Reviews
good
About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
For Ducati
We replaced it with 996 Rear axle loosening. View detail
Buy Gloves for spring and summer
I purchased the Gloves for spring and summer, they fit well and the mesh material is perfect for the upcoming season. The fist guard is also very secure and comfortable to wear.
It was delivered the day after the purchase date and the delivery was SPIDI.
View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY
Good Rear Carrier
Installation was easy, and I am satisfied with the quality and usability.
I was able to install it on a 23 MD47 with no modifications.
View detail
Reliable Carrier
The installation instruction manual is easy to understand, and the quality of the carriers is perfect.
It is strong enough and secure enough.
It is indeed a DAYTONA product.
View detail
Super loud
I upgraded to 12v and this horn was awesome. it was supper loud and fitted really well, i was super happy with the item and the shipping package ws very safe View detail
DAYTONA PD TypeC
When I use Navigation on my smartphone on a long trip, the battery runs out of charge.
However, with the previous types, it was difficult to charge the battery while using Navigation, but with this type, it is OK.
Charging time is also reduced to Large range.
Satisfied
Note that the plug part will not stick if the plug is too large.
If Cable comes with the phone, no problem.
View detail
Honda go OEMCustomized parts
I have a CB650R 2021 model with Standard Equipment and no helmet lock, but I think I need it for a short break when touring.
Handle mirror hanging is not a relief.
It can be installed by simply popping it on as shown in the OEMCustomized parts section of Honda go.
View detail
Perfect tool bag
I dont like honda genune tool cover .Because it's fast get damages. DATONA tool bag is the perfect size can be with folding and locking tie.All the tools can be attach with seperatly. simply insert exsisting loacation withount any modofication. Webike shipped very fast and well packed .Thank you webike. Recomenderd. View detail
Very convenient
Shield dirt can be easily wiped off at touring destinations.
Having a few copies is quite useful.
It can also be taken out quickly when mass touring and given to the touring party, and it is not too much of a hassle when used up and taken home as garbage.
Moreover, the price is low, so I can use it without hesitation.
I gave some of them to my colleagues and they were delighted.
View detail
I bought this for my Large Motorcycle.
I bought it for my Large Motorcycle which corresponds to Pipe I.D. & phi;28-& phi;53. I used to use Dustcloth but I bought it because the diameter of the Exhaust System is Large and the price is very reasonable. It is very convenient when washing the car, but I sometimes forgot to remove it and put the engine on, so I would like to put a ribbon on it as a marker. View detail
Fits: Others NISSINMaster cylinder tank cap O.D. 59 (some φ61)
Good texture
Cap replacement only, It is easy to install.
The quality is good and I like it very much.
I'm glad that it has a little accent and a custom feel to it.
View detail
Plating is good! Sound is high.
I have been polishing and painting a nearly 50 year old Van Van 75 for the past month or so as a hobby.
When we were finally nearing completion, we realized that the Horn was not sounding. Among several options, we decided on Horn, which has this nice round hole.
Polarity can be either. I also liked the Polished Plating.
View detail
Appearance Refreshing
Purchased to install Hazard switch on DL1000 V-STROM250SX
Hazard relay must be purchased separately
Switch has a Click feel and the controls are excellent.
DL1000 V-STROM250SX has a gap between the switch box and the master cylinder, so it is a just fit.
It is possible to install it in a narrow space, but when installing it on φ22.2mm Handlebar, it is difficult to wrap the rubber for Spacer, and it is a little frustrating to install.
WiringSleeve is not installed in the most conspicuous place, so it would look awkward if Wiring is installed as it is.
FlatSwitch has a Sleeve in it... I put the Wiring together using the WiringSleeve that was created when I trimmed the Wiring on the Hazard relay.
View detail
Fits: その他
RelayBody is slightly larger
Purchased to install Hazard switch on DL1000 V-STROM250SX
The wiring is long enough, so when installing the wiring, it was trimmed down to about 500mm and wired at the Bullet Type Terminal.
Wiring for Position is fixed with Bullet Type Terminal near BlinkerWiring.
I'll install the PositionLED Blinker one of these days when it comes out.
However, for the DL1000 V-STROM250SX, there is a Hazard kit (46234) from DAYTONA, and if you are worried about the wiring process, it would be better to choose that one.
I didn't like the supplied On/Off Switch Flat Face Type (40440 ), so I used a separate Slender Switch. [Flat Seesaw Type] (79339), but the price is about 1,,500 yen higher.
View detail
It would be convenient and easy to have it.
The area around the service power supply on the left side of Shinobazen's lower cowl is full of wiring, which may interfere with cowl removal, so we purchased this product in anticipation of future crisis expansion.
The most difficult thing was the location of the D-unit. Shinobu Sen has a space after the battery under the seat, but the bracket plate was in the way and it was not convenient to use.
The installation wiring is fine, and it will be able to handle additional equipment for a while.
What I have noticed is that
Need appropriate tools (Tester/Inspection TesterElectric Works Pliersetc.).
The Bullet Type Terminal is slightly different in size when connecting to a device, so it is necessary to match one of them.
The Power Supply Cable has become stiffer and tougher to handle in Plus.
The lid of the Case is hard to tighten.
View detail
Daytona usb 18w.Good
Type C usb.Bult qulity good.water proof.cable lenth inought for from head cowul to handle bar mount.good thing is out put port dust seal is replacibale.Main power supply cable along with mini barral fuse.Out pout usb c port is very tiny and simple mount with cable tie Unfotunatly my unit dosent work some time in idel rpm,I'm suspecting volatge detecting(even viltage above 12,4v )Any way im satisfied. Charging is good can be charge phone battery quickly. View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
Upgrade OEM
The Bleeder Bolt from bremboCasting caliperOEM was not very accurate in machining the screw threads, and as I continued to use it, the damage became noticeable, so I decided to use Material:Replaced with Stainless Steel ones. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Z250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Used for city driving
It is used for city driving.
Controllable and good feeling. It is less scary even on rainy days. The price is not too expensive and I like it.
I will report again on durability.
View detail
It's not Kang Tan, right? LOL!
In the product name Kang Tan." but it is not such a kantan to be installed on ELIMINATOR 400.
I don't mean difficult, I mean tedious lol.
To begin with, the problem is on the body side, but the Tank has to be removed in order to install the 4-poleRelay.
This is a pain in the ass, lol.
The product itself is solid, and the Harness fits inside the MeterCowl, so it is a good reflection.
I think it will be around the Handlebar when the retrofit USB Socket is installed, so it will be easy to handle the Wiring! (,,> <,,)
As mentioned earlier, the product received a perfect score except for the 4-poleRelay installation.
View detail