Reviews
Fits: KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KL250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX250, KAWASAKI KX500, YAMAHA WR250Z, YAMAHA YZ250, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KDX200, KAWASAKI SUPER SHERPA, KAWASAKI KLX250R (for competition)
DRCFront sprocket
It was just the right size. This is also adjusted by Rear sprocket. View detail
Fits: KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI Z250 (2013-), KAWASAKI Z250SL, SUZUKI 250SB, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI D-TRACKER-X
DRCFront sprocket
It was just the right size. Now I will adjust it with Rear sprocket. View detail
DRC wheel tool anti-vibration/balancer option 10mm shaft set Product # F4287
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
Fits: KAWASAKI KX100, KAWASAKI KX60, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, YAMAHA PW80, YAMAHA TT-R110E, YAMAHA TT-R50E, YAMAHA TT-R90, YAMAHA DT50, YAMAHA YZ60 81-84
Used for KX112
Used for KX112. The finish and accuracy are sufficient for my needs, and now I can use it on the Enduro. View detail
Fits: YAMAHA WR250X, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R
Driven Sprocket Replacement
Replaced OEM 13T with 14T.
Traveling roads and city driving has become much easier!
Buy a spare Lock washer.
View detail
Fits: YAMAHA SEROW250, YAMAHA TRICKER, YAMAHA SEROW225WE, YAMAHA SEROW225WE, YAMAHA SEROW225W, YAMAHA XT250
Conscientious price and good quality
Compared to other manufacturers, the price is reasonable and the quality of the product is balanced. View detail
Purchased for 23CRF250L
Purchased for CRF250L.
The minimum ground clearance is low because it is a non-S model, and also because it uses ACERBIS skid plates.
It does not fit under the Engine as it is.
I have to pull the vehicle up to get the STAND in, and when I lower it down, the STAND is stuck.
I would appreciate it if you could lower it a bit more.
I use STAND after putting the front and rear Tire on the Block because it is inconvenient.
If not for this, it would be a perfect score, but I originally had the same impresion for use on a CRF250L
I purchased at my own risk and have no problems.
View detail
Challenge to recombine Rim
[How is it used?
The front wheel of the GasGas EC250 2023, which I always use for forest road touring, has become distorted and swung large, so I replaced it with a new rim. I used this Gyro Stand to build the Spoke.
How was your experience with it?
I worked with DirtFreak's You Tube as a reference while taking a swing.
It took us about two hours and we were able to correct the flare there.
The ride felt completely comfortable and I was able to replace the Rim without any problems.
The Off-road Wheels are easily distorted when used,
I felt it was important to correct Wheel distortions from time to time.
I am glad I bought the Gyro Stand and tried it myself.
View detail
Fits: GASGAS 125-515cc (EC/FSR MC SM), HUSQVARNA SMR125-610, HUSQVARNA SM125-610, HUSQVARNA TXC125-610, HUSQVARNA TE125-610, HUSQVARNA TC125-610, HUSQVARNA CR125-610, SUZUKI DRZ400SM #2, HUSQVARNA WR125-610, SUZUKI DRZ400S, SUZUKI DR250S, SUZUKI DR250S DJEBEL250
I need it enough
The rear sprocket on my DRZ400sm K9, which I bought from a private seller, was a 44T X.A.M. The front one was a stock 15T, but while riding to work, it was hard to handle at low speed and low rpm, and the chain was not moving well. I didn't know how the stock rear sprocket felt like, so I decided to change it to DRZ400sm's stock rear sprocket.
Material in terms of weight:It is heavier than Aluminum's XAM.
The build quality and precision are perfect, and I don't know how the weight affects the driving experience, but I don't feel any loss of lightness compared to the XAM.
Considering the price of Aluminum Sprocket from other manufacturers including XAM, this is enough for me.
The Chain was also replaced at the same time, which greatly improved the smoothness when turning the Wheel by hand.
The durability and other issues will come later, but for me, the biggest concern is the drive shaft that has not been replaced with a countermeasure, so there is nothing to worry about with the Sprocket.
If you are considering purchasing Material:I think it is how to digest the fact that it is heavier than Aluminum.
Frankly, I don't think you need to worry about it unless you are a Level person who can grasp the impact of the difference in weight by feel.
Front was built with the OEM 15T, but it has become quite Mild and easy to ride, so I am thinking of buying a 15T instead of the 14T made in sunstar that I bought at the same time.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
just right
The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Unchanged appearance from OEM and improved operability
It is used for crf250rally50 and md44.
The appearance is the same as the OEM appearance, but Short
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
OEM look and feel for improved operability
Used in crf250rally50 and md44 。
Short lever is Direct in operation and responds to detailed Action.
The same appearance as OEM is also good
View detail
OEM look and feel for improved operability
It is used for crf250rally50 and md44.
It has the same appearance as the OEM, with Direct operability and responds to detailed Actions.
View detail
Great idea!
Spoke replacement and adjustment of CUB90 and CRF250RALLY.
We used to use a dedicated STAND that had several types of stick-type shafts, but they had disappeared before we knew it. I would have liked to have had a dedicated STAND if possible, but due to budget constraints, I prepared a wooden box this time. At the same time, I also purchased a leveler from a 100-yen store. Actually, this is the first time for me to use a taper type shaft.:Pair (for Left and Right) The wheel bearing is clamped with the Spacer from the Spacer and secured with the Screw. It is very easy to use and easy to fix. The taper type does not require multiple shafts to be stored, and as long as the wheel bearing is not loose and properly seated on the rim, the taper type will center the shaft properly. I don't know how long the taper type has existed, but whoever thought of it is amazing.
At first I thought of substituting a Pipe of the same diameter as the Shaft. When I actually used this product in my work, I realized that it is one of the most convenient and necessary tools.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X
Dramatic change in characteristics
Replaced the standard 13 chimes with 12 chimes.
YZ125X (2nd car) The new engine is equipped with a 2-stroke engine, which has low-speed, high-torque driving characteristics that improve hill climbing performance and make it easier to maintain high rpm in the low-speed range and take advantage of the characteristics of the 2-stroke engine.
We introduced this to compensate for the lack of skill in the car Both Sides. Although the maximum speed is reduced at each GEAR, it is now possible to drive at one GEAR higher than before while maintaining stable Engine RPM.
Unfortunately, the Rider's skill was so poor that he could not turn the Engine enough, causing the CUB to be made, or he could not use the high speed GEAR and pulled the low GEAR to turn the Engine oddly, which also affected fuel consumption, but this has improved somewhat.
I felt the benefit especially in low speed corner.
Impact is required for removal, and Torque cannot be easily applied during installation. (GEAR turns). Therefore, it may be a good idea to do some preliminary study on the Internet or ask an experienced person to consult with you before you start.
View detail
Fits: YAMAHA XT250X, YAMAHA SEROW250, YAMAHA XG250 TRICKER
This offsets those who are putting in TR-011Tourist.
I went from 15 to 14 on NORMAL, doesn't seem like much of a change? I thought so,
The reason for this was that we changed the tires to TR-011Tourist at the same time, so the larger outer diameter of the tires offset the higher geared tires.
If I had only changed the Sprocket without changing the Tire, I might have thought, oh?
This is not exactly a product impression, but when tightening the lock washer, it is convenient to use water pump pliers for easy and clean tightening.
View detail
new setup,great look,cheap fuse
Great sprocket bolt kit! The finish is slightly mat than OEM which looks awesome when paired with a new aftermarket sprocket.Great set of fasteners for replacing the stock ones. They are a little longer and the allen head used is a few sizes larger (doesn't round as easily) than the stock ones did however have to tighten them again after my first ride. After that they have stayed tight. I'm glad i bought these as they work great. Much easier to tighten without being worried about stripping the things.webike too fast,Because it is packaged very well, it is subjected to extra inspection at customs.But the shipping fee is high. View detail
Fits: KAWASAKI KLX450R, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX450F, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI RM125, SUZUKI RM250, SUZUKI RM80, SUZUKI RM85, SUZUKI RM-Z250, SUZUKI RM-Z250, SUZUKI RM-Z250, SUZUKI RM-Z450, YAMAHA WR450F, YAMAHA WR450F
Good
Everything was fine, the shipping was fast, the price doesn't include the tax but you can see this information on the website, and they give all documents for easyer and fast administration for the customs. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X
To Shorten
I bought this to shorten it to make it easier to front up on my Yz125x. The texture is solid and the quality seems to be good. The price is reasonable and I think it is a good cosmetic product. View detail
Great product Great price!
Great quality looks and feels just as good as some of the top brand sprockets on the market. Have tried a few different brands but ended up ordering this one the last couple times I need a front sprocket. Just hit 60 hours on the last one I purchased and it doesn't seem to be starting to "shark fin" at all or get overly worn out yet. Happy with the results again and again.don't forget the prevailing torque nut while you are in there changing things out. my front sprocket never wears really...Pricing is the best I've seen and fitment was perfect!Will definitely be buying more in the future! View detail