved.
View detail
Prices are high for dedicated products.
[How is it used?
I used it for about 3 months. I am satisfied with the expected Grip effect.
Was the one you received as per Image?
I was torn between the EVO shape and the PRO shape, but I decided on the PRO one based on other people's impressions. I wanted to make the bumps less noticeable, and I also wanted to get the color of the car body. [Color] I chose Clear. A photo of the entire car body is attached for reference.
Was the installation difficult?
There may be some difficulty depending on the Tank shape of the vehicle. In my case, the tank shape has no gouges and is straightforward, so it was relatively easy. After temporarily attaching with paper tape, I peeled off half of the backing paper from the edge and patiently attached the tape. The first one was just a little off, but the second one seemed to grab the hang. The air bubbles definitely get in, but I think you can make it better by applying it little by little and getting used to it over and over again with your hands. (It will gap, so you have to pull it in the right direction little by little! Also, a rubber roller would be nice).
What is your experience and what is your disappointment?
Knee grip is easy. I am satisfied on that point, but there are two minus points:1. it seems to be a little aggressive on Jeans, and the fabric is a little fuzzy; 2. the price is too high; and 3.
A word to the manufacturer.
Please give me a few canned Sizes that I can use in Universal. Cut yourself.
View detail
Not slippery at all.
I would recommend this one, although the tank is slippery so I couldn't get a knee grip at all and was feeling a little stressed,
As soon as I put this product on, it stopped as if it was stuck and I was able to get a good knee grip! I was able to grip my knees with this product.
It is recommended because it stabilizes the driving.
View detail