Reviews
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
Fits: KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KL250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX250, KAWASAKI KX500, YAMAHA WR250Z, YAMAHA YZ250, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KDX200, KAWASAKI SUPER SHERPA, KAWASAKI KLX250R (for competition)
DRCFront sprocket
It was just the right size. This is also adjusted by Rear sprocket. View detail
Fits: KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI Z250 (2013-), KAWASAKI Z250SL, SUZUKI 250SB, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI D-TRACKER-X
DRCFront sprocket
It was just the right size. Now I will adjust it with Rear sprocket. View detail
Fit to Rim
Fit feeling to the rim is also good. It can be tightened.
I happened to find this product and bought it.
I think it was good.
Installation is no problem, just insert the Bolt when fitting it.
I hope it works for mud intrusion and such.
It looks beautiful and I recommend it.
View detail
Replaced because the OEMBlinker can't tell it's blinking in the daytime.
[How is it used?
It became difficult to tell if the OMBlinker was deteriorating over time or if it was blinking in the daytime. This is dangerous. So we decided to replace them with LEDs.
I chose this one because it seems to be for Off-road.
The Relay has already been replaced with an LED-compatible product, so this is the only purchase.
Was the one you received as per Image?
It is hard, although it is described as Rubber-like.
Was the installation difficult?
The work itself is not a problem, but the RightHand guard of our car is distorted, so we had to use the enclosed Attachment parts to make it slant down! (Sweat)
How was your experience with it?
It is brighter and easier to see from oncoming cars, etc.
View detail
I like this one.
I use this one every time.
In this case, it is used for yz85 Silencer.
It is a moderately sized product, but it is Large sturdy without wrapping all the way around.
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
If you want to use footpegLarge, this is the way to go.
Product Name
DRC DRC Chromoly Wide Foot Peg
Item Number
F6245
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
20 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
If you want cheapness and sturdiness with a Large cutoff, I went with this. I also chose this one because it is called DRC.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It may be difficult to go alone, but I think I can go Limit with this...I have to make sure to stop Pin well.
How was your experience with it?
I feel that the footpeg is different when the footpeg is large. Also, the black color is cool.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DRC wheel tool anti-vibration/balancer option 10mm shaft set Product # F4287
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
For use with the 3RW1 that is not the appropriate model year (but requires modification).
Compared to NORMAL, the large size of the footrest surface is obvious.
It is stable, but its thorns are sharp and long, so please use it with hardy boots that can shave off the Sole.
When used in 3RW, the Right Side must be considerably reduced to be able to be overthrown.
And even if it is installed after much effort, the rattling is so great and the return in collapsible mode is so weak that further modification is required.
If you are concerned about the details or if the modification is troublesome, you can install the expensive Bolt On. "ARE" is probably a good idea
View detail
Tandem seat can be installed with Compact
The paint texture is also high, making it Compact and Stylish.
I am satisfied with the rigidity of the Carrier and its use for Tandem.
View detail
Required Option
This is a required Option when purchasing Carrier.
It would be nice if it could be Carrier's Standard Equipment product if possible.
View detail
Fits: KAWASAKI KX100, KAWASAKI KX60, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, YAMAHA PW80, YAMAHA TT-R110E, YAMAHA TT-R50E, YAMAHA TT-R90, YAMAHA DT50, YAMAHA YZ60 81-84
Used for KX112
Used for KX112. The finish and accuracy are sufficient for my needs, and now I can use it on the Enduro. View detail
I like the Bearing.
[How is it used?
I was washing my car after Race and it was run out of the house, so I bought it.I could have bought OEM, but I chose this DRC Chain roller, which was in immediate delivery.
The OEM chain roller is just a rubber with a steel spacer, but this one has a bearing, a hard material like DURACON, and a variety of colors, which I recommend. I wonder why OEMs don't have Bearing in their rotary products?
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is not particularly difficult.
How was your experience with it?
It is still a good point that Bearing is firmly attached to both SIDE.
It's nice to be in One Point's colors again.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
None in particular. I'm a Repeat buyer because I know it's quite durable.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Lock nut is a must because it tends to loosen easily~. Also, measure the OEM size before you buy. If you drop it, it is not a good idea to buy it anyway.
Size:L Roller diameter:42mm is here (https://www.webike.net/sd/9398500/)
View detail
Roughness is noticeable but sufficient Level
The end of the cord is divided into a Headlight wire and a Connector that holds together the OthersBlinker and other components.
It looks like Gold genus and is a bit heavy.
Blinker also has a slightly unique switch. Normally, the switch can be returned to the center position by pressing it lightly, but this switch will not return. You need to return it to the Center position by yourself. It is so difficult to return that the opposite Blinker will be attached if you do not press it with a good degree of force.
View detail
Horn.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
If you energize it and turn on the Switch, you can use it normally.
The volume is also sufficient.
View detail
It is quite convenient to have it in Single Body.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
This will bring together the electrical system for the time being.
The terminal connections are in good condition and are securely fastened with Heat Shrink Tubes, so they appear to be water resistant.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail