Reviews
Fits: KTM XC-F 250, KTM SX-F 450, KTM SX-F 250, KTM SX-F 350, KTM SX 150, KTM SX 125, KTM XC-F 350, KTM XC-F 450
To replace Exterior Set
If the exterior cracks, it can cause unexpected injuries in the event of a fall, etc., so we replace them on a regular basis.
I like it because the quality is the same level as OEM parts, but it is much cheaper than OEM parts.
View detail
The quality is still different.
I have previously purchased a cheaper CHINA Exterior Kit. The quality and texture has improved a lot recently, but there are still some problems with the mold or the finish, such as bali, sagging, and deformed holes.
Poly sports' Exterior Kit has none of these problems. The exterior kit is beautifully finished in all areas and can be installed without any worries at all.
I am not too concerned about weather resistance for Motocrosser use, but what about TRAIL?
The Decal Kit will be applied immediately after installation, but it looks fine in terms of texture.
It is not surprising since the company also undertakes OEM for Manufacturer, but from User's point of view, the price is low and it is very helpful.
The fitment is listed as CRF450RX, but CRF250RX is also common, so it is used as is.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
Easy to install! Fit securely!
Installation is very easy, just tighten with Tie Wrap.
The brake hose is also cut to fit beautifully. The Swing Arm is now well protected and secure.
View detail
Fits: BETA RR125 2T, BETA RR200 2T, BETA RR250 2T, BETA RR300 2T, BETA RR350 4T, BETA RR390 4T, BETA RR430 4T, BETA RR480 4T
Exterior is expendable.
I purchased this product to replace a skinny exterior that was used on Race. Since it is a vehicle specific product, the installation went smoothly and the fit was perfect.
Since the exterior is Plain, it is recommended to purchase Decal and paste it.
Depending on the strength of the Decal to be purchased, the exterior itself may be strengthened.
It is better to wash the exterior with Sponge detergent before attaching Decal. (If it's new, it will be oily.)
I've bought it 4 or 5 times now and it's a great product.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 450FX, YAMAHA YZ 250F, YAMAHA YZ 250FX, YAMAHA WR 250F, YAMAHA WR 450F
I think it's good.
[How is it used?
Forest road Gare
Was the one you received as per Image?
as it is (i.e. now)
Was the installation difficult?
Easy
How was your experience with it?
It serves its purpose.
[Included Parts:were they on?
It comes with Sponge as a buffer.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Bolt holes match, so it is possible to mount the bolt.
[How is it used?
Last 2CycleMotorcycle of my life!" KDX220SR was purchased used with great enthusiasm.
Since the vehicle is over 20 years old, it is inevitable that the exterior will become crusty due to UV rays and age-related deterioration.
Since the design of the Front Fender has almost no connection with other refurbished panels, we dared to purchase and install a product with the same design as the current Kawasaki off-road model, regardless of the design at the time of its release.
It may not be suitable for those who want to finish with OEM parts of the time, but I personally feel no discomfort, and I think it was a good purchase because it is difficult to be distorted by wind pressure while driving and the handlebar is not taken off while driving on the highway.
Did you receive the item as per the Image?
The product was exactly as shown in the Image because I had to confirm that it was the same design as the vehicle currently being discussed by Kawasaki.
Was it difficult to install?
It is an extremely simple job, simply remove the four Front Fender mounting bolts that were originally installed, remove the wires, and then install them in the reverse order.
How did you like it?
There is a gap of more than 20 years between the exterior design of the Front Fender and Others installed this time, but I personally do not feel much discrepancy.
Is this because it is not installed consecutively with other exterior parts as mentioned above?
I don't know if it's because I'm replacing the light cowl with a product from another Design company. (OEMLight is too dark and has been replaced with a light cowl that can be fitted with H4Type Valve). 。
Ultimately, if the owner likes it. (This is based on the assumption that Large is not a nuisance to those around you.) I don't see any problem with what a third party can say.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Front FenderBody only, no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing personal, I am Large satisfied because I was able to purchase a product of the same design for a little less than OEM Product.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." So I don't think Instruction Manual is necessary.
[Notes]
Nothing in particular, if it is an Other Brand Product. Screw holes won't fit." However, this product has no Bolt hole gap and can be assembled without any problem.
The bolt holes are slightly wider to allow some forward/backward movement for balance adjustment. "Temporary group." I would recommend that this fixation be made from
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to Stock items that can be replaced while they can be purchased and parts that may need to be replaced in the future.
[Opinions and requests to Manufacturer
We look forward to a long and continued Lineup.
View detail
CRF250L with a pontoon
I bought this product because I wanted to put together the cowl and other parts of my CRF250L in White. I had bought the same product in Red before, so I knew I could put it on my CRF250L, so I chose this over the more expensive OEM.
Since it was originally designed for CRF150L, there is a gap under the headlight, but I think it looks good.
View detail
Used on crf250rally
I had a large scratch on the Swing Arm when I ran in a gully with another vehicle.
I purchased this product to reduce scratches as I have just switched vehicles.
The vehicle is CRF250RLYInitial Model.
Installation is easy
It can be installed without removing the shaft of the rear tire.
If you are not familiar with it, it is easier to remove just the nut for the Right Side Shaft.
CRC556 is also good.
The bolt to stop the chain case is too short for the OEM product. A bolt with the same pitch but 5mm longer is required.
Merit can reduce the number of scratches in the galleys.
Demerit will get sand in it, so slips will be made.
I am happy with my purchase.
View detail
Fits: HONDA CRF 450R, HONDA CRF 250R
It was a great deal.
I was looking for a color change, and I found an exact product and bought it immediately.
The Fork Guard was also included and was a really good value for the money.
View detail
Fits: BETA RR 480, BETA RR 300, BETA RR 350, BETA RR 250
Necessary Items for Off-road
I have been using it for a while and replaced it with a new one. View detail
Quality is good
Used in 2016 YZ250F.
New new for 2023.
This is my second purchase.
This time it was on Sale for 12970 yen.
It is attractive to be able to get them at this price compared to OEMs.
However, the delivery time took about two months due to the current situation.
If Fork Guard Plastic is also included, full marks.
EachPart is individually packaged.
I stuck Decal on it as soon as it arrived... ♪
View detail
Fender, full of Wound, was replaced with this one.
The OEM Front Fender is over 10,000 yen, so I decided to go with the less expensive polisport Universal Product. The quality of the product is better than Large.
Surprisingly, it could be installed without any modification. 1cm spacer was inserted in the 4 screws to complete the installation.
SEROW Hook and Quantity to Fender extending from Headlight cover:I have 2pc's plugged in, but there seems to be some interference.
I did not process it because it was not a concern.
The front length is a little shorter, but the rear frame side is not a buttstock of the OEM, so it looks more like a parenthesis.
View detail
Fits: KTM 450 SX-F, KTM 450 XC-F, KTM 250 SX, KTM 250 EXC-F, KTM 250 EXC, KTM 200 EXC, KTM 150 XC, KTM 150 SX, KTM 125 SX, KTM 125 EXC, KTM 350 XC-F, KTM 350 SX-F, KTM 350 EXC-F, KTM 300 XC, KTM 300 EXC, KTM 250 XC-F, KTM 250 SX-F, KTM 250 XC, KTM 500 EXC-F, KTM 450 EXC-F
I have no problem installing it.
I installed it on a '21 250exc and there was a small gap between the air cleaner box and the outlet for drainage and Garbage.
I repaired it with Tape because I didn't want the water to come up to the Air cleaner when I wash my car.
It is functioning as a mud guard from the original Rear tire.
Good for Orange lovers as long as you don't mind a few gaps. (^^)
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250F
Cheap and reliable
I purchased this as a practice exterior.
It is a good product with excellent cost performance.
OEM at the same price, Quantity:Pair (for Left and Right) You can only buy about Number Seal Cowl.
View detail
ส่วไว งานดี มีคุณภาพ สวยงาม สินค้าดี ถูกต้อง แพ็คของได้ค่อนข้างดี View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
MY2023 for YZ125X
I had been using the same product on my YZ250FX, so I was torn between it and ACERBIS Magnet type, but I decided to go with this one because of its cost performance and reliability.
Installation is simple and is secured with the included thick Tie Wrap.
If mud gets into the swing arm, it can cause minor scratches on the swing arm, so it must be removed and cleaned periodically, such as after a muddy ride.
This may not be necessary for Motocross, but it is essential for Enduro if you do not want to make the Swing Arm too skinny.
View detail
For MY2023YZ125X
I purchased this for my new MY2023YZ125X.
Considering the reSaleValue, the new exterior was immediately replaced with this exterior.
Installation was completed in a straightforward manner with no modifications.
I thought Polisport had a slightly larger margin of error than ACERBIS, but it is no longer comparable.
The price is also lower, so if you are not picky, this one should be sufficient.
View detail
สวยครับมาก verry good ส่งรวดเร็วมาก สีตรงกับรถ View detail
Poly sports SM Fender UFX Front Fender
I was looking for a short fender to MOTARD my crf250ls md47 and found this product!
The fitted look was perfect!
I'm glad I bought it!
View detail
POLISPORT SM Fender UFX Front Fender
I was looking for a short fender for my CRF250ls to be MOTARDed and found it.
When we installed it, it looked perfect.
With other Fenders, there was a gap between the headlight cowl and the headlight cowl when installed, which was subtle, but this one was shaped to fill the gap nicely, just like the Image.
View detail