Reviews
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
It is used for MADASS125. Although MADASS is a Seal chain of 428 Sizes from the first, when it is the Seal chain, it is the specification which interferes in a Drive Sprocket cover. a smile -- -- interference can be prevented, even
It is used for MADASS125.
Although
MADASS is a Seal chain of 428 Sizes from the first, when it is the
Seal chain, it is the specification which interferes in a Drive Sprocket cover.
a smile --
-- interference can be prevented, even if this is stopped [ 21->19-mm ] Chain width by using a Non-seal and does not put a Washer etc. into the
Cover.
Since the
Chain itself serves as vehicles of 20 horsepower or less, if it is a Normal engine of
actual condition, it does not have fault, either.
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, HONDA CT125, HONDA CT110 HUNTER CUB, HONDA CT110 HUNTER CUB, HONDA CT110 HUNTER CUB, HONDA CROSS CUB, HONDA CRF125F, HONDA CRF100F, HONDA CM125T, HONDA CD125T-II, HONDA CD125T-I, HONDA CBX125F, HONDA CBX125C, HONDA CBR125R, HONDA CB125TZ, HONDA CB125TB
Since the Chain had adhered to for a while, it exchanged. -- the point that it is not necessary to cut a Chain whatever the reason for purchase may say this Chain -- it remains as it is -- wearing OK! exchange is finished with several minutes ^^
Since the Chain had adhered to for a while, it exchanged.
-- the point that it is not necessary to cut a Chain whatever the reason for purchase may say this Chain -- it remains as it is -- wearing OK!
exchange is finished with several minutes ^^
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, YAMAHA POCKE, YAMAHA GT80, YAMAHA GT50, YAMAHA DT50R, YAMAHA DT50, YAMAHA CHAPPY50, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX
a Sale -- purchase -- although it is common, a Cost performance thinks that it is good.
a Sale -- purchase
-- although it is common, a Cost performance thinks that it is good.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, YAMAHA POCKE, YAMAHA GT80, YAMAHA GT50, YAMAHA DT50R, YAMAHA DT50, YAMAHA CHAPPY50, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX
Although it was Chain exchange, it was able to do by itself.Probably, the engine performance will be infallible since exchanged 25-year Saki's Chain was also Dido.
Although it was Chain exchange, it was able to do by itself.Probably, the engine performance will be infallible since exchanged 25-year Saki's Chain was also Dido. View detail
Fits: YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA SRX400, SUZUKI MARAUDER125, SUZUKI K125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER GIXXER 150, SUZUKI GIXXER GIXXER, SUZUKI DJEBEL125, SUZUKI DF125E, YAMAHA XG250 TRICKER (XG250), YAMAHA SEROW(SEROW)250, YAMAHA ZEAL250, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YBR250, YAMAHA XTZ125E, YAMAHA XT350
it is used for a VT250 SPADA -- coming to swerve also from weight, even if compared with other company -- it is -- he feels easy equal and accuracy. which can be used If it complains by force, are and initial growth out of which a Ru
it is used for a VT250 SPADA -- coming to swerve also from weight, even if compared with
other company -- it is -- he feels easy equal and
accuracy.
which can be used If it complains by force, are
and initial growth out of which a Rust tends to come than the thing of
and the other company in a core part only which come out from the other company? If
Maintenance without the fault of such a fault is not neglected, it lasts long very well.
View detail
Since the work of Chain exchange can be performed briefly, convenience of a Chain Cut & Crimp tool is done. Since it was occasionally asked for Chain exchange in the motorized Class, 40 set was prepared. Since form hardly changes t
Since the work of Chain exchange can be performed briefly,
convenience of a Chain Cut & Crimp tool is done.
Since it was occasionally asked for Chain exchange in the motorized Class,
40 set was prepared.
Since
form hardly changes to 50, it is dramatically user-friendly like the object for 50.
Although the direction of others has told about
dissatisfaction, is it a box?
-- putting into a plastic box, since it is an appropriate price --
-- the kana which he wanted.
View detail
It purchased with the simple substance of the Crimp & Pin Cutter. It is since it broke as to why it is. (At the time of Chain exchange of the tear younger generation's Motorcycle, when cutting, and it fastens without noticing That th
It purchased with the simple substance of the Crimp & Pin Cutter.
It is since it broke as to why it is.
(At the time of Chain exchange of the tear
younger generation's Motorcycle, when cutting, and it fastens without noticing
That the pin had shifted and that [ ? ] is thought, it is
pin bend & tip 欠けた.)
orz
-- since it presses down with a Screw although it is a mistake simply -- a thing --
that uncanny power is applied and a pin -- quenching steel -- since like, it will be in such a state.
Let's check perfectly before fastening at the time of
work.
(T_T) Be [ going to carry out with
あ and a single article / just / it / part purchase / by disposing / where Mr. Maru is uncanny / good ].
View detail
Fits: HONDA CRF250R, KAWASAKI KLX230, HONDA CRM125, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, SUZUKI RM250, KTM 200 EXC, KTM 150 XC-W, KTM 150 SX, KTM 125 XC-W PTI, KTM 125 XC-W, KTM 125 SX, KTM 125 GS, KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250
Attachment has also been attached without difficulty with an easy Clip. A motion is smooth and I feel that the car body became light.
Attachment has also been attached without difficulty with an easy Clip. A motion is smooth and I feel that the car body became light. View detail
Fits: KAWASAKI ZZR600, KAWASAKI GPX750R, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100 type II, HONDA CB1100, YAMAHA FZX750, YAMAHA XJ400D, YAMAHA XJ400, YAMAHA TX650A, YAMAHA TX650, YAMAHA TX650, YAMAHA SR500, YAMAHA RZV500R, YAMAHA RZ350, YAMAHA MT-01, YAMAHA FZX750, YAMAHA FZS600 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZR750
[Webike Monitor] Chain exchange of XJR1300. Since it was somewhat cheap, the Silver was chosen, but since it is a beautiful Plating, there is no cheapness. Since attachment was the pure number of LINKs, it was easy only at Crimp work. The
[Webike Monitor] Chain exchange of
XJR1300.
Since it was somewhat cheap, the Silver was chosen, but since it is a beautiful Plating, there is no cheapness.
Since
attachment was the pure number of LINKs, it was easy only at Crimp work.
The sectional shape of the
Seal is a form which is hard to describe, and, unlike an ordinary O ring, is smooth. [ of a motion ]
Since it is smeared with most quantity of the Grease if
one difficulty is said, wiping is serious.
View detail
The tool of Chain exchange did not stray but purchased reliance and a popular Chain Cut & Crimp tool. Work also referred to a description and how to use the Chain Cut & Crimp tool of Dido's Homepage, and has exchanged them for the Smooth. Although i
The tool of Chain exchange did not stray but purchased reliance and a popular Chain Cut & Crimp tool.
Work also referred to a description and how to use the Chain Cut & Crimp tool of
Dido's Homepage, and has exchanged them for the Smooth.
Although it was used with the Black Chain of RK this time [
], the crack took lessons from the Plate at the time of Plate press fit, and it brought a regrettable result.
Since there is no problem in a run, a crack is due to paint and to be ended.
Is it satisfactory if it is Dido's Chain?
The Chain Cut & Crimp tool was purchased and it was a correct answer.
View detail
Fits: YAMAHA SRX400, YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA TT250R RAID, HONDA CB125R, HONDA CBR125R, HONDA CBR250R, HONDA CBR250RR, HONDA CT200, HONDA SPADA (VT250), HONDA XLR250, HONDA XLR250, YAMAHA BRONCO, YAMAHA DRAG STAR250, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT200, YAMAHA DT200R, YAMAHA DT230 LANZA, YAMAHA FZ250 FAZER
the Motorcycle-shop Mechanic who has been indebted, and -- it is extended in early stages of as my common opinion, and DID is better than a Manufacturer besides in respect of durability and a Cost -- it is ~. -- かなぁ -- until it b
the Motorcycle-shop Mechanic who has been indebted, and
-- it is extended in early stages of
as my common opinion, and DID is better than a Manufacturer besides
in respect of durability and a Cost -- it is ~.
-- かなぁ -- until it becomes impossible to compensate with ~ り走りまくり
Chain influence.
growth -- -- managing -- coming out -- Caracalla -- sound -- carrying out -- -- a run -- inside -- a CHALY -- a CHALY -- 言う -- up to -- using up -- -- last time -- it is the same -- this -- having decided -- ♪ -- -- -- DID is used also when carrying out Chain exchange next!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX, APRILIA 50RS, KAWASAKI KX85-II, KAWASAKI KX85, KAWASAKI KX80-II, KAWASAKI KX80
[Webike Monitor] The Rear tire of KSR is equipped with 120/80-12. A rumor although he wanted to put in a O-ring Chain, that it hits the SIDE of a Tire. When looking for the Non-seal chain there, since it stopped at eyes by chance at the
[Webike Monitor] The Rear tire of
KSR is equipped with 120/80-12.
A rumor although he wanted to put in a
O-ring Chain, that it hits the SIDE of a Tire.
When looking for the Non-seal chain there, since it stopped at eyes by chance at the time of a Sale, it tried.
I think that it probably lasts long by the announcement with
420 strongest, and the thinness of a 2 strike 80cc Torque.
Since it is
order Sprocket and simultaneous exchange, it is very quiet and there is also almost no initial growth.
Since it is hard to rust thanks to the
Plating, it polishes without reserve and puts.
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
Although the Chain with which YZF-R125 is equipped from the first was a Seal chain of DID, since the Clearance of a Tire and a Chain was last-minute, the goods of the width which can carry out [ Gold chain ]-izing in comfort had only this. Since the colo
Although the Chain with which YZF-R125 is equipped from the first was a Seal chain of DID, since the Clearance of a Tire and a Chain was last-minute, the goods of the width which can carry out [ Gold chain ]-izing in comfort had only this.
Since the color of the Brakes caliper is suited and it looked very finely when
(other goods may be OK if it actually equips)
Gold chain was formed, it has been very much satisfied.
Moreover, by having used the Non-seal chain, a light feeling like immediately after always spurting out ルブ to a Seal chain was able to be felt.
I think the body whose Friction decreased clearly.
, however those that think that a Chain Maintenance is troublesome since it is extended comparatively a little early even if it is maintaining by attaching ルブ briskly consider that it is better to use a Seal chain.
View detail
Chain exchange of HONDA CB1300SB was challenged for the first time. purchase Points were a price, durability, and operativity. Although there were also sure a little cheaper goods, much Review was seen and it was felt as the correct product.
Chain exchange of HONDA CB1300SB was challenged for the first time.
purchase Points were a price, durability, and operativity.
Although there were also sure a little cheaper goods, much Review was seen and it was felt as the correct product.
Product precision is also high by an obviously dogged Parts.
When pulling out the pin of an old Chain, the head of the pin pulled out so that an extrusion pin may not be damaged was deleted, but there were also still nothings, and it kept pushing on the Smooth and was made to it.
Is it satisfactory even if it possibly does not delete?
If it carries out by checking carefully as all work is a description, it will be the outstanding specialized tool which anyone can use certainly.
As a tool which can perform the Cutter, press fit, and calking of the
Chain, they are very goods of recommendation!
Even when a Parts breaks, the point that the Repair is substantial should also think whether to be the cause which may be User-like and sells.
View detail
Fits: KAWASAKI KLX230, SUZUKI RM250, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA CRM125, HONDA CRF250R, KAWASAKI KX125, KAWASAKI KL250E, KAWASAKI KL250D, KAWASAKI KL250 C, KAWASAKI KL250 B, KAWASAKI KL250 A, KAWASAKI KL250, KAWASAKI KDX200R D, KAWASAKI KDX200R C, KAWASAKI KDX200R B, SUZUKI VanVan(VANVAN)200, SUZUKI VanVan(VANVAN)200, SUZUKI VanVan(VANVAN)200
[ -- the Webike Monitor ] -- they are not reasonably priced goods and a bad meaning. If it does not go out suddenly since the Chains are consumable goods, the duty has achieved. After will be evaluated later on, if bad to the problem of gr
[ -- the Webike Monitor ]
-- they are not reasonably priced goods and a bad meaning.
If it does not go out suddenly since the
Chains are consumable goods, the duty has achieved.
After
will be evaluated later on, if bad to the problem of growth, and an extreme.
With no problem for the moment.
View detail
[a Webike Monitor] -- exchange of a DID Chain -- oneself -- preparations and Chain Cut & Crimp tool # -- the Set was purchased 50 system. The manner of use etc. are written in detail, and have been attached satisfactorily. However, it was heav
[a Webike Monitor] -- exchange of a DID Chain -- oneself -- preparations and Chain Cut & Crimp tool # -- the Set was purchased 50 system.
The
manner of use etc. are written in detail, and have been attached satisfactorily.
However, it was heavy labor as it is unexpected.
If it is this price, I think that I wanted you to devise so that it can do a little more simply.
View detail
there may be only a product which the Chain Manufacturer is taking out with its own signboard truly -- mono-. Although there is a cheap thing which H form carried out as for the product made from Aluminum, it breaks immediately after all. The R
there may be only a product which the Chain Manufacturer is taking out with its own signboard truly -- mono-.
Although there is a cheap thing which H form carried out as for the product made from
Aluminum, it breaks immediately after all.
The Recommendation of thinking that it was deluded also with the direction which is going to carry out Chain exchange (a Cut, press fit, and Crimp) by itself for the first time, and using this from the beginning is carried out.
Although it is a product made from
DID, of course, anything can be used also by RK.
A 27-mm Wrench is required to hold a main part for work.
Probably, it is good to prepare power or a firm thing as it is, since it borrowed.
View detail
Fits: KAWASAKI ZZR600, KAWASAKI GPX750R, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100 type II, HONDA CB1100, YAMAHA FZX750, YAMAHA XJ400D, YAMAHA XJ400, YAMAHA TX650A, YAMAHA TX650, YAMAHA TX650, YAMAHA SR500, YAMAHA RZV500R, YAMAHA RZ350, YAMAHA MT-01, YAMAHA FZX750, YAMAHA FZS600 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZR750
[Webike Monitor] Since DID was a Sale exactly when many things were investigated by things as 、 which will be changed soon truly, since it did not Chain exchange for 12 years, it chose here. Since the Gold seemed somehow ordinary, the color
[Webike Monitor] Since DID was a Sale exactly when many things were investigated by things as 、 which will be changed soon truly, since it did not Chain exchange for
12 years, it chose here.
Since the Gold seemed somehow ordinary, the
color is a Silver.
It is exchange quickly in a
DID Chain Cut & Crimp tool (although it ran into difficulties just for a moment).
The
new article is wonderful!! It became very quiet! It is a Polished in it!! It is good touch although slightly cheap touch is also carried out!!
View detail
[Webike Monitor] It is cheaper than made in tool Manufacturer, and is a price more expensive than the product made from an Aluminum, and exquisite. I think that it is anxious in case of the product made from an Aluminum since the tool was b
[Webike Monitor] It is cheaper than made in
tool Manufacturer, and is a price more expensive than the product made from an Aluminum, and exquisite.
I think that it is anxious in case of the product made from an Aluminum since the tool was broken repeatedly, but it is the relief ? since the product here is iron.
Although work was done looking at a description instantly, and Cut and press fit were performed to the Smooth, it ran into difficulties for a while by the Crimp.
Although it had written to the
description, Turn until a pin and a Chain contact, the splendid power of shutting to there it being hard to check the portion which touches in practice (R attaching a few to the pin) was needed.
Merit that's right way it caulked a pin stopping having separated from the Chain this time, and checking just for a moment, when it shut until it actually contacted.
Let's work carefully (still more the point [ Even if it says ] ?) next time.
View detail
Fits: KAWASAKI ZZR600, KAWASAKI GPX750R, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100 type II, HONDA CB1100, YAMAHA FZX750, YAMAHA XJ400D, YAMAHA XJ400, YAMAHA TX650A, YAMAHA TX650, YAMAHA TX650, YAMAHA SR500, YAMAHA RZV500R, YAMAHA RZ350, YAMAHA MT-01, YAMAHA FZX750, YAMAHA FZS600 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZR750
Although it was a Chain considered to have followed from 630 Kit ? which carries out a Size Down 530, since I did not understand [ what Manufacturer it is also or ], it exchanged to the DID strongest Chain of the reliance at the time of a 1105-cc Full tun
Although it was a Chain considered to have followed from 630 Kit ? which carries out a Size Down 530, since I did not understand [ what Manufacturer it is also or ], it exchanged to the DID strongest Chain of the reliance at the time of a 1105-cc Full tune. Sense of security is completely different. It is not a place on which he skimps. View detail