Reviews
It is inexpensive and Parenthesis is good!
I wanted a closed type hand guard, and at first I was going to buy a ZETA, which is available only for car models, but I was hesitant because of its high price.
After much thought, I remembered this product that I use in my SUPER CUB, and when I checked the price again, I was astonished at how inexpensive it was and purchased it immediately! (Lol)
SUPER CUB is in Black, but CRF is in White.
The hand guard itself was not a simple installation, but rather a simple cut where the brake hose interfered. The holes for the handlebar clamp did not fit.
The material is soft, so processing is not a pain.
It is inexpensive, and if you like the shape, you can buy it on the assumption that it will be processed.
However, if the purpose of attaching a hand guard is to protect against wind and cold, we recommend that you purchase a larger hand guard.
As for me, I like it very much... ♪
View detail
Mounted on EC250 MY2023
I bought this for my GasGas EC250 MY2023 which I always use for forest road touring.
When I ride on the course, I remove the headlight because it is a source of unnecessary trouble, and I ride my motorcycle with this Number Seal installed.
Since the headlight can be removed, there is no light unit, which reduces the weight and makes the handlebar feel lighter.
Also, it is a nice point that the unevenness of the surface is reduced compared to when Headlight was installed, making it harder for branches to get tangled in the woods, etc.
Also, it is a good point to be able to put a Number Plate on the Race.
View detail
Fits: GASGAS EC250, GASGAS EC300, GASGAS EC250F, GASGAS EC350F
Installed on MY2023 EC250
I bought this for my GasGas EC250 MY2023 which I always use for forest road touring.
Since it is used for slightly intense forest road touring, the exterior is quickly falling apart.
I always buy the Exterior Kit from Poly sports because I can buy the whole set at a very reasonable price.
The quality is no different from OEM products, and there is no tendency to crack, which is common with Chinese plastic parts, making it very useful.
View detail
Polisport Radiator Shroud Set for CR125R 2001
This was a set of radiator shrouds that needed replacing for wome new ones as the old ones had a lot of damage from rocks etc. I decided on the Polisport ones as I have used them a few times before and have had good experience with this brand. The radiator shrouds were pretty good value and are cheaper than some of the other alternatives out there. With a few other parts in my order, all were shipped together to save some costs. My order was delivered by EMS and took 5 days to arrive. The shrouds arrived in the Polisport packaging and were surrounded in buibble wrap to keepo them from sustaining damage in transit. The shrouds are made from a strong plastic material and are pretty robust and strong. There is a bit of flexibility so you can sit them fairly easily. I would recommend this brand for off road bike body work as they are cheap enough and last a while. The quality is really good and I found no flaws at all. Very pleased after fitting and the bike looks a lot more appealing now. Thanks Webike. View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ125, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX
Purchased White for Decal paste
I bought White to match Decal. 。 The OEM YAMAHA Logo has a convex shape, but this one is plain and can be applied cleanly.
Relief shape other than Logo and others are similar to OEM!
The OEM did not think anything of it.
It goes on easily, but I wonder if the Body of this one is slightly deformed.
Hole position did not match Exactly.
Screw one of the first three holes at the end, and the other holes are used for the Body.
The holes were aligned as if they were pushed in or aligned with each other, and the screws were inserted into the holes without any problem.
Be careful not to insert the screw into the gapped hole by force, as it will enter the screw at an angle and damage the screw threads on the fork side.
There is no distortion after installation, and the gap between the Fork and the Fork has been properly taken care of.
View detail
It was cheaper than OEM.
The exterior is covered in wounds and is starting to look shabby.
When I was wondering what to do with it, it was about 2/3 the price of the OEM Kit.
This one was sold at a great price, so I decided to buy a set of Quantity.:Refresh with Set.
The important thing is the installation, but the mounting holes are slightly out of alignment.
Some parts were not as readily available as OEMs.
Specifically, the Front Fender has two of the four holes slightly enlarged Large,
OthersShroud manages to stop at one place while pulling the others,
Fork Guard is the same way, with the same order of stops and other innovations.
We managed to attach it without any processing.
Shape is the same as OEM, but material is used for mounting.:Plastic colors are used, and they are not exactly the same.
It's not hard to modify the installation to some extent.
I thought it was for people who wanted to raise the price cheaply.
View detail
For Silencer protection
I have always enjoyed forest road touring with gasgas EC250 as a hobby.
It is an application that sometimes runs a little HARD.
This time I bought it with the earnest desire not to add any more scratches to Silencer.
Installation is done by pulling as hard as you can on the Rubber loop.
It requires quite a few parents.
It is cool as a Design, and it Guard Silencer well as a Protector.
I was a little disappointed that it slides and moves when the light is actually turned on, and at first I was concerned about it and had to change the position of the outlet of the exhaust system every time. Recently, I have come to think that it is fine as long as it is on, and I use it as it is without fixing it.
I think it is difficult to increase the number of scratches on the Exhaust System.
I want to remove it when I get good at it.
View detail
Racer is the face of TRAIL
I purchased the Racer to make it a public road Spec.
To secure it in place, it is fastened to the front fork using the included band. The overall texture is good, and the wiring and detailing are sufficient.
If I had to say so, I would have preferred not to put the Poly sports sticker on the Number Plate side. If it is attached separately, I can put it wherever I want.
View detail
![Tail Lamp Hologated (Rear Light & Stop Light)[HOMOLOGATED TAIL LIGHTS(rear light+stop light)]](https://img.webike-cdn.net/catalogue/images/13445/8569500001_TS.jpg)
Fits: Others
Space under Light is ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
A License Plate is attached under this plate, but the area seems to be a little narrower. Perhaps it is the difference in shape between the Japanese number and the European number.
The performance of the Light itself is fine and bright enough.
Also, the size is more compact than expected.
View detail
Fits: KTM XC-F 250, KTM SX-F 450, KTM SX-F 250, KTM SX-F 350, KTM SX 150, KTM SX 125, KTM XC-F 350, KTM XC-F 450
To replace Exterior Set
If the exterior cracks, it can cause unexpected injuries in the event of a fall, etc., so we replace them on a regular basis.
I like it because the quality is the same level as OEM parts, but it is much cheaper than OEM parts.
View detail
Poly sports exterior
The hole to insert the washer is generally small. I went to Smooth for installation. View detail
No complaints at all so far.
I installed this bike for Enduro race on my KLX230R. it is fixed in two places at the handlebar and bar end to protect my hand and lever. the material is plastic and there is no gold frame, but I have used it for about 2 years and there is no trouble such as lever breakage. There is no trouble such as lever breakage after about 2 years of use. Since it is a universal product, it is necessary to cut some parts of the frame to make it fit perfectly, which is a little time-consuming. However, since the material is plastic, this is relatively easy to do. View detail
Fits: HUSQVARNA FE501, HUSQVARNA FE250, HUSQVARNA TE300, HUSQVARNA TE150, HUSQVARNA FE250-501, HUSQVARNA TE150-300
As Repair Lever
[How is it used?
I play mainly in Enduro race with HUSQVARNA TE250I.
I broke the brake lever during a practice run.
Pivot Lever Purchase
Was the one you received as per Image?
Installation can be easily done without removing the OEM lever.
The texture feels a little cheaper than previous Aluminum models, but it feels good to hold.
It was a little more Short lever style than OEM, which was surprisingly good for me.
I think this will alleviate the worry of it breaking in the event of a fall, but I haven't fallen over it yet, so I'm not sure how durable it is.
View detail
Fits: YAMAHA YZ, YAMAHA YZF, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX
It has become a must-have item.
The shape is OEMLever itself.
The rigidity of the lever itself does not have any strange rattling, and it feels just like OEM.
Bottom line. Unbreakable." It works well enough as far as I'm concerned.
Bent Levers need to be put back by hand, but this should not be a problem for the average adult male.
There is probably nothing that surpasses this Lever in terms of cosmetics.
It's a good product
View detail
No longer a standard product
The Poly sports headlight has become a staple of Offfor Vehicle headlights.
Similar products are sold at low prices on Amazon, etc., but I have the impression that the difference in price is directly connected to the difference in quality.
In addition to the Rubber Mount that wraps around the Fork, two types of Brackets for adjusting the Headlight position are provided for installation.
View detail
Can not be installed
To install, a screw-in StraightSocket covered by a Rubber Bush is inserted into the hollow hole in the Pivot shaft of the Swing Arm, but the K7 uses a Quantity:Pair (for Left and Right) The Brake Side (Right) is too small and cannot be installed because the attached parts are of the same size. In addition, it is thought that a new car can be installed, but in the case of my car with rust and dirt adhering to it, the Shift Side (Left), which is thought to be the same size, could not be inserted either.
Although it can be machined and installed, it is recommended to use another Manufacturer's
View detail
WINnedProtector is easy to lose.
Total Material as well as KTMOEM:I like that it is Plastic.
We feel that it is moderately strong and supple and will be the first source of Damage in the event of a fall.
The problem is that the Black WINDProtector can be easily blown away by a Bush or tree branch and lost.
Grip end fixed Guard in general, but it is inconvenient that you can't hang a little Helmet on the Grip.
View detail
Genuine Polisport Frame Protectors for CRF250R
As this bike does take a lot of stick when it comes to being ridden in bad conditions, the purpose here was to get some better frame protectors. I have personally never used Polisport before but the customer specifically asked for this brand. Finding the part was not difficult at all as Polisport search function is really simple to use and you are greeted with what ever part is needed. The price from Webike was good value as they were actually in a sale at the time of ordering. I do have always some other parts to order so got them all shipped together via EMS. My order arrived very well packaged and 100% perfect condition. The frame porectors themselves a re a nifty piece of work. They are really a really tough rigid plastic composite but have a small amount of bend which makes this easy to fit. The finish and quality of these frame protectors is excellent as far as I can tell. They have a smoothed out matt look which works very well with the bike colour scheme. They attach pretty easily with the cable ties already included. If you wanted to go more permanent you could bond them on but cable ties for if you ever need to change them. Very pleased with this purchase and will look at Polisport in the future for other bikes if needed. Thanks Webike. View detail
The quality is still different.
I have previously purchased a cheaper CHINA Exterior Kit. The quality and texture has improved a lot recently, but there are still some problems with the mold or the finish, such as bali, sagging, and deformed holes.
Poly sports' Exterior Kit has none of these problems. The exterior kit is beautifully finished in all areas and can be installed without any worries at all.
I am not too concerned about weather resistance for Motocrosser use, but what about TRAIL?
The Decal Kit will be applied immediately after installation, but it looks fine in terms of texture.
It is not surprising since the company also undertakes OEM for Manufacturer, but from User's point of view, the price is low and it is very helpful.
The fitment is listed as CRF450RX, but CRF250RX is also common, so it is used as is.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
Easy to install! Fit securely!
Installation is very easy, just tighten with Tie Wrap.
The brake hose is also cut to fit beautifully. The Swing Arm is now well protected and secure.
View detail