DRC Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

DRC Clear all

DRC

30 Oct 2023

M6 Aluminum Spacer Φ18

Fits: Others

Japanese Webike user

5/5

Functions and looks good as a Washer.

[How is it used?
When I replaced the bolt&washer that holds the exterior of my KDX220SR with a DRC-made bolt&washer, it looked so much better that I decided to use it to hold the exterior of my SEROW250. I checked Webike and found that the product I had purchased before was no longer available.
Did you receive the item as per the Image?
And the products I purchased before. Aluminum Spacer for M6φ18 The product introduction column is in a different frame even though it has the same name as this product. I wondered if something had changed in the design, but the product I received had the same design. (I would appreciate that more.) Prices are slightly lower.
I liked the design of the Aluminum spacer I purchased last time, so the price was a little lower and the quality was similar, just like the Image product.
Was it difficult to install?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How did you like it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the appearance can be changed depending on the design of the BoltHead and the financial strength. (as the price goes up or down depending on the shape and Material of the BoltHead). and can show various faces depending on Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
Was "Included Parts:" attached?
None
Spacer made by DRC previously purchased 20 Quantities:I was disappointed that the Set version was no longer available, but this product offers 20 Quantity:Set was lineup and I was happy to buy it.
Quantity:1 Set of 4pcs. means the unit price per pc. is 211 yen, but Quantity:1 Set of 20pcs. is 181 yen, so if you can use it up, you can use the Quantity:1 Set of 20pcs. is a great value.
Were there any disappointments?
I like the look of the product and I am not disappointed with the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, since there are some people who like or dislike the color of the same Blue.
Other items that would be helpful
Point and hang of installation
This product is like a fashion color that is used in place of a washer when fixing a bolt, so it can be used when installing a cap bolt of the appropriate length to the bolt stop of the part that can be attached. (Aluminum Collar) It is a simple job to chew and use the
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is top level, so I don't think there will be any mistakes in usage.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be large body and large sturdy, but the price of the bolt with good parenthesis design is also expensive, so please consult with your Wallet to get the right bolt. Please consult with your wallet.
[Opinions and requests to Manufacturer
This timeQuantity:1 Set of 20pcs. was available, but I would appreciate it if you could bring it back as some colors are no longer available. View detail

DRC

26 Oct 2023

M6 Aluminum Spacer Ф18

Fits: Others

Japanese Webike user

5/5

Black has been discontinued!

[How is it used?
The bolt that holds the exterior of the car started to rust, and I couldn't shake the feeling of disappointment after having gone to the trouble of making up the car with the Decal Kit.
Was the one you received as per Image?
The outer diameter was larger than expected and could not be used in places with a small depression, but on the other hand, the appearance of the large size could be used to disguise places where the mounting holes are gapped, so I think it was a good purchase for the right place for the right person.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when using Bolt.
How was your experience with it?
Used for other types of vehicles FUJI TUBO type. Compared to the Cap Holder, it is more like a fashionable washer that fits well with modern motorcycles.
However, the shape of the Head of the Bolt to be combined changes the look and feel of the Bolt, which is a bit troubling for middle-aged people with limited finances and Sense (the HeadDesign makes the CoolBolt very pricey...).
As for the product, the coloring of Anodized is vivid, and there is nothing to say, I am only worried about the fading caused by UV rays.
[Included Parts:were they on?
None
20Quantity at the time of purchase:4Quantity because the Set version was no longer available.:Buy the set
When I opened the product introduction page to write a review, I found 4Quantity:I was also troubled by the fact that the Set version was no longer available.
[Was there anything that disappointed you?
I like the way it looks and I buy it. As expected. It was
As there are Anodized products The colors are not what I saw in the pictures." If possible, it may be safer to check the actual product at a motorcycle accessory store before purchasing.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use this product (Aluminum Collar) when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
No special requirements. The outer diameter is Large, so please check if you want to install it on an exterior with a depression.
[ITEMS TO BUY TOGETHER
If the Bolt does not have a large head in M6 size, it is likely to be large body and large sturdy, but Bolts of good parenthesis design are expensive, so please consult with your wallet before you buy them. Please consult with your wallet.
[Opinions and requests to Manufacturer
Although this product is no longer available, it would be very much appreciated if another product with the same shape and color is continuously sold, so please continue to sell that product as much as possible. View detail

DRC

25 Oct 2023

Dura Rear Sprocket

Fits: HONDA CR125R, HONDA CR250R, HONDA CRF150F, HONDA CRF230F, HONDA CRF250F, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250X, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450X, HONDA CRM250AR, HONDA SL230, HONDA XR230, HONDA XR400R, HONDA XR650R, HONDA XR250R, HONDA XR250MOTARD, HONDA XR250BAJA

NO NAME

5/5

Inexpensive and good quality

Wanted a good quality black sprocket, but didn’t want to spend $100 This is the first dura sprocket I've used and for the price the quality seems impeccable!This sprocket looks to be well made, fit good, finish good, wear good,. The fit is spot on and Id say even if it doesn't last as long as other more expensive brands (nothing leads me to believe it wont) its worth the cost. It looks great on the bike and seems very well made. Time will tell.i like the look, but still DRC is making good stuff at affordable prices and don't get me started on the prices these days.fast shipping,great packing.thank you Webike. View detail

MOTOLED Teardrop Lens Replacement Type #586

DRC

15 Oct 2023

Dura Rear Sprocket

Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CR125R, HONDA CR250R, HONDA CRF150F, HONDA CRF230F, HONDA CRF250F, HONDA CRF250X, HONDA CRF450L, HONDA CRF450X, HONDA CRM250AR, HONDA SL230, HONDA XR230, HONDA XR250, HONDA XR250BAJA, HONDA XR250MOTARD, HONDA XR250R, HONDA XR400R

Japanese Webike user

5/5

Steel Durability and Meatless Sprocket

Since I also made MOTARDWheel to use off-road and street separately, I decided to buy reliable SUNSTAR for the front sprocket and DRC's Sprocket, which was good to use, for the rear sprocket, and looked it up on Webig.
Since the delivery date for the 39T was undecided, I thought there must be a DRCSteel sprocket that I had purchased in the early days of the new car after I placed a BackOrder, so I tracked it down and installed it anyway.

But it arrived ahead of schedule.

I felt that it was better to buy Spare when it was available, as times are not kind to older models these days, so I immediately placed an order for it.

Often, when I thought that I would buy it again sometime soon, it was discontinued. I have made several mistakes because of this.

The feel is the same as we have known before.
To install the sprocket, insert the Hexagonal Wrench into the Bolt side and hold it down while turning the nut on the reverse side to secure and loosen the bolt without damaging the bolt. View detail

Replacement Pin for Stainless Steel Brake Pin

DRC

09 Oct 2023

Dura Rear Sprocket

Fits: HONDA CRF250M, HONDA CRM250R, HONDA XR250R, HONDA CRF250RALLY, HONDA CRF250L, HONDA XR650L, HONDA XR600R

Japanese Webike user

1/5

not conforming

I purchased this bolt to install on my MotorcycleXR250R (me08) 1998, but the bolt seat is not taper and the bolt hole diameter is for M10. I have been waiting for the return and exchange, but I have not heard anything from them. I have not been able to contact the company to inquire about the return. I tried to enter my vehicle information when I purchased the product, but I could not enter the year of my XR250R. I thought it was an ALL MODEL model, so I purchased it. View detail

DRC

03 Oct 2023

Dura Rear Sprocket

Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ400-450F, YAMAHA YZ400, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR450F

Japanese Webike user

5/5

Much lighter than NORMAL.

DriveSprocket of NORMALWR250R was changed from 13T to 14T and Driven from 43T to 48T.
The secondary reduction ratio is slightly lower geared, from 3.308 to 3.429.
I decided to use Dura for both front and rear because of its durability, but it is lighter than I expected due to its meatless design.

With Driven48T, I think it is better to loosen the Chain Guard when assembling to avoid interference during work.

The effect of the low gearing is that it is easier to maneuver at low speeds. It is only a slight change, but the effect is felt well.
The degree of HappyMeter, however, is very much the same (laughs). View detail