Reviews
Convincing texture
SizeAbout 820×I bought the one of 2000mm 。
I liked the texture of the Nylon raising on the front.
When I unpacked it, there was a smell peculiar to Rubber, so I dried it in the shade for a couple of days.
I was not sure if I wanted to go with a less expensive competitor, but I am satisfied with the DAYTONA product.
View detail
To the OH of SEROW.
I bought it because it is cheap, around OH above the waist of SEROW. Don't forget about Valve compound. View detail
Can also be used for Mirror shield
The Mirror shield of the MotorcycleHelmet can crack or deteriorate when cleaned with aggressive cleaners, but there is no such concern with this product. The Merit of the Largeest Merit is its portability, which allows it to be brought along on day-trips. Even in the summer, water will not fly out of the bag. "Dried out." I am glad that I can use it normally without any problems. View detail
Purchased for Rust removal, surface correction and chamfering.
[Usage]
Bore Up Kit BALI removal, used for rust removal, surface correction, and chamfering, Oil is Daytona Oil stoneOil.
[Feeling of use]
The size is just right to fit in your hand, but be careful not to apply too much pressure or you will shave too much. Use #400 for finishing.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Purchased for chamfering
[Usage]
Used for Bore Up Kit BALI removal and exhaust surface chamfering, using DAYTONAOil stoneOil.
[Feeling of use]
Good size, fits in my hand, easy to use.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
The Oil that is sucked in comes out gradually.
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Brake fluid replacement
Used to replace brake fluid. Until now, it was a plastic bottle. View detail
Quantity:I'd like to have it as a Set.
Straight and Curve tip for convenient use.
Grip is a little hard to hold, it would have been nice to have a thicker and firmer grip.
Apart from this, the Small Rame (Thin) It would be useful to have a Size of
View detail
Multi-purpose use
Size has two of 100? and 250?. After use, it is washed with Parts cleaner, but as shown in the photograph, when use is repeated, yellowish color is formed. This cannot be helped. View detail
Compact
Small size is a little bit difficult to use for the Crank Case Cover.
This, in combination with seal peeling, is helpful because the work can be done rather quickly.
View detail
Definitely useful Goods, couldn't get them all in 100's of dollars!
I thought about whether something similar could be done with 100s of dollars, but in the end it is a dedicated product. It did not come true.
However, at first I didn't quite understand how to use it, and the pictures convinced me SIDE. I was not sure how to use it at first, but after seeing the picture, I was SIDE convinced. Please note, everyone, that at first I did not know how to use the Hook. Wrong." They were hanging....
I was quite lazy and my hands were slow, so Caliper was often in a state of limbo.
It is inevitably necessary to hang it up for maintenance, especially for Caliper rubbing and around the Stem.
As it is, it looks bad for the Hose, especially the opposing 4-pods, which are heavy.
We have purchased this car due to the increase in the number of cars.
Although the cost...may be a factor, we are sure that you will be more satisfied than if you had made it yourself using products from 100-yen stores.
It's well thought out.
Also, even when Caliper is not being touched during maintenance, tools can be hung temporarily, nut storage, etc. Vinyl bag." It can be used as a substitute.
It's convenient
View detail
Size feeling, good effect
I used CRC over it instead of Engine oil. It soaks in quickly, so use it after pouring more oil. It is effective in removing Gasket marks, etc., and the size was just right. View detail
Easy to use with no deflection
When receiving, shifting, and lifting the Oil, there is no deflection and no problem in use.
However, cleaning the container after transferring the waste oil has become a hassle, so the number of times it has been used in recent years has decreased considerably.
View detail
A size is also moderate and quite easy-to-use. The oiler was purchased with two #220, and after polishing by #220, it is finished by #400.
A size is also moderate and quite easy-to-use.
The oiler was purchased with two #220, and after polishing by #220, it is finished by #400.
View detail
Clean shaving.
I bought it because it is made by DAYTONA and I was sure it would work. View detail
Leaks a little, but cosmetic.
It is very useful for repair and maintenance of motorcycles and farm equipment.
I'm not sure how durable it will be, but I'm hopeful.
View detail
Needed for Tappet adjustment!
Adjustment is required when replacing the head or high camshaft during engine tuning.
If you do not ensure a very precise Clearance, it will not only not run properly, but will lead to Engine Blow at worst.
It is better to use this Gauge and make adjustments with the utmost care so that expensive Parts will not be chucked out.
Material is Material:The Stainless Steel construction is resistant to rust, so durability is not a problem.
The thin Gauge, which is the thinnest section we use the most, will get a little distorted if you keep using it, but we have never had a single Trouble with adjustments made with this guy so far.
Although it is a tool that is not used very often, it can expand the range of customization, so we recommend it.
View detail
A guy who can be used for anything.
I use it as a guide when I fill or remove engine oil. The material is very flexible and will keep its shape to a certain extent even if you take your hands off it, so it is safe to use. View detail
To Gasket Stripping!
It is used for Gasket stripping when Engine overhaul.
Be careful not to overdo it or you will scrape the parts.
View detail
Used for Rust removal.
I used it to remove rust.
Quantity of straight and curvy items:It is easy to use because it is Brass and not too hard.
It can be used not only for rust but also for removing stubborn stains if the surface is not painted.
It's also rather sturdy and easy to use.
View detail
For cleaning Radiator fins
I bought this to clean my RadiatorCore.
The Radiator has bugs and tire refuse stuck to it, and there are stains that are difficult to remove with a normal brush, so I chose a cooperative Brass Brush. After all, it's only a Brass Brush, and it removes a lot of dirt. If I could use it for other parts, I think I would use it.
View detail