Reviews
Exactly for Light Van Transporter
Foldable and Compact! View detail
To be mounted in the car.
It is useful for in-vehicle use.
Large size is reasonable, foldable, not that heavy, and not too expensive. 1pc. is convenient to have.
View detail
It is both light and strong.
I bought a new Transporter, so I bought a Ladder rail to go with it. (Lamp) I was looking for a product and found this product and purchased it.
The deciding factor is the length when folded.
The 150 cm short length is not collapsible and remains long.
However, with this 180cmMODEL, the length can be reduced by about half by folding it.
The small size of the Transporter was EXACTLY what I needed to save a little space.
The hybrid structure of resin and gold seems to be the right material for the right job. I was impressed by the balance between lightness and durability. In my case, the load capacity is sufficient because my motorcycle is only a light off-road vehicle or CUB.
The quality and price are in line with each other, and the cost performance is as good as you would expect from a DirtFreak product.
View detail
Structure to prevent scratching the car
[How is it used?
Step WGN as a new Transporter (RF3) I bought this product because I needed it for loading and unloading my motorcycle. This product comes in three different lengths, and I chose the middle length. I chose the middle length. If it is not long enough, it will rub the motorcycle the moment I put it in the cargo area, as the slope is too steep to load and unload a large motorcycle with a low belly.
Was the one you received as per Image?
As expected of aluminum, it is light. Since it is foldable, it does not take up much space.
The colors are good and casual.
The orange plastic part at the joint interfered with the ladder and prevented it from being straight.
I thought it might be a problem, so I asked someone who was already using it, and he said that it was designed that way, and that it would eventually wear out and straighten out. I wondered if there was a reason for the shape of the Ladder, because some of the other Ladder models have a slightly raised center.
How was your experience with it?
Loading and unloading the off-road vehicle was no problem at all. However, when loading and unloading the PCX, which has a low underbelly, the Under Cowl got stuck and I had to use the Power Play. I wonder if it would have been better to go up a size...
One of the major reasons why I chose this product was because I thought the material used for the part that hooks onto the car body was rubber, which would not scratch the car body. After using it, I can say for sure that it does not scratch. This is good.
[Points to note]
If you have a wallet and cargo space to spare, I would recommend buying the longest one possible. (I have some regrets)
As mentioned above, some Cases may not be exactly straight at first.
The height of the edge next to the Ladder is not very high, so be careful not to break the wheel.
How did it compare to other products?
I have used a non-Aluminum Ladder, but the Aluminum is clearly lighter.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
If you buy a Transporter, you should also buy a Tie Down Belt.
View detail
Can be mounted at any location
I bought this for the purpose of applying Transporter's Tie DownHook.
Since it can be mounted anywhere in the Piping section, you can find a good spot to make a Spot by yourself.
I couldn't tighten the bolt very tightly because of Hexa, so I applied Screw lock agent to it.
View detail
Lightweight Ladder for Off-road motorcycles
Light weight compared to other all-Gold Ladders.
I live in an Apartment and usually keep it in my room, so it's easy to get it out because it's so light.
Lamp part is Material:I am concerned about the long term durability because of the Plastic, but I have used it for about a year and have not had any problems.
The width is a little narrow, so you have to be a little careful when loading it.
I think it is a good product for light weight off-road motorcycle.
However, if you can leave the Ladder in your car and store it right next to a parking lot, you can
Shouldn't it be made of all Gold genus? I think so.
View detail
For the ideal Tie Down angle.
I use a 200 series High ace for the Transporter.
When you hang Tie Down on the Front, here! There's no place for that, is there?
I recommend this product because you can make your own place to hang it in the ideal place.
The quality is not very good lol.
View detail
Lightness is justice
Light and Compact!
It's a Transporter in a light 1box, but it's still in the Trunk Type of Motorcycle (Super CUB to Off-roadSpec.) The load-bearing capacity is no problem "Shita" I don't care about such things as
View detail
Very useful for transporterization!
Tie DownHook on a High ace or other motorcycle when loading the motorcycle If you don't have enough space and can't pull at the right angle, the Motorcycle will be unstable to secure It's done and dangerous
This product is available in Eyebolt (with M8 Spring washer) and Aluminum Quantity of pipe clamp:Set, and the Transporter's Second seat Base is set to It can be installed with Bolt On This is more convenient to install SMART than making your own
Buy three and attach them to the Center and both Sides to load two motorcycles You can
By the way, using wheel chocks (WheelClamp) together is very stable for loading Base of Aluminum is cast, and although it does not seem to be very hard, it is a good choice for strength It is enough for
In addition to this, it seems that Universalism is high with a lot of ingenuity
View detail
This lightweight car can be used well with this
I am using my car Ducati or commuter Motorcycle when carrying it on the car. Usage frequency is low.
It will be enough if this is a light car with a weight of 150 kg. But there are some points to note so I'll write it later.
I cared Ducati MONSTER many times with this Ladder (VOXY) Posted on. It goes without saying that it is easier to use Ladder that is longer and wider and has a ladder section denser. To the last lightweight for Vehicle, in case of emergency Ducati MONSTER if it is about somehow.
As a precaution, because the total length is short, depending on the combination of car and Motorcycle, the bottom of Motorcycle will rub.
Because I was Limit safe in my case, please check firmly in a minute way.
View detail
The width is narrow.
We are loading WR250X in Step WGN but thanks to its narrow width we use quite carefully. If I get used to it I will be durable but I am afraid.
Compactness when folding is Number one.
View detail
I think that it is the first purchase, but it is good
Vanette used to load 250 in a van.
Purchase a longer one thinking that loading is easier for the longer one
It is not reliable that the load capacity is 170 kilos, but there were no problems with loading and unloading several times..
Nail? There is no problem on either the car side or the ground side
The width is a little narrow and A little uneasy, but SIDE has some protrusions on the upright board so I rely on it to get off..
Due to the load-bearing Limit, the resin of the transverse board pretty much deflects.
weight - Bulky also has no problem in carrying.
Since it is safe to have a little bit width, it is -1 with 4 stars
Quantity : 5pcs. But it was a good idea.
View detail
Let's attach SurfBoard rack to GSR 250 in BALI
【Deciding factor of purchase】
○ INAZUMA250 (GSR250) Where I was looking for items as preparation for attaching SurfBoard rack to "DRC Pipe clamp hook" I tried buying it so that I can divert it.
○ I was considering my own making, but 1pc. I think that it is cheaper than making 1,451 yen.
【Description of item】
○ High ace - Caravan and other Transporter's folding type Rear seating seat Pipe was used to mount ←, but I wanted to specify clearly how much diameter Pipe can be fitted. I think that the bar of High ace was about 25 φ in outer diameter.
○ I think that you can Clim and Chitin up to the outer diameter 22φ ~ 30φ.
○ ClampHook for applying and Tie Down. ← This is M8 Eyebolt is installed.
○ If it is M8, you can remove the attached Eyebolt and tighten various things
○ BoltQuantity : Easy installation without troublesome work just by tightening with 2pc. ← This is Bolt with M6 hexagon socket. We use 5 mm hexagonal Wrench.
[Material]
○ ClampBody : Aluminum Eyebolt : Iron tightening Bolt : Stainless
【Actually using】
○ First of all painted in Black with aluminum can for Spray to match color. Aluminum is easy to peel off.
○ Engine Guard (28 φ) , Rear Carrier Frame (24 φ) To Quantity this product : 2pc. Fixed by Set at time.
○ I removed the attached Eyebolt and fixed the Board rackFrame with M8Stainless long eye bolt.
○ Pretty much Clamp sinking is solid, and there is no wobble even when putting about 5 kg of Surfboard + Board Case.
* However, when clamping to RearSeat pipe which is the original usage of this product and fixing to Motorcycle it becomes uneasy at M8 Eyebolt.
* BodyAluminum, Clamp fastening Screw is also M6 so if you try to fix it firmly with hi para etc. there is a possibility of rupture.
○ Since it can be fixed securely and firmly if it is a lightweight item, I think that it is useful Items depending on how you use CameraMount and Drink holder yourself etc.. As far as Engine Guard is concerned, the outer diameter that can be installed is not Exactly!
View detail
It is lightweight, and it folds up, and it can do and is the best for a Mini-van Transporter. Bello's portion applied to the car body is a thick Rubber, and that it is hard to slide, it is hard to attach the crack to a car body, and it has become. A
It is lightweight, and it folds up, and it can do and is the best for a Mini-van Transporter.
Bello's portion applied to the
car body is a thick Rubber, and that it is hard to slide, it is hard to attach the crack to a car body, and it has become.
Although a main use is shipping of a lightweight TRIAL vehicle, a CUB, etc., it can be conveniently used also as an object for human beings when using 2 parallel with the object for Motorcycles for - human beings as assistance when carrying a weight vehicle.
View detail
"The details which are not known on a catalogue is the weight of about 6.5 kg, the state where it folded up (hinge section) at the thickest place is 13.5 cm and at the time of folding is about 210 cm. Compared with a straight type, it is slightly heavy to
"The details which are not known on a catalogue is the weight of about 6.5 kg, the state where it folded up (hinge section) at the thickest place is 13.5 cm and at the time of folding is about 210 cm. Compared with a straight type, it is slightly heavy touch (a 150-cm straight type was very light). The folding state was thin and good rather than I considered. Since the state where it came out and lengthened is that it becomes a character of KU as the image and my delica of the transporter has a height to a floor, the inclination from a ground face to a hinge part becomes fairly tight. Although an inclination would become loose than a straight type conversely if that is passed ... Since the vehicles to stack are a truck and a minimoto, there is no problem in particular, but in case of a trail, it may be slightly difficult. It is a no problem if it is an off vehicle about withstand load! A road motorcycle is not sure .... It is firmly hooked exactly and the resin plate which is on a transporter side is also satisfactory at all for a daily use. Although I thought that it is always extended and folding up only when stacking many stuff, the curve when it lengthens is merely large, and since stacking with extended becomes fairly obstructive, in consideration of it, it is four stars." View detail
"Until now, the scaffold material for construction sites was used for shipping and discharging of an off-motorcycle. Although there was no inconvenience in particular, the place which replaces and hooks a transporter was lost and this product was purchase
"Until now, the scaffold material for construction sites was used for shipping and discharging of an off-motorcycle. Although there was no inconvenience in particular, the place which replaces and hooks a transporter was lost and this product was purchased. Since there are anti-slipping of the rubber in a foot side and a slope in the transporter side, and a level difference at both sides, the demotion of a product became easy markedly. Furthermore, since the tire stopped at the ladder position, a tire is not slipped in the rainy day. Furthermore, since it is foldable, it is a compact. It is recommended. If there is more, it may be 5 stars." View detail
Although it is used for loading of a trial motorcycle, it is satisfied in a user friendly manner. Width is also in reinforcement and satisfactorily enough. However, since it was not so light as it considered, they are four stars.
Although it is used for loading of a trial motorcycle, it is satisfied in a user friendly manner.
Width is also in reinforcement and satisfactorily enough.
However, since it was not so light as it considered, they are four stars.
View detail
Since it is shipping and discharging of a trial motorcycle, in the case of a heavy motorcycle, it does not understand in how, but it is solid than expected, and is hard to slide on a ground surface or a car, and instability does not feel. Since the ru
Since it is shipping and discharging of a trial motorcycle, in the case of a heavy motorcycle, it does not understand in how, but it is solid than expected, and is hard to slide on a ground surface or a car, and instability does not feel.
Since the rubber parts of the tailgate of a transporter are not cracked thanks to rubber parts and its angle, it is good.
Although it is more regrettable to be an impression which it is thick and is bulky than the frame part of both sides thought that it thought that there should just be width to a slight degree, since it is cheaper than other goods also simply [ folding ] and in price, I think that it is very good.
View detail