Reviews
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
Solid for the price.
The installation was easy with the Instruction Manual included.
Since there is no reflector, I installed DAYTONA's Slim reflector on top of it.
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
optimal solution
It is a good and well-made product.
The OEM Blinker, Stop-lamp, and License Plate Light can all be used and fit perfectly.
The price is low, so I give it the highest rating.
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
It will be attached to the 2023 model.
The angle of Number is too standing.
Bend your own Bracket
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
OEM Product is well utilized.
I have previously purchased one with a light, but this one uses an OEM light and is surprisingly easy to use, just swap out the coupler, no cutting or modification of the wiring required. This is a must buy. View detail
Cool! Fender Eliminator on KLX230SM
I am an amateur, but I tried to convert Kawasaki KLX230SM to Rear fender-less.
There were a wide variety of Types, but I think this is the kid that is cosmetically superior and can shorten Fender the most.
And the color of Lamp. [Color] Smoke will be matched with Body's Black.
It took me about 50 minutes including removal and installation, even though I am an amateur, and it is easy to post on YouTube.
We need to use it in the future to see how much spray will fly in the rain, how much spray will be applied to the Lamp, and to confirm that it is waterproof.
View detail
It's a good look
[How is it used?
Mounted on KLX230SM
Was the one you received as per Image?
Street Image
Was the installation difficult?
It is necessary to remove the entire Cowl, but it is easy.
How was your experience with it?
Overall, it is Compact and Refreshing.
[Included Parts:were they on?
Translation (easy to understand with Instruction Manual for enter here)
[Was there anything that disappointed you?
Too bad Reflector is not included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
My buttocks are now Parenthesis better.
Stylish and Parenthesis better!
Installation is no problem and can be completed in an hour.
View detail
Can be installed on KLX150BF (Tail cowl drilling 2 holes only)
The blinker can be installed on the KLX150BF because I wanted to use the blinker as it is. View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
Style is good! Easy to install!
At first, I was worried about the Fender Eliminator Kit made by Endurance, but I preferred the design of this one, so I bought the one made by DRC.
OEM License Plate Light can be ported, but Reflector is required separately.
There is no need for any special modifications, etc., and even beginners can install the Bolt, as it is simply removed, installed, and put back together.
Fender EliminatorSingle Body would be cheaper than the Endurance product, but if you buy the Reflector, you end up paying about the same Gold amount.
View detail
Requires one step for Waterproof processing
[How is it used? daily use
Was the one you received as per Image? Street Image
Was the installation difficult? The work content is just enough that anyone can do it, and Wiring is also Coupler-installed, so there is no need to play around with it.
How was your experience with it? Exclusive Design so it fits nicely.
[Included Parts:were they on? Included Parts:are all included.
[Was there anything that disappointed you? Waterproof treatment is required. We used rubber boards and foam, but it is quite time consuming.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Even without the Instruction Manual, anyone can simply remove and attach the Screws, so there is no problem.
Reflector does not come with the product, so it must be prepared separately.
View detail
Drc motoled
This one was not so aesy to install i had to modify it slightly there is no protection for water so you have to make one yourself. After a little modification i am satisfied and it looks awasome View detail
Looks good, but not strong enough to be used Off.
[How is it used?
Forest Road - Mountain Play
Was the one you received as per Image?
It was basically as pictured, but when I picked up the actual item, it was more delicate than I thought it would be.
Was the installation difficult?
Structurally, it was simple, but there was only one diagram that wasn't very clear, so
I was troubled a little by the replacement of the Bracket which is positioning the Rear Fender.
Other than that, it's a mysterious structure with Washer between Frame and Kit and Bolt from top and bottom.
When assembling, the Washer between the two falls out and it is very difficult to work.
If you use high viscosity grease to hold the position, you can do it....
How was your experience with it?
It looks nicer and it's easier to change Tire with more Space.
However, this was not strong enough at all to use it in Off-road though I had imagined it somehow.
Even if you fall lightly and the Number gets stuck in the soil, the Plate will bend in the direction of the day after tomorrow.
It may be for weight reduction, but it's a structure that simply bends a not-so-thick board, so
It is easy to say that it is easy to bend back by hand, but it is likely to break while driving by the fatigue of genus Gold sooner or later.
I bought this product because there is no Fender Eliminator other than this product at present.
It seems better to think of it as a bridge until a product with a little more strength is released.
[Included Parts:were they on?
It was on without excess or deficiency.
[Was there anything that disappointed you?
It's not as strong as I thought it would be.
View detail
You had better stop buying
After installation, operation checked, Stop-lamp did not turn on!
There is no mistake in Wiring, even if it is attached to NORMAL and confirmed, the body side has no problem!
We changed Wiring and confirmed the Tail lamp and Stop-lamp separately
Because the illuminance is the same, it turns out that it does not understand even if Stop-lamp is turned on!
Since it can not be used as it is, purchase LED Tail Lamp separately!
It has become useless expenses.
View detail
Become a D-tiger late Fender
I was concerned about the hanging shape of the Dragon's Rear Fender of the previous term and bought this item in accordance with the exchange to the late Fender.
Processing was necessary for installation but it was easy to process because Plastic.
It looks better from Rear.
I wondered whether to make Lens Red or Black, but I think that it was correct on Black.
View detail
I think that it is a bargain.
Material is soft and easy to process, but it has enough rigidity and it seems to be used for a long time.
The LED is also bright, I think that this price is cheap with this.
The XG250 TRICKER combines with two holes in the original Rear Fender under Seat, one hole originally in the Frame, and a total of five places tightened together with Bolt for Seat installation.
Since the License Plate interfered with the Stop lamp and could not be attached, the License Plate mounting hole was expanded downward.
View detail
Favorite
Rear fender also used for XR 250.
This time I tried installing it to KLX 125.
Processing is necessary because it is not a special item, but it has become a good feeling.
View detail
It becomes fearless
【What made you decide the purchase?】 The number of peripheral Parts such as Design, Blinker, License Plate Holder, Reflector
【How was it actually used?】 Tail has been tightened very compelling but very visibly though it is Compact.
【Was it difficult to install? (Hard parts case)】 It is a little troublesome to make Base for installation with Frame to Bracket. Even if Base can be done it is easy to drill and Wiring etc Spec. It has become.
【Please tell me the point of installation and hang (in the case of Hard parts)】 I think that it is unlikely that it is possible to install directly by diverting an existing Frame hole and therefore to make a base for mounting exactly.
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please let me know if there are any improvement points】 I want Repair Parts to continue for a long time as durability can not be said anything.
【Have you compared items?】 DRC's EDTail
View detail
It is not so expensive and the circumference of rear one also feels pure lay refreshed. attachment did not suffer troubles, either, and since it was warned at an angle of the Number, it does not become precocious. Although the Lens chose t
It is not so expensive and the circumference of rear one also feels pure lay refreshed.
attachment did not suffer troubles, either, and since it was warned at an angle of the Number, it does not become precocious.
Although the
Lens chose the Smoke, when it is a Smoke, each Lamp is conspicuous and it is doing
lighting of it.
He buys it truly [ he is smart and ], and I think that it was good.
View detail
Although the Fender less kit which was being used before was an Aluminum raw material and appearance was good, it broke with vibration (2 times) and equipped with here made of resin. Although it was goods of general-purpose article, there is the exis
Although the Fender less kit which was being used before was an Aluminum raw material and appearance was good, it broke with vibration (2 times) and equipped with here made of resin.
Although it was goods of
general-purpose article, there is the existing round Frame in the tail part of DR-Z, and it became fairly obstructive for equipping with a Bolt.
Since it was firmly attached that it is unexpected although a defiant attitude was assumed and Cable-tie wearing was carried out that it is provisional and simply, use was continued as it was, but it was a Notebook rabble, without breaking in vibration.
A resin material is for Off vehicles too.
It is the Point which is especially pleased with the Fender of feeling toward the
a little top.
View detail
It is used for the fender less of KLX125. Although little processing was naturally required, in the smartness, it is large satisfaction. Although he wanted to carry a photograph, the motorcycle was stolen after that.
It is used for the fender less of KLX125.
Although little processing was naturally required, in the smartness, it is large satisfaction.
Although he wanted to carry a photograph, the motorcycle was stolen after that.
View detail