Reviews
DRC's Sprocket
I bought the DRC Sprocket so I bought it, but the Bolt is flat while the Sprocket is flat Taper, the holes are governor, Garbage, I used the OEM one as it is View detail
No problem so far
WR 250X I exchange Bolt at the same time as Sprocket exchange of 2007 year.
I am driving without trouble for now without looseness.
View detail
It is consumable parts.
Rear sprocket We exchanged at the same time when exchanging.
If this price is exchanged everything will not be regrettable.
Rigid feeling ? Fit feeling is also good.
All Quantity : Set so it's safe.
View detail
enough
OEM is too expensive when exchanging, so use this.
There is also a reputation for easy licking, but I think that work is probably only bad.
It's enough.
I have never Trouble so far.
I will keep using it for the future.
View detail
Renthal used for 48 Sprocket installation!
NORMAL's Bolt is 10 mm and Renthal 48 Duo Sprocket can not be installed, but this Bolt solves! Off car is a salvation Bolt who is supposed to think Renthal's big sprocket is cool! W View detail
With Sprocket exchange
Rear sprocket I bought it along with the exchange.
Since Bolt & Nut attached to purchased Sprocket was able to be used, this is unused but I think that it is a good good item for Cost performance.
You can also use it with other models.
View detail
It is Fu Two.
Honda's OEM Parts Number Because ordering is troublesome, I replaced it with kore.
Material is so soft as Aluminum casting.
I had to scare it when it was not working carefully.
It works well if attached, but is not suitable for frequent removal.
View detail
Cheaper than OEM Parts Number
【What made you decide the purchase?】 I used it even before cheaper than OEM Product. Bolt, Nut, Washer is doing Set and Nut is Self Locking Nut and there is no need to use Screw lock agent.
【How was it actually used?】 You can install anything without problems. Besides this time's Wheel, using it for about 2 years with durability and corrosion resistance has not caused any problems at all. I do not know yet more durability.
【Was it difficult to install? (Hard parts case)】 Easy 6 mm Hexa and 12 mm should preferably have StraightGlasses or longer Combination
【Please tell me the point of installation and hang (in the case of Hard parts)】 Tightening Torque is firmly. Spoke gets in the way and all the Nuts can not be locked in Torque wrench, but I remember the tightening and leaving the other Nuts with the same Torque. I think there is a problem with tightening Torque shortage, but I think that a little overtorque is problematic.
[Is there anything I was disappointed about?] It was an unchanging product as I have purchased it before.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I wonder if the finish is beautiful a little more Plating
【Have you compared items?】 OEM Product, BOLT Shoulder Bag, ZETA
[Others] Finishing is a price, but it is a firm product. Since it is Self Locking Nut, it is exchanged for new items each time Sprocket is exchanged.
View detail
It is cheaper than OEM and satisfactory product
I purchased it simultaneously with RSprocket of DRC.
Nut was properly Lock nut, it was a cheap and satisfying item than OEM.
I do not know the durability yet, but I think that it can be used without problems.
View detail
The texture is not that good
Purchased for DRC Sprocket installation.
It's inexpensive and it will become soiled by anything, so it does not matter if you care about its appearance.
I do not understand Material well well, but be careful not to make it rust.
View detail
Sprocket exchange
Since it is necessary for Sprocket exchange of DRC, I bought it with Sprocket at the same time.
The required number is 4, but since this product is Pack of 06 Rin Quantity : 2 pc over. I think that it was still better if 4 lines were lineuped.
View detail
DRC Sprocket Bolt/Nut
I purchased at the same time as it is necessary for Dura Sprocket installation.
I think that it is necessary and sufficient strength and construction, but whether the accuracy is low or the movement that the hexagonal hole is slightly transformed - - -
View detail
easy to handle
Originally, I bought it by mistake, but ...
Sprocket boltNut of CRF 250L is M10, so it is natural, but as the diameter is different, a gap is formed and the Sprocket moves.
Spacer which fills this gap at another site was sold, so I use it in combination with it.
So ... Sprocket boltNutM.
The serviceability is Up even if I say anything. By the way, I believe it is lighter than OEMBolt nut, so Petit is weight saving
View detail
Great
I only forgot it because I forgot to take a picture
This Bolt / I think Nut is wonderful.
It is recommended!
Nut must be locking prevention.
Bolt's Length is the best.
It is not too long, not too short, it's an ideal length!
Perhaps it was perfect as it was combined with DRC's Sprocket,
Although a certain Manufacturer's Sprocket comes with a dedicated Bolt
Bolt is long. I was slightly disappointed..
When exchanging other Machine Sprocket, this Bolt / I will change to Nut.
Based on my experiences, this one definitely has good serviceability w
View detail
Price difference with OEMBolt is obvious
OEMBolt is 1 pc / Considering about 200 yen, the price difference is clear. I changed it cheaper if I was in Sale. I think that it is best if there is also 10 mm diameter Bolt if possible.
ME06's hub is 10mmBolt so I used OEMBolt this time ...
View detail
Quantity : This price with 1 Set of 3-items !!
【What made you decide the purchase?】 Bolt - NutWasher is attached to each 6 each and this price is attractive
【How was it actually used?】 I purchased it because it is necessary for installing Sprocket of DRC but it is not possible and it is impossible
【Was it difficult to install? (Hard parts case)】 Any item
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
[Is there anything I was disappointed about?] Since the price is expensive, it can not be helped but it looks cheap
【Hope for Manufacturer - Please let me know if there are any improvement points】 DRC's are inexpensive and many good ones so I want you to continue making good ones
【Have you compared items?】 nothing special
[Others] Any item
View detail
Attached to HUSQVARNATE 510
HUSQVARNA(SMSpec. ) Purchased to attach Sprocket.
Because the price is also cheap and has become a reliable Brand
That's alright..
HUSQVARNA sometimes screws here loosen easily and sometimes come off (once disaster catastrophic... ) So let's check firmly!
View detail
For anything Cost performance
Bolt, Washer, Nut set This price is cheap. I like places that are in a simple package and not over packed. I can trust in DRC. There was no problem running with 2 ST 250. I purchased two before because I purchased it very well, so this time. It is good even if it is reserved.
View detail
Since Driven sprockets were exchanged, exchange of was done in a meaning called consumable goods. About the quality of goods, I think that it is as a price. I feel that it is safer to use exchange to brand-name parts.
Since Driven sprockets were exchanged,
exchange of was done in a meaning called consumable goods.
About the quality of
goods, I think that it is as a price.
I feel that it is safer to use exchange to
brand-name parts.
View detail
He bought it together with the Sprocket of DRC. In order to both run with town riding and a Course by one set, Sprockets are exchanged fairly frequently. Since it is the parts which throw away, the thing of DRC nature cheaper than brand-name parts is us
He bought it together with the Sprocket of DRC.
In order to both run with town riding and a Course by one set, Sprockets are exchanged fairly frequently.
Since it is the parts which throw away, the thing of DRC nature cheaper than brand-name parts is used.
It is the better, if durable to a slight degree since it is a portion which requires the
Torque.
View detail