Reviews
Excellent visibility
This one is used for CRF250RLY50 MOTARDSpec.MD44 and my car Swift Sports31s
It is inexpensive, highly visible, and the cap is easy to remove, so it is great for Small students who check their air pressure frequently.
My only regret is that when I purchased this item from Webig, it was somehow shipped as a Single Item, even though I requested that it be combined with an order that was waiting for another item to arrive.
I was very irritated that I had to pay a ridiculous shipping fee for an item that cost less than 100 yen.
View detail
Cheap, strong, rustproof
This is the same Parts that helped me when I was riding WR250.
By the way, I'm haGap from checking WeBig's compatibility, but CRF250L M RALLY50 MD44 will also fit, 44-47mm will fit, I will let you know.
I purchased this product in conjunction with the purchase of YOSHIMURAExhaust pipe.
As expected, the OEM exhaust clamp was rusty and rusty when removed.
Bolt broke.
I bought it on Amazon Prime, so I placed the order in the afternoon and it arrived first thing the next morning!
View detail
I was able to replace it properly.
I had a DRC Chain tool in the past, and when cutting a 428 chain, the tip of the tool broke off and I had trouble replacing it, so I was distrustful of this manufacturer's products.
This time, I decided to buy it after seeing other people's impressions and videos that seemed to work, and after considering the labor cost to ask the shop to do it.
I started with Chain cut to replace the 520 Chain and was able to cut it with no problem at all.
The work proceeds according to the instruction manual and is completed relatively smoothly until the Plate is press-fitted.
The last Crimp work, the Body is a little smaller than the Material.:Although it was light for aluminum and required considerable force, we managed to install Crimp.
I think it is a great product that can do everything from cut to crimp with just one tool. The size is larger than the previous version and I think it is stronger.
If you want to replace the Chain and Sprocket by yourself, we recommend this product because it is reasonably priced and works well!
View detail
Installed on CRF125F
I installed it on a Honda CRF125F that I usually just ride along the riverbed.
The NORMAL Heat Guard was removed after a few rides with the weld surface flaked off.
I searched for an alternative Universal Product and found this one.
Since it did not match the position of the NORMAL hole on the CRF125F, it was installed by wrapping it directly around the exhaust pipe with a band.
It seems to be able to hold up surprisingly well and do the Heat Guard's job well.
It looks better than NORMAL and I am satisfied with the Large change.
View detail
Good quality, good price
Old rim lock disintegrated and needed a new one. This is almost identical to stock and fit exactly as it should.DRC rim lock is as good as any other rim lock. It weighed considerably less than what I was expecting.I always choice zeta, really quality parts and the best price Easy install but make sure you balance you wheels. View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Way better than rubber rim strip
This makes life so much easier when changing tires. I no longer have to worry about the rim strip moving on me when trying to put the tube in. I like this better than the rubber cover that wears and slides off the spoke ends. You have to clean the rim very well, I use brake cleaner. I change tires a lot and these have been working great. Rubber strips leak, some other strip tapes did not hole up as well. I'll use this again. Worth the extra money.i definetly recommened. View detail
Nice simple solution
much better than using sealant or silicone if you forgot, like did, to fill the rim lock hole before installing tube and tire. Nice simple solution for plugging the extra hole when 2. rim locks are not used.Using these to plug the extra hole in a rim makes the job easier and looks like it came from the OEM. These may be little things, but it's the little things that count to finish a job correctly. View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
Fits: KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KL250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX250, KAWASAKI KX500, YAMAHA WR250Z, YAMAHA YZ250, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KDX200, KAWASAKI SUPER SHERPA, KAWASAKI KLX250R (for competition)
DRCFront sprocket
It was just the right size. This is also adjusted by Rear sprocket. View detail
Fits: KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI Z250 (2013-), KAWASAKI Z250SL, SUZUKI 250SB, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI D-TRACKER-X
DRCFront sprocket
It was just the right size. Now I will adjust it with Rear sprocket. View detail
Fit to Rim
Fit feeling to the rim is also good. It can be tightened.
I happened to find this product and bought it.
I think it was good.
Installation is no problem, just insert the Bolt when fitting it.
I hope it works for mud intrusion and such.
It looks beautiful and I recommend it.
View detail
Replaced because the OEMBlinker can't tell it's blinking in the daytime.
[How is it used?
It became difficult to tell if the OMBlinker was deteriorating over time or if it was blinking in the daytime. This is dangerous. So we decided to replace them with LEDs.
I chose this one because it seems to be for Off-road.
The Relay has already been replaced with an LED-compatible product, so this is the only purchase.
Was the one you received as per Image?
It is hard, although it is described as Rubber-like.
Was the installation difficult?
The work itself is not a problem, but the RightHand guard of our car is distorted, so we had to use the enclosed Attachment parts to make it slant down! (Sweat)
How was your experience with it?
It is brighter and easier to see from oncoming cars, etc.
View detail
I like this one.
I use this one every time.
In this case, it is used for yz85 Silencer.
It is a moderately sized product, but it is Large sturdy without wrapping all the way around.
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
If you want to use footpegLarge, this is the way to go.
Product Name
DRC DRC Chromoly Wide Foot Peg
Item Number
F6245
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
20 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
If you want cheapness and sturdiness with a Large cutoff, I went with this. I also chose this one because it is called DRC.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It may be difficult to go alone, but I think I can go Limit with this...I have to make sure to stop Pin well.
How was your experience with it?
I feel that the footpeg is different when the footpeg is large. Also, the black color is cool.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DRC wheel tool anti-vibration/balancer option 10mm shaft set Product # F4287
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
For use with the 3RW1 that is not the appropriate model year (but requires modification).
Compared to NORMAL, the large size of the footrest surface is obvious.
It is stable, but its thorns are sharp and long, so please use it with hardy boots that can shave off the Sole.
When used in 3RW, the Right Side must be considerably reduced to be able to be overthrown.
And even if it is installed after much effort, the rattling is so great and the return in collapsible mode is so weak that further modification is required.
If you are concerned about the details or if the modification is troublesome, you can install the expensive Bolt On. "ARE" is probably a good idea
View detail
Tandem seat can be installed with Compact
The paint texture is also high, making it Compact and Stylish.
I am satisfied with the rigidity of the Carrier and its use for Tandem.
View detail