Reviews
Good quality, good price
Old rim lock disintegrated and needed a new one. This is almost identical to stock and fit exactly as it should.DRC rim lock is as good as any other rim lock. It weighed considerably less than what I was expecting.I always choice zeta, really quality parts and the best price Easy install but make sure you balance you wheels. View detail
Way better than rubber rim strip
This makes life so much easier when changing tires. I no longer have to worry about the rim strip moving on me when trying to put the tube in. I like this better than the rubber cover that wears and slides off the spoke ends. You have to clean the rim very well, I use brake cleaner. I change tires a lot and these have been working great. Rubber strips leak, some other strip tapes did not hole up as well. I'll use this again. Worth the extra money.i definetly recommened. View detail
Nice simple solution
much better than using sealant or silicone if you forgot, like did, to fill the rim lock hole before installing tube and tire. Nice simple solution for plugging the extra hole when 2. rim locks are not used.Using these to plug the extra hole in a rim makes the job easier and looks like it came from the OEM. These may be little things, but it's the little things that count to finish a job correctly. View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
Fits: KTM 500EXC-F, KTM 690EDRR, KTM 450EXC-F, KTM 450SX-F, KTM 350SX-F, KTM 300EXC, KTM 350EXC-F, KTM 250SX, KTM 250SX-F, KTM 250EXC-F, HONDA CRF250R, HONDA CRF450R, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, SUZUKI RMZ250, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450
To help us help you.
Product Name
DRC DRC FrontStack Belt
Item Number
D6426
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
5 minutes
Required Tools
Scissors type, etc. would be perfect.
Why did you choose this product?
I chose this one because with this product, I will be able to get help from anyone in case of Race, etc. I also chose this product because of its low price.
Was the one you received as per Image?
It was exactly as shown in the Image. It was more solid than I expected for the price. I hope someone will see this product and help me.
Was the installation difficult?
Installation was not that difficult.
How was your experience with it?
It is not something that you feel particularly when you are running, but I think you will feel glad that you have it in case of an emergency.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
Roughness is noticeable but sufficient Level
The end of the cord is divided into a Headlight wire and a Connector that holds together the OthersBlinker and other components.
It looks like Gold genus and is a bit heavy.
Blinker also has a slightly unique switch. Normally, the switch can be returned to the center position by pressing it lightly, but this switch will not return. You need to return it to the Center position by yourself. It is so difficult to return that the opposite Blinker will be attached if you do not press it with a good degree of force.
View detail
Horn.
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
If you energize it and turn on the Switch, you can use it normally.
The volume is also sufficient.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
Often used in racing vehicles.
Open valve pressure can be increased to 1.6 kg from OEM.
Recommended for harsh environments like Race.
It can reduce the likelihood of Overheat.
When I hear DRC, I think of Off-road Image, but I use it for On road motorcycle.
View detail
Radiator hose
Used for MD47
Purchased while replacing Coolant
Softer and easier to insert than OEM
If you remove the Radiator without sidestepping it.
No problem working on the other side.
Glossy Red may not be to your liking.
View detail
Can also be installed on SUPER CUB110 JA59
Installed on SUPER CUB110 JA59.
The work itself can be easily installed with no problem at all, but it is too long for the SUPER CUB and the body will stand up a little.
View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY, HONDA CRF250L
A little bit of installation. ? Will be
As others have mentioned in the review, the convex part to fit the lower cosmetic bolt×1 and the upper OEM bolt×2 do not fit if they are left as they are.
The lower inner side is fitted by grasping and compressing the inner side with your hand.
I am a little impatient because this area is not in the Instruction Manual.
I am not sure if it is only for the 2023 model, but there is a 5mm pin hole on the inner cowl side, which is flooded with slop water, so I filled it with Pate.
You can see it when you actually fit it, but it is a pin hole that does not bother you that much, so those who do not mind may not mind it.
I wanted the Fender angle to be a little more warped, but since it is a regulatory Limit, other Fender Eliminators may be the same.
View detail
Easily change colors.
It is easy to change the color to match the car body color.
It is a general offfor vehicle shape, so changing the color does not affect the operability of the vehicle.
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
Solid for the price.
The installation was easy with the Instruction Manual included.
Since there is no reflector, I installed DAYTONA's Slim reflector on top of it.
View detail
Rod holder usage
The rod holder is low, so even a slightly longer rod can be fished. View detail
Fits: KAWASAKI KX450, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KDX125SR, KAWASAKI KDX200-250R, KAWASAKI KDX200-250SR, KAWASAKI KLX250, KAWASAKI KLX250SR, KAWASAKI KLX250ES, KAWASAKI KLX300R, KAWASAKI KLX300SR, KAWASAKI KLX300ES, KAWASAKI D-TRACKER, SUZUKI RM-Z250
If durability is more important than weight, this is the one for you!
I chose this model for its durability since I mainly use it for day touring and walking in the woods. The material is steel, so it is heavier than it looks. I don't think it's necessary to use Aluminum or something like that unless you're going to Race. View detail
Fits: YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR400F-450F, YAMAHA WR450F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA WR400F-450F, YAMAHA WR400F, YAMAHA YZ85, YAMAHA YZ65, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F
Huge upgrade over stock pegs,Excellent quality and Wide sturdy grip.
Very solid footing with these and they have already withstood a couple of hard falls! Surprising what a difference these make compared to stock! Excellent pegs. Feels like a have a front porch worth of room for my feet to stand on, and they grip to the bottom of my boots like super glue. Easy to install and improved grip noticeably over stock foot pegs.I will say you may have to tweak your stock peg springs to fit around these monsters but still only took 10 min to install both. Great Product, Highly Recommend,webike too fast shipping View detail
Fits: HONDA CROSS CUB110, HONDA CROSS CUB110, HONDA CROSS CUB110
Appearance and performance ◎Installation ×.
The first thing I want to say is that the installation was too difficult.
I installed it on a CROSSCUB110,
Saying it was difficult was also a task that required a lot of strength.
I don't know the proper way to do it because there was no instruction manual, but I made full use of various tools, and I think it ended up taking about 2 hours.
Quantity Spring to Peg:I tried to stick a fixed pin in the set state, but the spring was too hard and I didn't feel it would go in.
To be honest, I almost lost heart several times, but eventually I was able to push it in and install it with the Resin Hammer before my grip ran out.
And the other side was also installed and I was in despair, but I was able to get it on easily without the use of a resin hammeretc.
Is there something like hang,,
I don't know if it's Sense or luck, but I've heard many people say it's difficult to install, so I'd like to see an instruction manual included.
If force is required, it would be nice to have a jig etc. for easy installation.
It would be great if the installation was just finished.
It looks much different and the Grip works well in the rain and gives me a sense of security.
I am happy with the Standing, it is stable and cool to drive.
I do not want to remove it. LOL.
View detail
Fits: SUZUKI RMX250S, SUZUKI RMX250R, SUZUKI RM250, SUZUKI RM125, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400R, SUZUKI DR-Z400E
reasonable price
I recommend this as a very basic model.
I recommend it for both price and durability. Of course, it also helps in terms of appearance.
It is more helpful in terms of neatness than the rubber plate of the original footrest. I think that such small details are of great help when tuning.
The shoes fit perfectly into the body! Avoid bare feet
-------------------------------------------------- -------- Recommended as a very basic model. Recommended in terms of price or durability. Of course, it helps in appearance. It is more helpful than the rubber plate of the genre of the footsteps. Shoes are just wrapped in the body! Please refrain from bare feet Powered by Google Translator
View detail