Reviews
Exactly for Light Van Transporter
Foldable and Compact! View detail
Excellent loadability, may be essential for transporting on road motorcycles.
[How is it used?
It is installed in the second row of the E25Caravan.
Since I am usually an Off-road motorcycleMain, I had difficulty transporter an On road vehicle.
It was difficult to pull from below, so we introduced this one.
I could have drilled holes in the Floor, but it was too much of a hassle, so I bought this one after seeing someone I know using it.
Was the one you received as per Image?
This product, which did not seem to be available, is a great way to scratch an itch.
I was worried about getting to Caravan, but it was no problem.
Was the installation difficult?
ScrewQuantity:It's 2pcs, so it's really easy.
How was your experience with it?
Good as expected.
It is small in size and does not get in the way at all.
I don't usually use the Hook much, but I don't mind when I don't.
As a byproduct, a board is strapped to the back of the second seat, which also plays a role in securing it.
[Included Parts:were they on?
Only the one in the product image.
[Was there anything that disappointed you?
Not at all!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I know it's not very demanding, but Quantity:I would have been happy if you could have made it cheaper, even if it was 1 set of 2pcs. or something.
View detail
To be mounted in the car.
It is useful for in-vehicle use.
Large size is reasonable, foldable, not that heavy, and not too expensive. 1pc. is convenient to have.
View detail
It is both light and strong.
I bought a new Transporter, so I bought a Ladder rail to go with it. (Lamp) I was looking for a product and found this product and purchased it.
The deciding factor is the length when folded.
The 150 cm short length is not collapsible and remains long.
However, with this 180cmMODEL, the length can be reduced by about half by folding it.
The small size of the Transporter was EXACTLY what I needed to save a little space.
The hybrid structure of resin and gold seems to be the right material for the right job. I was impressed by the balance between lightness and durability. In my case, the load capacity is sufficient because my motorcycle is only a light off-road vehicle or CUB.
The quality and price are in line with each other, and the cost performance is as good as you would expect from a DirtFreak product.
View detail
It is light and easy to use, but...
It is light and easy to handle. However, when used near its load-bearing capacity, the black plastic part and the aluminum frame began to bend. Although it has not broken yet, it is recommended to use it with a margin for weight. View detail
-- DRC:hybrid lamp straight type product number: -- D36-41-115 merchandise-information goods details size: -- 20 cm x 150-cm withstand load restrictions: -- it is the lightweight loading ramp borne by the way of thinking new 210 kg. With the combinati
-- DRC:hybrid lamp straight type product number: -- D36-41-115 merchandise-information goods details size: -- 20 cm x 150-cm withstand load restrictions: -- it is the lightweight loading ramp borne by the way of thinking new 210 kg.
With the combination of the resin panel developed by new technique, and an aluminum extruded material, it succeeded in the weight saving from the conventional loading ramp made from aluminum.
The withstand load engine performance of a resin panel is enough, and it can bear the weight of an off-road motorcycle calmly.
With the form of the design only for a motorcycle, it is proud of preeminent sense of stability.
The rubber is stuck on the flesh side of the plate hung on a transporter, and a transporter is not damaged.
The best size can be chosen as its transporter by abundant size deployment.
View detail
Just the right length for MINI, etc.
Just the right length to load in a light van without folding it up
Ideal for Mini bike
Might the gradient be steeper and harder to pack in a 250ccClass?
View detail
Structure to prevent scratching the car
[How is it used?
Step WGN as a new Transporter (RF3) I bought this product because I needed it for loading and unloading my motorcycle. This product comes in three different lengths, and I chose the middle length. I chose the middle length. If it is not long enough, it will rub the motorcycle the moment I put it in the cargo area, as the slope is too steep to load and unload a large motorcycle with a low belly.
Was the one you received as per Image?
As expected of aluminum, it is light. Since it is foldable, it does not take up much space.
The colors are good and casual.
The orange plastic part at the joint interfered with the ladder and prevented it from being straight.
I thought it might be a problem, so I asked someone who was already using it, and he said that it was designed that way, and that it would eventually wear out and straighten out. I wondered if there was a reason for the shape of the Ladder, because some of the other Ladder models have a slightly raised center.
How was your experience with it?
Loading and unloading the off-road vehicle was no problem at all. However, when loading and unloading the PCX, which has a low underbelly, the Under Cowl got stuck and I had to use the Power Play. I wonder if it would have been better to go up a size...
One of the major reasons why I chose this product was because I thought the material used for the part that hooks onto the car body was rubber, which would not scratch the car body. After using it, I can say for sure that it does not scratch. This is good.
[Points to note]
If you have a wallet and cargo space to spare, I would recommend buying the longest one possible. (I have some regrets)
As mentioned above, some Cases may not be exactly straight at first.
The height of the edge next to the Ladder is not very high, so be careful not to break the wheel.
How did it compare to other products?
I have used a non-Aluminum Ladder, but the Aluminum is clearly lighter.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
If you buy a Transporter, you should also buy a Tie Down Belt.
View detail
If you use the Seat with it folded, tragedy awaits you.
As you can see, it is a product that can be attached to the legs of the second seat to add Tie DownHook.
It is important to note that the second seat is designed to be used with the seat out (ready to be used as a seat) and not folded.
It looks like you can use it folded up, but you can't because the seat itself floats when you try to pull it down with Tie Down.
I thought I could use it for a moment because the Seat that I was using in the folded state would not lift up easily, but if I continued driving, the Seat would lift up and the body of the car would fall down at the same time.
Of course, if you use it with Seat out, there is no problem.
However... I almost never use the RearSeat, so I always fold it up to increase the cargo capacity.
So, ignore the original usage and don't do it if it's true. Seat folded. I'm forced to use it in
The way I did it was to clamp the pipe in a position that was 90-degrees different from the correct position.
In this method, the pipe clamp is subjected to a great deal of force in the direction of rotation, and in the worst case, the clamp may cause the hook to rotate and the Tie Down to loosen.
It is completely misused and all at your own risk.
Seat. "Hard to float." In the worst case, there is a very high possibility that the motorcycle will float and fall over.
However, if you use the Belt MountHook High ace for 200 series (https://www.webike.net/sd/24635762/) to hang the bike from the top first, and then pull it downward, you can prevent the bike from falling over even in the worst case scenario.
I don't want my motorcycle to fall over or have an accident, so I use them together properly.
In addition, the clamp part of the product is quite a gorgeous material.:It's aluminum, and the surface is moist and polished as if it were Barrel polished, and it looks pretty good.
However, for some reason, the hooks are unusually tacky, and commercially available steel hooks are still used.
I don't think anything of it, because I'm in the camp where quality is good, but if you're looking for a luxurious interior, it might bother you.
View detail
Compact
[How is it used?
I use it to put my Off car on High ace.
I used to use Straight's DRC Lamp, but it was too long and I had trouble storing it, so I replaced it with this foldable one.
Was the one you received as per Image?
As per Image
It feels a little heavier than I was expecting.
How was your experience with it?
It can be folded so that it can be loaded vertically, and of course it fits under the belly of the Motorcycle as shown in the photo, so you can use the space effectively.
It's great because I load three cars or a stupid load.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Rubber of the foot is a Replace product, so buy it when it is gone.
Hybrid Lamp Replacement Foot Rubber (https://www.webike.net/sd/23176446/)
View detail
Can be mounted at any location
I bought this for the purpose of applying Transporter's Tie DownHook.
Since it can be mounted anywhere in the Piping section, you can find a good spot to make a Spot by yourself.
I couldn't tighten the bolt very tightly because of Hexa, so I applied Screw lock agent to it.
View detail
Recommended
It is lightweight and has some strength.
The part that hangs over the body of the car is rubberized to prevent scratching. It is easy to use and recommended.
View detail
Repair Parts was there to help.
[How is it used?
Hybrid lamp made by DRC, which I think many people who transport Off cars with Transporter use, because it is light and very easy to useMaterial:I don't use AluminumLadder much anymore.
When I use it to some extent, the tip of Rubber is gone before I know it, and I used it as it is, but I noticed that there are Repair Parts and bought it.
Was the one you received as per Image?
The item in the product picture arrived. There was no particular problem in the condition.
How was your experience with it?
It's easy to install as it just goes on. The rattling became proper and returned to the original feeling.
[Points to note]
This part is still easy to take off, and there are people around Off car riders are also missing a lot.
Not only insert the Rubber, but also wrap the inside with Vinyl Tape etc. to fit the Rubber without any gaps, or use the adhesive for Rubber.
How did it compare to other products?
There is no particular product to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I use it for Transporter.
I always ride a HUSQVARNA TE250 for off-road fun, and I use a Transporter to carry it to the off-road course. This time I changed from Caravan E25 to High ace wide body middle roof. By the way, it is a Gasoline car and the fuel consumption is a little low, but I am very satisfied because I changed it cheaply.
I was having trouble finding a HookPoint to put the Tie Down on when loading the motorcycle, so I bought this product to make a HookPoint on the second seat. It was very convenient and easy to use.
Installation is very easy with just a few tools. It took me about 10 minutes to install. I finished it quickly instead of Sunday Large work.
I think it can be used not only for High ace but also for Nissan's Caravan, etc. If you are having trouble with HookPoint, this is a great recommendation.
I think I'll paint it next time so the color doesn't show up.
I hope you all give it a try!
View detail
Lightweight Ladder for Off-road motorcycles
Light weight compared to other all-Gold Ladders.
I live in an Apartment and usually keep it in my room, so it's easy to get it out because it's so light.
Lamp part is Material:I am concerned about the long term durability because of the Plastic, but I have used it for about a year and have not had any problems.
The width is a little narrow, so you have to be a little careful when loading it.
I think it is a good product for light weight off-road motorcycle.
However, if you can leave the Ladder in your car and store it right next to a parking lot, you can
Shouldn't it be made of all Gold genus? I think so.
View detail
For the ideal Tie Down angle.
I use a 200 series High ace for the Transporter.
When you hang Tie Down on the Front, here! There's no place for that, is there?
I recommend this product because you can make your own place to hang it in the ideal place.
The quality is not very good lol.
View detail
Very good and easy to carry.
I thought it was very light and easy to carry.
The ease of use and strength of the product is perfect.
It's made by DRC, so you can feel safe.
View detail
It's nice to be light.
It is not load-bearing because it is for Off-roadMachine, but the material:I like that it's Plastic, so it's very light.
I also like the fact that it looks a little more stylish than steel.
As expected of a DRC product.
View detail
Lightness is justice
Light and Compact!
It's a Transporter in a light 1box, but it's still in the Trunk Type of Motorcycle (Super CUB to Off-roadSpec.) The load-bearing capacity is no problem "Shita" I don't care about such things as
View detail
A light off car is enough
Purchased a DT200WR to load on HIJET cargo Loaded and unloaded about 3 times after purchase
There is no particular problem of distortion It is lighter than the usual AluminumLadder and looks better
The Ladder was fixed to the body of the vehicle with the Belt to make sure it was loaded, but the tongue part was too long
It seems to work fine just to put it on
It may be unavoidable due to its structure, but it does not become a straight line at the time of maximum extension
delicately "" I'm worried about the fact that the joint is not combined with Exactly
It's also not ideal for carrying heavy motorcycles due to its narrow width
If you only carry a light Off car, then Recommendation
View detail