Reviews
I was able to replace it properly.
I had a DRC Chain tool in the past, and when cutting a 428 chain, the tip of the tool broke off and I had trouble replacing it, so I was distrustful of this manufacturer's products.
This time, I decided to buy it after seeing other people's impressions and videos that seemed to work, and after considering the labor cost to ask the shop to do it.
I started with Chain cut to replace the 520 Chain and was able to cut it with no problem at all.
The work proceeds according to the instruction manual and is completed relatively smoothly until the Plate is press-fitted.
The last Crimp work, the Body is a little smaller than the Material.:Although it was light for aluminum and required considerable force, we managed to install Crimp.
I think it is a great product that can do everything from cut to crimp with just one tool. The size is larger than the previous version and I think it is stronger.
If you want to replace the Chain and Sprocket by yourself, we recommend this product because it is reasonably priced and works well!
View detail
Good quality, good price
Old rim lock disintegrated and needed a new one. This is almost identical to stock and fit exactly as it should.DRC rim lock is as good as any other rim lock. It weighed considerably less than what I was expecting.I always choice zeta, really quality parts and the best price Easy install but make sure you balance you wheels. View detail
Way better than rubber rim strip
This makes life so much easier when changing tires. I no longer have to worry about the rim strip moving on me when trying to put the tube in. I like this better than the rubber cover that wears and slides off the spoke ends. You have to clean the rim very well, I use brake cleaner. I change tires a lot and these have been working great. Rubber strips leak, some other strip tapes did not hole up as well. I'll use this again. Worth the extra money.i definetly recommened. View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Nice simple solution
much better than using sealant or silicone if you forgot, like did, to fill the rim lock hole before installing tube and tire. Nice simple solution for plugging the extra hole when 2. rim locks are not used.Using these to plug the extra hole in a rim makes the job easier and looks like it came from the OEM. These may be little things, but it's the little things that count to finish a job correctly. View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
Roughness is noticeable but sufficient Level
The end of the cord is divided into a Headlight wire and a Connector that holds together the OthersBlinker and other components.
It looks like Gold genus and is a bit heavy.
Blinker also has a slightly unique switch. Normally, the switch can be returned to the center position by pressing it lightly, but this switch will not return. You need to return it to the Center position by yourself. It is so difficult to return that the opposite Blinker will be attached if you do not press it with a good degree of force.
View detail
Horn.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
If you energize it and turn on the Switch, you can use it normally.
The volume is also sufficient.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
Often used in racing vehicles.
Open valve pressure can be increased to 1.6 kg from OEM.
Recommended for harsh environments like Race.
It can reduce the likelihood of Overheat.
When I hear DRC, I think of Off-road Image, but I use it for On road motorcycle.
View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
Radiator hose
Used for MD47
Purchased while replacing Coolant
Softer and easier to insert than OEM
If you remove the Radiator without sidestepping it.
No problem working on the other side.
Glossy Red may not be to your liking.
View detail
Exactly for Light Van Transporter
Foldable and Compact! View detail
Rigid and easy to raise
It is rigid and easy for Arm to step on, making it easy to raise the vehicle. It is also easy to adjust the height to the vehicle by simply rotating the seat.
However, the Lockling-like thing that fixes the seat surface is supposed to be fixed by hand, so it doesn't seem to make much sense. It is quite large and sturdy, but if you want to fix the height of the seat, you may have to tighten the Ring as hard as you can.
View detail
Can also be installed on SUPER CUB110 JA59
Installed on SUPER CUB110 JA59.
The work itself can be easily installed with no problem at all, but it is too long for the SUPER CUB and the body will stand up a little.
View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY, HONDA CRF250L
A little bit of installation. ? Will be
As others have mentioned in the review, the convex part to fit the lower cosmetic bolt×1 and the upper OEM bolt×2 do not fit if they are left as they are.
The lower inner side is fitted by grasping and compressing the inner side with your hand.
I am a little impatient because this area is not in the Instruction Manual.
I am not sure if it is only for the 2023 model, but there is a 5mm pin hole on the inner cowl side, which is flooded with slop water, so I filled it with Pate.
You can see it when you actually fit it, but it is a pin hole that does not bother you that much, so those who do not mind may not mind it.
I wanted the Fender angle to be a little more warped, but since it is a regulatory Limit, other Fender Eliminators may be the same.
View detail
Easy to use
I used to use another company's aluminum screws, but they were so soft that the hex on the head of the screw would come off when tightened.
It is getting worse as it spreads more and more.
This product is hard and tight.
If the head size were a little larger, I would have used four of them, but they were Exactly in the part I use.
Cost performance is good.
View detail
Easily change colors.
It is easy to change the color to match the car body color.
It is a general offfor vehicle shape, so changing the color does not affect the operability of the vehicle.
View detail