Reviews
Rai TECFootpeg Kit
It is probably the highest level of footpeg that you can normally buy now.
Installation is highly accurate and goes on easily.
Changing positions is easy, but once you have decided, it seems unlikely that you will change it that much.
The non-slip footpeg is also foldable, but it has a rigid feel, and I thought this would be good for me, even though I like Fixed Type.
If you really want a Fixed Type bar, you can buy it with Option (and it seems to be a little cheaper).
I think 100,000 yen over is a bit expensive for a footpeg kit, but I would have to pay 70,000-80,000 yen at the lowest price to buy something else, so I think it is not that expensive considering the difference.
Overall, I am satisfied with Large.
View detail
Fits: YAMAHA TRACER 900, YAMAHA XSR 900, YAMAHA MT-09, YAMAHA MT-09 TRACER
Genuine Lightech MT09 Chain Adjusters
Looking at getting a set of these for the wife's MT09 bike but in the UK there are not a lot of dealers that actually stock for the this model. I found these on Webike which was a total fluke. I found the correct part from Lightech's own website and got the correct number for the MT09. The wife asked for blue but I changed her mind and then went for black. Keep it nice, clean and neutral looking. The price from Webike was very competitive and around the same as I have seen elsewhere in the UK if there was available stock. Along with a few other parts in the basket, I usually save some as they are what I use frequently. This meant the shipping cost was lower for multiple items and saved me some money. EMS fast is the courier I use as they are by far the best option for me right now. They delivered my order in 5 days from placing it. The space, if any, inside was filled with bubble wrap and air pockets. The outer box was sealed. I had a few smaller parts and some weird shaped ones, this meant nothing could get damaged with movement in the box in transit. Very good idea guys. Upon delivery, the adjusters look absolutley amazing loveley satin black finish and all the adjuster parts are smooth and not creaky like some I have had before from other brands. I have had experience with Lightech adjusters before and I really do like the mechanism of the actual adjuster, very slick. There is a nice lock grub screw on the under side of the rear adjuster, don't forget to loosen that or you will have many issues. Really easy to adjust the chain with these. The adjuster mechanism has a nice click for each notch. You can get so much more accurate results with these than the stock ones fitted. I even double checked with a laser to see how accurate they were, spot on. So, very happy customer and thank you Webike for the great services you provide. View detail
Genuine Lightech adjuster for R1M
I was looking at getting a set of these for the R1M bike but in the UK there are not many places that actually stock for the new model. I managed to find these on Webike which was a total surprise but in a good way. I found the correct part from Lightech's own website and fgot the correct number. Although I was going to go for the red, I eventually decided on the black. Keep it nice and clean looking. The cost from Webike was very competitive and around the same as I have seen elsewjere online. I had some other parts in the basket which are usually saved as they are whay I use most often. This meant the shipping cost was lower for multiple items and good for me. EMS fast is the courier I used as they are by far the best option for me right now. They delivered my order in 5 days from placing it. The outer box was sealed and the space if any inside was filled with bubble wrap and air pockets. As I had a few smaller parts and some weird shaped ones, this meant nothing could get damaged with movement in the box in transit. Very good idea guys Upon receipt, the adjusters look absolutley gorgeous, loveley sating black finish and all the adjuster parts are smooth and not creaky like some I have had before from other brands. I have had experience with Lightech adjusters before and I really do like the mechanism of the actual adjuster. There is a nice lock grub screw on the under side of the rear adjuster, don't forget to loosen that or you will have many issues. Really easy to adjust the chain with these. You can get so much more accurate results with these than the stock ones fitted. I even double checked with a laser to see how accurate they were, spot on. So, very happy customer and thank you Webike for the great services you provide. View detail
Genuine Lightech Chain Adjusters for MT10
I get so annoyed when trying to adjust the chain by using the Yamaha fitted stock ones. Honestly, they are not always 100% accurate and wanted something I know is easy to use, easy to adjust and no misinformation each side. These are what I went for. The Lightech brand are some I have used many times before and only recently started adding them to the Yamaha MT10. I found the part number relatively easily via a UK site. The cost was pretty similar to what I can source locally but again, the gold version was out of stock at my usual supplier. Generally, I have more than one item in each order and try for at least 10. This then custs down on shipping costs as it is spread over so many items. The shipping goes on a point score, which sometimes can be a little weird as some parts that are really small and light are sometimes more points than say something like these. Anyway, I opted for teh EMS fast service. Very good value. All my order was packed shipped and arrived at my door in 5 days. Even though there were some weird sizes and wights of parts in this order, Webike made everything fit correctly inside and even padded out any space with bubble wrap and air pockets so nothing could get damaged in transit. It's not always how the courier handles the package but how the warehouse pack items. Nothing could move much at all in this order and that meant, no damage or anything.Very impressed. The adjuster themselves are a stunning piece of kit. I have already tried the Gilles TCA adjuster on other bikes and to be honest, I think Gilles overthought the TCA ones, the grub screws were tiny and not great. The should have stuck to the KTS version. So, this is why I went for the Lightech option. Very straight forward, not tiny little grub screws to contend with and they just work. Fitted pretty easily, if you know what you are doing. These are smoothly finished and the anodizing is gorgeous. All the thread on the bolts are nicely finished with no burrs. The mechanism for adjusting is smooth asa silk. Great once they are fitted as there is minimal effort to adjust your chain correctly. I did forget, there is one small grub screw. This is the one that stops the rear adjuster bolt from moving but that's about it. I love these adjusters. Makes my life so much easier when it comes to maintenance. Thank Webike for the effort you put into each order. Thanks you!! View detail
Rear Sets
I saw the Design and decided to go for it.
The design and precision of the carbon heel guard and Step barz Red are fine.
Position has a considerable range of adjustment, so trial and error was fun.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-636
Italian design
I don't particularly run Circuit, but I fell in love with the design at first sight and bought it.
The following two points should be noted when installing on the 6R.
The diameter of the pin connecting the Brake lever to the Master Cylinder does not match.
The instruction diagram says to use the OEM pin, but the hole on the lever side is slightly small in diameter and will not fit. I had no choice but to use m8 Bolt and Nut to fix it.
The distance between Brake switch and Lever is too far and Hook cannot reach.
This one also says to use the OEM Switch and Hook, but I can't reach the Lever side even if I lower the Switch to its Largeest and raise the Lever to the limit. I extended this one with the Ring of the Key Holder and installed it.
Is there a difference between ItalySpec. and Japanese specification? It is a little disappointing since the price is reasonable.
I was worried because there is no return spring on the brake side, but I can use it without any discomfort.
View detail
Fits: HONDA CBR 1000 RR-R SP, HONDA CBR 1000 RR-R, HONDA CBR 1000 RR-R, HONDA CBR 1000 RR-R SP
trustworthy
Installed on a CBR1000RR-R SC82.
LighTech:The footpegs of LighTEC products are small, but they have a strong anti-slip coating.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, BMW S1000RR, HONDA CBR1000RR-R SP, KAWASAKI Z1000, KAWASAKI ZX-10R, YAMAHA FZ6, YAMAHA FAZER 600, YAMAHA FZ8, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA YZF-R6, BMW S1000R, HONDA CBR1000RR-R, KAWASAKI ZX-6R
I think it's good
Installed on a CBR1000RR-R SC82.
LighTech:LighTEC products are nicely made, but this Bolt does not have a lock nut, and sometimes needs to be retightened.
View detail
Convenient
I don't see many motorcycles with LighTech:LighTEC, but I think LighTech:LighTEC products are good in design and functionality.
Chain adjustment can be adjusted well.
View detail
Great product
Makes chain adjustments a breeze - just loosen the axle and give one click to each adjuster and re-tighten axle. Job done. Product is very well made and I will be putting them on all my future bikes because of how easy it makes adjustments. View detail
Accurate chain adjustment
Chain Adjuster itself is easy to adjust accurately and quickly, although few manufacturers offer Aftermarket parts.
And the Anodized process is beautiful and I fall in love with it every time I look at it from the side
View detail
Fits: YAMAHA TRACER 900, YAMAHA XSR 900, YAMAHA MT-09, YAMAHA MT-09 TRACER
It looks and performs well
The OEM Chain Adjuster was purchased because the scale is too sketchy for Large to adjust
The quality of Rye TEC's products that I used to use in my GSX-R1000 was good, so the MT09 was also made by this Product
Installation is easy if you have the ability to remove the rear tire
Remove the Axle Shaft and remove the OEM adjuster and install this product on the adjuster Just fix it in the bolt hole, it takes about 15 minutes! 。
The quality is as good as Lai TEC is easy to adjust because it is fine in 0.25mm increments
The problem is the delivery date, and since it is an import from Italy, it is affected by Corona, and the original delivery date was It took us three weeks to two postponements and ended up taking two months 。
View detail
Best gem
The adjustment of Chain will be easier like an idiot. More accurate.
More than anything Made in Italy. Beautiful as a work of art until the details. It is a gem you want to put on by all means.
I feel a little high, but I am convinced if this can be done.
View detail