Reviews
520Chain Exchange
I purchased this for Chain replacement.
It is easy to understand if you DID watch YouTube before working on it.
hang carefully and accurately.
View detail
Spare parts for Kashimaru-kun
I broke a Pin during Chain cut, so I bought the part. View detail
First Chain Exchange
First time to exchange Chain, Cut & Kashime without any problem.
But how much Plate press-fit and how much Crimp should I do?
I couldn't make a decision and managed to do so with the help of others.
View detail
This is it! Well done!
Although it is expensive, it was surprisingly easy to replace the chain when the essentials were grasped and used. The chain I bought was too long, so I cut it with the same number of links.
Cut:Cut the head of LINK with File until there is almost no difference between LINK and Chain. Cut Kashimaru-kun to Quantity:I checked the position of the LINK and Shimamaru-kun and tightened Shimamaru-kun's Screw halfway around to check the position gap. Then, the screw was easily pulled out.
Press-fitting:Apply plenty of grease to the O-ring and surrounding area, and press-fit the plate. When the screw tightening becomes heavy, remove the "Kashimaru-kun" and check the press-fit condition. Check the height of the plate by applying Scale to the next Chain Plate and the press-fit Plate as shown in the photo!
Crimping:Kashimaru-kun is rearranged for Crimping and Crimping begins. After the machine is heavy, check the Crimp condition and confirm that there is not enough Crimp by comparing with the picture in the instruction manual. As shown in the picture, take the side to be crimped in your hand and check the gap between the plate and the crimp. If there is a gap, the Crimp is insufficient. Re-qualify the Crimp.:Set and crimp the screw, and when the screw became heavy, check the crimp condition again and this time it was OK.:The second pc was the same, and I was able to Crimp the second time, so I felt that I did not have to break Kashimaru-kun if I thought about completing the press-in and Crimp in the second time, rather than finishing it in the first time.
After the test run, it was found that there was no problem, and the results were good.
Now that I understand how to use it, I would like to use this Kashimaru-kun for Large things.
View detail
Pin is weak.
You can find a video of how to use it on YouTube.
It was easy to work with, though,
Not suitable for LINK number adjustment.
I didn't see the Chain adjustment in the video to begin with.
I worked with the same capacity as it was and the Pin broke.
Recommendation to purchase a Pin Cutter (sold separately) just in case.
The product itself is easy to use, but requires 19 and 27 Glasses.
View detail
Note that it is Closed End.
I bought this one from a famous manufacturer because I couldn't find a position where the rattles were large enough with a cheap tool.
I wish there was something like a die-cut sponge.
The compactness of the tool without the handlebar section is also good since it is used infrequently.
However, a 27mm Wrench is needed as a replacement for the handlebar, and since it is not fixed, it comes off every time it is tilted, which is depressing, and the tightening side is 19mm.
The screw that holds the piece in place has a minus head, but it is not easy to work with, so I would like it to be hexagonal.
The other company's product has an open end, so it can be worked after the Sprocket, but this one has a closed end, so it must be worked under the Swing Arm, which makes it difficult to apply force, and depending on the shape of the Swing Arm, it may be even more difficult to work on.
This makes the rigidity of the Tool and the fixation and positioning of the Plate easier.
The product was considerably better than the cheap ones but could be improved in many ways.
View detail
It's also heavy.
I have not used it yet, but I think the thing is very well made. I was worried about buying an inexpensive tool, but I was right in buying this product. It looks like I can use it for a long time. The storage case is stylish too! View detail
Even better if it's cheap.
It's pretty easy to use, and it's solid, so unless you're really bad at it, there's no chance of damage or other mistakes.
If you watch the video on the product page, you will have even more problems.
I just wish it was a little cheaper.
View detail
Standard Chain Cut/Caulking Tool
Used for Cut and Crimp in 525Chain.
This is a special tool for the standard Chain.
It is made by D.I.D. but can be used for non-D.I.D. Chain.
In addition to this product, please use the following
27mm GlassesorSpanner
19mm GlassesorSpannerorSocket tool
is required
It is recommended to prepare a tool with some length because it takes a certain amount of force when crimping.
As for the cut, the 525 size OEM chain was able to be removed without any difficulty by skipping the head of the pin.
When I google how to skip the head, I get the impression that a lot of people use Grinder, but if you are so inclined, you can also use a bar file for ironwork.
I went with Leutor and was able to cut it down to a tura in a couple of minutes.
Probably if you skip this step, the Pin corruption Risk will jump up…
However, some chain manufacturers provide the dimensions on their website so that the amount of press-fitting and crimping can be managed quantitatively.
If you check this and manage it properly with Caliper etc., even a beginner can complete the work accurately.
D.I.D→http://didmc.com/chain/sizemeyasu
RK→https://mc.rk-japan.co.jp/wp-content/uploads/kashime.pdf
Drive chain is sold in the store at almost a fixed price, while Net mail order is sold at a considerable discount rate to ConStunt.
The Merit of self-maintenance is the Large Threshold, not only because of the labor cost reduction, but also because the same parts can be obtained at a discount.
However, the chain is an important security part, so you should prepare a reliable tool like this product and ask for help from someone who is familiar with the chain.
View detail
DID Kashimaru Rivet & Cutter Pin
A device for extruding the pins of the chain connection. It fits into the groove in the center bolt of the DID chain puller. On one side of the fixture there is a riveter for connecting the chain, and on the other there is a pressure pin. The mechanism itself is hardened and very fragile. If you press out incorrectly, you can break the pin. I already did it. But I still recommend it. View detail
I thought I couldn't break...
I've used the Chain Cut & Crimp tool many times to do chain swaps.
I thought there was no way I could break the Pin Cutter, but I did.
I was caught off guard.
You probably didn't hit it straight.
Repair Parts is here to help you in the future.
However, the price might be high?
View detail
428Chain can be found at ・・・・
Chain Cut & Crimp tool #50 series is a dedicated tool for Cut & Crimp of 520-525-530-532Size. This time, My GROM which was changed to 428 Chain... Chain Cut & Crimp tool #50 series To cut and crimp 428Chain, you can use "#40 series Option It will cost you more, but you will be able to maintain your car by yourself and you will love it more and more. It was the first time for me to work on the seal chain and crimp. The chain I used was the EK-QXRing Seal chain 428ZVX. It was another company's product, but it could cut and crimp safely. View detail
As a backup in case it breaks.
It often breaks when cutting, and I don't want to postpone maintenance because I don't have a replacement pin, so I bought it as a spare.
If you do it in a hurry, you won't have to break it …
View detail
Is good
Although there is, there is a crimp Pin, pulling out Pin, when you caulk, you can hang out with Pin and break it .... Is it natural?. When crimping, I have to reverse it properly. View detail
It's worth purchasing and trying out for yourself
I was planning to exchange at Shop, but DID's
I think I can also watch Crimp videos and buy it
I did Crimp.
You can fully complete Crimp yourself.
However, because it is Drive system ChainCrimp
I was slightly worried, but once I finished working and tried running
I was relieved to be relieved.
View detail
Because it is an important security part, those who are not confident go to Shop
As the mileage approached 30000 km, Chain heard jingles and a big loud noise and Roller's movements became frustrating and decided to replace. Although exchange at Shop is the most certain, I chose to work on my own using Chain Cut & Crimp tool to raise Maintenance Kill
Experience a series of tasks at Events booth before actually exchanging Chain. The work itself is easy, if you apply the Chain Cut & Crimp tool properly to Chain, there is no problem, Be careful before you move Wrench. Just Cut, press fitting, Crimp and everyone seems to have strong power 40 ~ 60N ? It seems to multiply m Torque
In addition to the Chain Cut & Crimp tool, 19 mm and 27 mm Wrench are used, so prepare separately. While experiencing the tool was fixed with a 27 mm Glasses Wrench, a Crimp work was done from the extrusion of Pin with a 19 mm Gear wrench
Worked on successfully completed thanks to the fact that it was possible to practice with published videos and practice at Events booth. Both 19 mm and 27 mm of Wrench went in Glasses Wrench, but 19 mm was easier to use than Gear wrench used for experience work. Do not forget to measure the width of Plate and the Largeness of Pin in Caliper
View detail
Chain and Manufacturer are the same
Not a Joint link formula, Chain while wearing Motorcycle, a new Chain is purchased because it is a Crimp formula.
Included Crimp - In Pin Cutter, when trying to take the old Chain, the attached Crimp - Since it seemed to bend or break the Pin Cutter, it is necessary to apply pressure after surely matching. Also, when Crimp a new Chain, I looked at the part of the old Chain's Crimp.
Initially it is hard to hold and difficult to match, but if you get used to it, I think that it is a good product with Compact.
View detail
I think it's good.
I bought it with Chain to exchange Chain.
I had a Chain Tool, but I did not have a caulking tool.
We also purchased Sale this time.
It took me a while to study the exchange video at YOU TUBE before I worked and studied.
At the time of press fitting, it is set to A, but when crimping it will fit B, so the place there is
I left paper of the manual, so I remembered it.
There was no failure, because I was able to finish work on Smooth Very good tool
I think.
It will be Compact, so it will be appreciated as it can be properly placed in the tool box.
It is convinced to hear that it was originally developed for Enduro.
You can exchange it with confidence from the next time.
View detail
The one delivered at the beginning is a defective item
The thing that arrived at the beginning is bad processing of the Body part, it does not spin the Double-end Wrench, it is regrettable though the thing itself is good at buying MONKEY Wrench.
Also, the correspondence of Manufacturer personnel is bad and this is not good.
(Normally, if things of the house are taken once by calling and you can not leave, if you do not prompt from us, if you do not call us, the attitude of customers who can not be a Large hand company. If you call from here, the official answer that speaks only about the circumstances of your company will not be sent in writing)
I think that the person in charge happened to be bad by chance.
I do not think that the company as a whole looks like this, so I'd like to continue using it in the future.
I'm really sorry.
View detail
Easy to use and high rigidity.
【What made you decide the purchase?】
- Because it was a special tool provided by ChainManufacturer.
【How was it actually used?】
- I can not compare because I have never used other things,
There is no anxiety such as folding or bending of CutPin which is inexpensive and heard well,
Both quality and workability are very well considered products.
[Is there anything I was disappointed about?]
- It is slightly different from disappointment, but it feels slightly expensive.
【Hope for Manufacturer - Please let me know if you have any improvement points]
- In the above-mentioned point, I am happy that it is a price setting that will penetrate the Privater a little more.
【Have you compared items?】
- Inexpensive same function item
View detail