Reviews
Burn Prevention
[How is it used?
It is used on a 2022 CRF250RX.
The Exhaust pipe is directly on the side of the body, so if it falls over and gets caught between the legs, it will likely not be hot enough.
I heard that if the Jersey was melted, it would be enough, but if not, the nerves would burn out and there would be no way to recover.
Was the one you received as per Image?
It was more solid than I expected.
Was the installation difficult?
Very easy to install, just adjusting the angle to allow for the slotted screwdriver.
How was your experience with it?
Fortunately, I haven't been pinched yet, but when I touched it to try it out, it wasn't hot at all, so I knew it would work. Relieved.
[Included Parts:were they on?
Body and Band for fixing.
[Was there anything that disappointed you?
None!
If I had to say something, I would say that when the exhaust pipe rubs against the body, there is a very unpleasant sound of the gold material rubbing against each other.......
View detail
Improved footwork
Footing is slightly improved.
Street driving is easier.
The driving feel is unchanged, and the ride quality is almost the same.
It is good because it is not noticeable when put on.
View detail
The first thing to do when you buy an Off car is to
When you are running well, you can't see behind you at all.
Watch out for those creeping Sirens!
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X
It helps that the price is low.
One set was replaced in conjunction with the replacement of Chain.
Cheaper than OEM and lighter weight with no wasted material such as rubber.
It looks Black and the suspension looks tight.
View detail
ใช้งานได้จริง ติดตั้งกับตัวรถแล้วสวยงานครับ View detail
fashion-conscious
Effective for protection of license plate and for press-up.
The included stainless steel bolt is rust-resistant, and the matching color of the Holder is one of a kind.
It also looks good.
View detail
Standard off-road mirror
Off-road driving is not safe unless it is foldable.
The Nut at the base of Mirror is a little loose because of frequent folding.
There are some shaking, but it doesn't bother me much because I don't drive on the road very often.
It is good that there is a reverse thread type. Choose the reverse thread type for the Right Side of Yamaha cars.
View detail
unusual
I just changed the Spring and all the problems caused by the Rear suspension. [Color] Clear. View detail
Requires one step for Waterproof processing
[How is it used? daily use
Was the one you received as per Image? Street Image
Was the installation difficult? The work content is just enough that anyone can do it, and Wiring is also Coupler-installed, so there is no need to play around with it.
How was your experience with it? Exclusive Design so it fits nicely.
[Included Parts:were they on? Included Parts:are all included.
[Was there anything that disappointed you? Waterproof treatment is required. We used rubber boards and foam, but it is quite time consuming.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Even without the Instruction Manual, anyone can simply remove and attach the Screws, so there is no problem.
Reflector does not come with the product, so it must be prepared separately.
View detail
Dress-up
Unlike the md44, the md47 CRF is a little more complicated to install because the Radiator is handled differently from the md44. View detail
Fits: KAWASAKI KX125, YAMAHA IT200, YAMAHA BW200, YAMAHA IT175 77-83, YAMAHA BW350 87-88, KAWASAKI KDX200 83, KAWASAKI KDX175 79-82, YAMAHA YZ125, YAMAHA YZ175 76
Reliable Strength
I read by word of mouth that this Sprocket would fit our TSHUSTLER, so I replaced it. 2Cycle acceleration is good, but bypass and highway driving is very uncomfortable and too much rotation is not good, so I replaced it this time.
Since this is Sprocket, we will not discuss Power.
I was worried because it wasn't a compatible car model, but it fit perfectly, just like the reviews say!
The high hardness molybdenum steel is supposed to be durable, but when the Driver hit it, it immediately got Wound.
View detail
It's shiny and cool.
I was looking for a cool Bolt to hold exterior components in place.
We came across this product.
I don't need Titanium, but they sell only Titaniumium Bolt.
What is going on in this industry? I've been thinking about it.
I have been looking for a cool Bolt for a long time.
First 4Quantity:Set is just right.
I wanted to use 2Quantity because I wanted to unify the exterior Bolt.:I bought a set
Parenthesis is great, and it also reduces the number of tools I have to use. Thank you very much. Thank you forever.
Maybe it will be Button cap in general?
Many of them have high, round heads and are not cool.
This is cool, low head.
I would have preferred one more size up in Hex.
I'm going to lick it. I mean, I licked it a little bit.
But it's cool.
If you are using cheap Hex, beware.
However, I wonder if it suffers from Screw diameter.
Fashion is patience.
Let's all carefully tighten the Screw.
View detail
Fixed
Used for fixing and clamping when replacing the grips.
It is fine, long, and reasonably priced.
View detail
For Off-road and for MOTARD
I bought this for my CRF250M that I use for commuting and city riding.
There were times when I felt a little inconvenienced because there was no Center Stand for maintenance and car washing.
So, when I was looking for a STAND that could be used for MOTARD and Off cars, I bought this one because many people seemed to be using it.
With the CRF250M, I had to tilt the car a little to insert it under the engine, but since the car itself is light, I had no problem at all.
View detail
Rear Carrier and Quantity:You can use it with Set.
I bought this for my CRF250M that I use for commuting and city riding.
I was originally using a Kijima rear carrier, but when I looked for a Kijima side bag support, it was out of print, so I bought a new carrier. This DRCSide bag support can be installed together with the rear carrier without any problem. However, it was quite large and strange to install the screw while aligning the screw holes on the car body, the screw holes on the carrier, and the screw holes on the support, so I recommend that two people work together.
View detail
DRC DRC MOTO LED Phantom tail light
Since the OEM tail lamp is a bit of a boring shape, I installed this SMART LED tail lamp.
It can be easily installed by simply drilling holes and connecting wires, and its shape seems to be highly universal.
View detail
Structure to prevent scratching the car
[How is it used?
Step WGN as a new Transporter (RF3) I bought this product because I needed it for loading and unloading my motorcycle. This product comes in three different lengths, and I chose the middle length. I chose the middle length. If it is not long enough, it will rub the motorcycle the moment I put it in the cargo area, as the slope is too steep to load and unload a large motorcycle with a low belly.
Was the one you received as per Image?
As expected of aluminum, it is light. Since it is foldable, it does not take up much space.
The colors are good and casual.
The orange plastic part at the joint interfered with the ladder and prevented it from being straight.
I thought it might be a problem, so I asked someone who was already using it, and he said that it was designed that way, and that it would eventually wear out and straighten out. I wondered if there was a reason for the shape of the Ladder, because some of the other Ladder models have a slightly raised center.
How was your experience with it?
Loading and unloading the off-road vehicle was no problem at all. However, when loading and unloading the PCX, which has a low underbelly, the Under Cowl got stuck and I had to use the Power Play. I wonder if it would have been better to go up a size...
One of the major reasons why I chose this product was because I thought the material used for the part that hooks onto the car body was rubber, which would not scratch the car body. After using it, I can say for sure that it does not scratch. This is good.
[Points to note]
If you have a wallet and cargo space to spare, I would recommend buying the longest one possible. (I have some regrets)
As mentioned above, some Cases may not be exactly straight at first.
The height of the edge next to the Ladder is not very high, so be careful not to break the wheel.
How did it compare to other products?
I have used a non-Aluminum Ladder, but the Aluminum is clearly lighter.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
If you buy a Transporter, you should also buy a Tie Down Belt.
View detail
Fits: HONDA CBR400R, HONDA CBR650R, HONDA 400X, HONDA CB650R, HONDA CB500X, HONDA CBR500R
easy to stick to
The size of the film was perfect for my car model, and it was very easy to apply as it came with a supplementary seal. View detail
Easy to use and affordable
It's very helpful because you can use it on the screw part of the case cover.
This is especially recommended for CircuitDebut users.
If you're worried about BALI, you can sand it off.
View detail
It is a good item
The installation, brightness, and product accuracy are round. Glad I bought it! View detail